With cmwq, there's no reason to use a separate workqueue in
cpufreq_spudemand.  Use system_wq instead.  The work items are already
sync canceled on stop, so it's already guaranteed that no work is
running when spu_gov_exit() is entered.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Dave Jones <davej@redhat.com>
Cc: cpufreq@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Fix error test in fan_{read,write}_reg()
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Simplify read file operation for /proc/powerpc/rtas/* interface
by using simple_read_from_buffer.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Simplify several write fileoperations for spufs by using
simple_write_to_buffer().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

32-bit variant of the previous patch for 64-bit:

<<
    When an interrupt occurs in userspace, we can call trace_hardirqs_on/off()
    With one level stack. But if we have irqsoff tracing enabled,
    it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call
    goes two stack frames up. If this is from user space, then there may
    not exist a second stack....
>>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

    When an interrupt occurs in userspace, we can call trace_hardirqs_on/off()
    With one level stack. But if we have irqsoff tracing enabled,
    it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call
    goes two stack frames up. If this is from user space, then there may
    not exist a second stack.

    Add a second stack when calling trace_hardirqs_on/off() otherwise
    the following oops might occur:

    Oops: Kernel access of bad area, sig: 11 [#1]
    PREEMPT SMP NR_CPUS=2 PA Semi PWRficient
    last sysfs file: /sys/block/sda/size
    Modules linked in: ohci_hcd ehci_hcd usbcore
    NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440
    REGS: c00000003e2f3af0 TRAP: 0300   Not tainted  (2.6.37-rc6+)
    MSR: 9000000000001032 <ME,IR,DR>  CR: 48044444  XER: 20000000
    DAR: 00000001ffb9db50, DSISR: 0000000040000000
    TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1
    GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8
    GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000
    GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000
    GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008
    GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950
    GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000
    GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38
    GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70
    NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0
    LR [c0000000000034d4] decrementer_common+0xd4/0x100
    Call Trace:
    [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable)
    [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100
    Instruction dump:
    81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000
    80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050
    ---[ end trace 4ec7fd2be9240928 ]---
Reported-by: NJoerg Sommer <joerg@alea.gnuu.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When we create an alternative feature section, the else case must be the
same size or smaller than the body. This is because when we patch the
else case in we just overwrite the body, so there must be room.

Up to now we just did this by inspection, but it's quite easy to enforce
it in the assembler, so we should.

The only change is to add the ifgt block, but that effects the alignment
of the tabs and so the whole macro is modified.

Also add a test, but #if 0 it because we don't want to break the build.
Anyone who's modifying the feature macros should enable the test.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Unify "numa=" command line option handling
  Revert "x86: Make relocatable kernel work with new binutils"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits)
  sctp: user perfect name for Delayed SACK Timer option
  net: fix can_checksum_protocol() arguments swap
  Revert "netlink: test for all flags of the NLM_F_DUMP composite"
  gianfar: Fix misleading indentation in startup_gfar()
  net/irda/sh_irda: return to RX mode when TX error
  net offloading: Do not mask out NETIF_F_HW_VLAN_TX for vlan.
  USB CDC NCM: tx_fixup() race condition fix
  ns83820: Avoid bad pointer deref in ns83820_init_one().
  ipv6: Silence privacy extensions initialization
  bnx2x: Update bnx2x version to 1.62.00-4
  bnx2x: Fix AER setting for BCM57712
  bnx2x: Fix BCM84823 LED behavior
  bnx2x: Mark full duplex on some external PHYs
  bnx2x: Fix BCM8073/BCM8727 microcode loading
  bnx2x: LED fix for BCM8727 over BCM57712
  bnx2x: Common init will be executed only once after POR
  bnx2x: Swap BCM8073 PHY polarity if required
  iwlwifi: fix valid chain reading from EEPROM
  ath5k: fix locking in tx_complete_poll_work
  ath9k_hw: do PA offset calibration only on longcal interval
  ...

The option name of Delayed SACK Timer should be SCTP_DELAYED_SACK,
not SCTP_DELAYED_ACK.

Left SCTP_DELAYED_ACK be concomitant with SCTP_DELAYED_SACK,
for making compatibility with existing applications.

Reference:
8.1.19.  Get or Set Delayed SACK Timer (SCTP_DELAYED_SACK)
（http://tools.ietf.org/html/draft-ietf-tsvwg-sctpsocket-25)
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Acked-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 03634668 (net offloading: Convert checksums to use
centrally computed features.) mistakenly swapped can_checksum_protocol()
arguments.

This broke IPv6 on bnx2 for instance, on NIC without TCPv6 checksum
offloads.
Reported-by: NHans de Bruin <jmdebruin@xmsnet.nl>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 0ab03c2b.

It breaks several things including the avahi daemon.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to be able to suppress the use of SRAT tables that
32-bit Linux can't deal with (in one case known to lead to a
non-bootable system, unless disabling ACPI altogether), move the
"numa=" option handling to common code.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Reviewed-by: NThomas Renninger <trenn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Renninger <trenn@suse.de>
LKML-Reference: <4D36B581020000780002D0FF@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This reverts commit 86b1e8dd ("x86: Make relocatable kernel work with
new binutils").

Markus Trippelsdorf reported a boot failure caused by this patch.

The real solution to the original patch will likely involve an
arch-generic solution to define an overlaid jiffies_64 and jiffies
variables.

