The early return inside __intel_fbc_update does not completely check
all the parameters that affect the FBC register values. For example,
we currently lack looking at crtc->adjusted_y (for the fence Y offset)
and all the parameters that affect the CFB size (for i8xx).

Instead of just adding the missing parameters to the check and hoping
that any changes to the fbc_activate functions also come with a
matching change to the __intel_fbc_update check, introduce a new
structure where we store these parameters and use the structure at the
fbc_activate function. Of course, it's still possible to access
everything from dev_priv in those functions, but IMHO the new code
will be harder to break.

v2: Rebase.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-5-git-send-email-paulo.r.zanoni@intel.com

Make our enable/activate checking model more explicit, especially
since we now have intel_fbc_can_activate().
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-4-git-send-email-paulo.r.zanoni@intel.com

Extract all the code that checks if the FBC configuration is valid to
its own function, making __intel_fbc_update() much simpler.
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453210558-7875-3-git-send-email-paulo.r.zanoni@intel.com

Instead of waiting for 50ms, just wait until the next vblank, since
it's the minimum requirement. The whole infrastructure of FBC is based
on vblanks, so waiting for X vblanks instead of X milliseconds sounds
like the correct way to go. Besides, 50ms may be less than a vblank on
super slow modes that may or may not exist.

There are some small improvements in PC state residency (due to the
fact that we're now using 16ms for the common modes instead of 50ms),
but the biggest advantage is still the correctness of being
vblank-based instead of time-based.

v2:
  - Rebase after changing the patch order.
  - Update the commit message.
v3:
  - Fix bogus vblank_get() instead of vblank_count() (Ville).
  - Don't forget to call drm_crtc_vblank_{get,put} (Chris, Ville)
  - Adjust the performance details on the commit message.
v4:
  - Don't grab the FBC mutex just to grab the vblank (Maarten)
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453406585-10233-1-git-send-email-paulo.r.zanoni@intel.com

No functional change
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Fixes: f8d03ea0 ("drm/i915: increase the tries for HDMI hotplug live status checking")
Link: http://patchwork.freedesktop.org/patch/msgid/1454023325-26265-1-git-send-email-mathew.j.martineau@linux.intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>

The test for the qemu q35 south bridge added by commit
"39bfcd52 drm/i915: more virtual south bridge detection"
also matches on real hardware.  Having the check for
virtual systems last in the list is not enough to avoid
that ...

Refine the check by additionally verifying the pci
subsystem id to see whenever it *really* is qemu.

[ v2: fix subvendor tyops ]
Reported-and-tested-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NBruno Wolff III <bruno@wolff.to>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453719748-10944-1-git-send-email-kraxel@redhat.com

The fb_modifiers and cpp arguments passed to intel_tile_width() in
intel_fill_fb_ggtt_view() got accidentally swapped around. I'm pretty
sure I fixed this already, but could be I lost the fix accidentally
during some rebases or something. Anyway, fix it up for real.

Fixes: d9b3288e ("drm/i915: change intel_fill_fb_ggtt_view() to use the real tile size")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-8-git-send-email-ville.syrjala@linux.intel.com
Testcase: igt/kms_rotation_crc/primary-rotation-90
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: drm-intel-fixes@lists.freedesktop.org

We more or less randomly call the "bytes per pixel" value
'cpp', 'bytes_per_pixel', 'pixel_size', or even 'bpp'. Let's just pick
one and stick to it. I've chosen 'cpp'.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-6-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Using 'unsigned long' for ggtt offsets doesn't make much sense. Use
'u32' instead since we've not yet seen a >4GiB ggtt.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-5-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_rotate_fb_obj_pages() doens't need the entire gtt view, just the
rotation info suffices.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-4-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pass stride in addition to width and height to rotate_pages(). For now
width and stride are the same, but once framebuffer offsets enter the
scene that may no longer be the case.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-3-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Also rename 'rotation_info' to 'rotated' to match the view type exactly,
this should avoid confusion which union members is valid for each view
type.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453316739-13296-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the error-handling paths of i915_gem_do_execbuffer() and
intel_crtc_page_flip(), the local pointer-to-request variables
were expected to be either valid pointers or NULL. Since

  26827088 drm/i915: simplify allocation of driver-internal requests

they could also be ERR_PTR() values, so the tests need to be
updated to accommodate this case.
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453978089-29127-1-git-send-email-tvrtko.ursulin@linux.intel.com

In GuC mode LRC pinning lifetime depends exclusively on the
request liftime. Since that is terminated by the seqno update
that opens up a race condition between GPU finishing writing
out the context image and the driver unpinning the LRC.

To extend the LRC lifetime we will employ a similar approach
to what legacy ringbuffer submission does.

We will start tracking the last submitted context per engine
and keep it pinned until it is replaced by another one.

Note that the driver unload path is a bit fragile and could
benefit greatly from efforts to unify the legacy and exec
list submission code paths.

At the moment i915_gem_context_fini has special casing for the
two which are potentialy not needed, and also depends on
i915_gem_cleanup_ringbuffer running before itself.

v2:
 * Move pinning into engine->emit_request and actually fix
   the reference/unreference logic. (Chris Wilson)

 * ring->dev can be NULL on driver unload so use a different
   route towards it.

v3:
 * Rebase.
 * Handle the reset path. (Chris Wilson)
 * Exclude default context from the pinning - it is impossible
   to get it right before default context special casing in
   general is eliminated.

v4:
 * Rebased & moved context tracking to
   intel_logical_ring_advance_and_submit.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Issue: VIZ-4277
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453976997-25424-1-git-send-email-tvrtko.ursulin@linux.intel.com

Will enable cleaner implementation of a following fix and
easier code unification in the future.

Idea and code by Chris Wilson.

v2: Do not return before last_contexts on engines are unpinned.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>

Will simplify the following fix and sounds logical.

v2: Add some whitespace to separate logic better. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>

Previously intel_lr_context_(un)pin were operating on requests
which is in conflict with their names.

If we make them take a context and an engine, it makes the names
make more sense and it also makes future fixes possible.

v2: Rebase for default_context/kernel_context change.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Nick Hoath <nicholas.hoath@intel.com>

This got broken in:

   commit de1add36
   Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
   Date:   Fri Jan 15 15:12:50 2016 +0000

       drm/i915: Decouple execbuf uAPI from internal implementation

BSD ring flags need to be shifted before they can be considered
indices into the ring array.

Reported by Zhipeng Gong.

v2: Simplify the code. (Chris Wilson)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhipeng Gong <zhipeng.gong@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453902069-31353-1-git-send-email-tvrtko.ursulin@linux.intel.com
Testcase: igt/gem_exec_basic # bdw-gt3

The only device specific dependency of the stolen memory setup is the
MMIO mapping and the stolen memory size. Both are already available in
i915_gtt_init(), so move the stolen initialization to there. The
clean-up code for i915_gtt_init() is in i915_global_gtt_cleanup(), so
move the stolen memory clean-up code there too.

This will be needed by an upcoming patch that needs the details of the
memory we reserve, but the change is also part of our generic goal to
move the initialization of resources with no or little dependencies on
other device specific resources towards the beginning of the init
sequence.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-8-git-send-email-imre.deak@intel.com

Move the MCHBAR setup right after the MMIO setup, since the two things
are logically related and the MCHBAR setup code doesn't depend on any
other device specific resource. We'll also need MCHBAR to be ready
earlier in an upcoming patch, so this is also a preparation for that.

Factor out the init/clean-up code to separate functions to make things
clearer in the i915_driver_load()/unload() functions.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-7-git-send-email-imre.deak@intel.com

Workqueue initalization doesn't depend on any other device specific
resource, so move it close to the beginning, so we don't need to
consider them when thinking about dependencies for other resources.

Also factor out things to separate init/cleanup functions to make
i915_driver_load()/unload() clearer, atm it's somewhat difficult to
follow there in what order resources are inited/cleaned-up.
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-6-git-send-email-imre.deak@intel.com

Factor out common clean-up code for the GEM load time init function.
Also rename i915_gem_load() to i915_gem_load_init() to have a better
match with its new clean-up function.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-5-git-send-email-imre.deak@intel.com

Factor out the common GEM shrinker clean-up code and call the shrinker
init function from the same function from where the corresponding
shrinker clean-up function is called. Also add sanity checking to the
shrinker and OOM registration calls.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-4-git-send-email-imre.deak@intel.com

Clarify the name of the label on the error path, making it clear what's
being cleaned up. The kmem_cache_destroy() calls are NOPs on the
corresponding error path.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-3-git-send-email-imre.deak@intel.com

commit ebae38d0
Author: Animesh Manna <animesh.manna@intel.com>
Date:   Wed Oct 28 23:58:55 2015 +0200

    drm/i915/gen9: csr_init after runtime pm enable

moved the DMC/CSR initialization later during driver loading, but didn't
move the cleanup earlier correspondingly during unloading. Fix this up.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NDavid Weinehall <david.weinehall@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453209992-25995-2-git-send-email-imre.deak@intel.com

This reverts commit 1803c035.