Until that's done and tested on all architectures revert this commit to
solve the regression.
Reported-and-bisected-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: "Lu, Hongjiu" <hongjiu.lu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <4D36A759.60704@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Just stumbled upon the issue while looking for another bug.

The code looks correct, the indentation is not.
Signed-off-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sh_irda can not use RX/TX in same time,
but this driver didn't return to RX mode when TX error occurred.
This patch care xmit error case to solve this issue.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In netif_skb_features() we return only the features that are valid for vlans
if we have a vlan packet.  However, we should not mask out NETIF_F_HW_VLAN_TX
since it enables transmission of vlan tags and is obviously valid.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- tx_fixup() can be called from either timer callback or from xmit()
  in usbnet, so spinlock is added to avoid concurrency-related problem.
- minor correction due to checkpatch warning for some line over 80
  chars after previous patch was applied.
Signed-off-by: NAlexey Orishko <alexey.orishko@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In drivers/net/ns83820.c::ns83820_init_one() we dynamically allocate
memory via alloc_etherdev(). We then call PRIV() on the returned storage
which is 'return netdev_priv()'. netdev_priv() takes the pointer it is
passed and adds 'ALIGN(sizeof(struct net_device), NETDEV_ALIGN)' to it and
returns it. Then we test the resulting pointer for NULL, which it is
unlikely to be at this point, and later dereference it. This will go bad
if alloc_etherdev() actually returned NULL.

This patch reworks the code slightly so that we test for a NULL pointer
(and return -ENOMEM) directly after calling alloc_etherdev().
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a network namespace is created (via CLONE_NEWNET), the loopback
interface is automatically added to the new namespace, triggering a
printk in ipv6_add_dev() if CONFIG_IPV6_PRIVACY is set.

This is problematic for applications which use CLONE_NEWNET as
part of a sandbox, like Chromium's suid sandbox or recent versions of
vsftpd. On a busy machine, it can lead to thousands of useless
"lo: Disabled Privacy Extensions" messages appearing in dmesg.

It's easy enough to check the status of privacy extensions via the
use_tempaddr sysctl, so just removing the printk seems like the most
sensible solution.
Signed-off-by: NRomain Francoise <romain@orebokech.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update bnx2x version to 1.62.00-4
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix AER settings for BCM57712 to allow accessing all device addresses range in CL45 MDC/MDIO
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix BCM84823 LED behavior which may show on some systems
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Device may show incorrect duplex mode for devices with external PHY
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Improve microcode loading verification before proceeding to next stage
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

LED on BCM57712+BCM8727 systems requires different settings
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Common init used to be called by the driver when the first port comes up, mainly to reset and reload external PHY microcode.
However, in case management driver is active on the other port, traffic would halted. So limit the common init to be done only once after POR.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable controlling BCM8073 PN polarity swap through nvm configuration, which is required in certain systems
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (lm93) Add support for LM94

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Validate cpu early in perf_event_alloc()
  perf: Find_get_context: fix the per-cpu-counter check
  perf: Fix contexted inheritance

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Clear irqstack thread_info
  x86: Make relocatable kernel work with new binutils

* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits)
  MIPS: Malta: enable Cirrus FB console
  MIPS: add CONFIG_VIRTUALIZATION for virtio support
  MIPS: Implement __read_mostly
  MIPS: ath79: add common WMAC device for AR913X based boards
  MIPS: ath79: Add initial support for the Atheros AP81 reference board
  MIPS: ath79: add common SPI controller device
  SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs
  MIPS: ath79: add common GPIO buttons device
  MIPS: ath79: add common watchdog device
  MIPS: ath79: add common GPIO LEDs device
  MIPS: ath79: add initial support for the Atheros PB44 reference board
  MIPS: ath79: utilize the MIPS multi-machine support
  MIPS: ath79: add GPIOLIB support
  MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs
  MIPS: jump label: Add MIPS support.
  MIPS: Use WARN() in uasm for better diagnostics.
  MIPS: Optimize TLB handlers for Octeon CPUs
  MIPS: Add LDX and LWX instructions to uasm.
  MIPS: Use BBIT instructions in TLB handlers
  MIPS: Declare uasm bbit0 and bbit1 functions.
  ...

This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

When read valid tx/rx chains from EEPROM, there is a bug to use the
tx chain value for both tx and rx, the result of this cause low
receive throughput on 1x2 devices becuase rx will only utilize single
chain instead of two chains
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ath5k_reset must be called with sc->lock.  Since the tx queue
watchdog runs in a workqueue and accesses sc, it's appropriate
to just take the lock over the whole function.
Signed-off-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Starting from perf_event_alloc()->perf_init_event(), the kernel
assumes that event->cpu is either -1 or the valid CPU number.

Change perf_event_alloc() to validate this argument early. This
also means we can remove the similar check in
find_get_context().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: gregkh@suse.de
Cc: stable@kernel.org
LKML-Reference: <20110118161032.GC693@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If task == NULL, find_get_context() should always check that cpu
is correct.

Afaics, the bug was introduced by 38a81da2 "perf events: Clean
up pid passing", but even before that commit "&& cpu != -1" was
not exactly right, -ESRCH from find_task_by_vpid() is not
accurate.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: gregkh@suse.de
Cc: stable@kernel.org
LKML-Reference: <20110118161008.GB693@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>