It seems to blow up on module unload due to a use-after free hitting a
BUG_ON with CONFIG_DEBUG_SG. Quoting from Tvrtko's mail:

"I've decoded the instructions and it pointed to SG_MAGIC checking:

488b8098010000  mov 0x198(%rax),%rax
ba21436587      mov $0x87654321,%edx
488b00          mov (%rax),%rax       *** CRASH

"Grep showed 0x87654321 is SG_MAGIC, so likely candidate for this code
pattern is:

static inline struct page *sg_page(struct scatterlist *sg)
{
    BUG_ON(sg->sg_magic != SG_MAGIC);
    BUG_ON(sg_is_chain(sg));
    return (struct page *)((sg)->page_link & ~0x3);
}

"Which would mean the offender is in intel_logical_ring_cleanup is most
likely:

...
    if (ring->status_page.obj) {
        kunmap(sg_page(ring->status_page.obj->pages->sgl));
        ring->status_page.obj = NULL;
    }
...

"I think that the i915_gem_context_fini will do a final unref on
dev_priv->kernel_context and then the ring buff has a copy which is
left dangling because:

    lrc_setup_hardware_status_page(ring,
        dev_priv->kernel_context->engine[ring->id].state);

and:

ring->status_page.obj = default_ctx_obj;

"Where default_ctx_obj == dev_priv->kernel_context->engine[ring->id].state
So indeed looks like the unload ordering is the trigger.  In fact it
is almost the same fragility wrt/ kernel_context hidden dependency I
expressed my worry about in an e-mail yesterday or so. It only shows
if CONFIG_DEBUG_SG is set, otherwise it accesses freed memory and
probably just survives."

This causes serious trouble in our CI system since it took out all
gen8+ machines. Not yet clear why this wasn't caught in pre-merge
testing.

Backtrace from CI, for posterity:

[  163.737836] general protection fault: 0000 [#1] PREEMPT SMP
[  163.737849] Modules linked in: ax88179_178a usbnet mii snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915(-) x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm mei_me mei i2c_hid e1000e ptp pps_core [last unloaded: snd_hda_intel]
[  163.737902] CPU: 0 PID: 5812 Comm: rmmod Tainted: G     U  W       4.5.0-rc1-gfxbench+ #1
[  163.737911] Hardware name: System manufacturer System Product Name/Z170M-PLUS, BIOS 0505 11/16/2015
[  163.737920] task: ffff8800bb99cf80 ti: ffff88022ff2c000 task.ti: ffff88022ff2c000
[  163.737928] RIP: 0010:[<ffffffffa018f723>]  [<ffffffffa018f723>] intel_logical_ring_cleanup+0x83/0x100 [i915]
[  163.737969] RSP: 0018:ffff88022ff2fd30  EFLAGS: 00010282
[  163.737975] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8800bb2f31b8 RCX: 0000000000000002
[  163.737982] RDX: 0000000087654321 RSI: 000000000000000d RDI: ffff8800bb2f31f0
[  163.737989] RBP: ffff88022ff2fd40 R08: 0000000000000000 R09: 0000000000000001
[  163.737996] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800bb2f0000
[  163.738003] R13: ffff8800bb2f8fc8 R14: ffff8800bb285668 R15: 000055af1ae55210
[  163.738010] FS:  00007f187014b700(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[  163.738021] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  163.738030] CR2: 0000558f84e4cbc8 CR3: 000000022cd55000 CR4: 00000000003406f0
[  163.738039] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  163.738048] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  163.738057] Stack:
[  163.738062]  ffff8800bb2f31b8 ffff8800bb2f0000 ffff88022ff2fd70 ffffffffa0180414
[  163.738079]  ffff8800bb2f0000 ffff8800bb285668 ffff8800bb2856c8 ffffffffa0242460
[  163.738094]  ffff88022ff2fd98 ffffffffa0202d30 ffff8800bb285668 ffff8800bb285668
[  163.738109] Call Trace:
[  163.738140]  [<ffffffffa0180414>] i915_gem_cleanup_engines+0x34/0x60 [i915]
[  163.738185]  [<ffffffffa0202d30>] i915_driver_unload+0x150/0x270 [i915]
[  163.738198]  [<ffffffff815100f4>] drm_dev_unregister+0x24/0xa0
[  163.738208]  [<ffffffff815106ce>] drm_put_dev+0x1e/0x60
[  163.738225]  [<ffffffffa01412a0>] i915_pci_remove+0x10/0x20 [i915]
[  163.738237]  [<ffffffff8143d9b4>] pci_device_remove+0x34/0xb0
[  163.738249]  [<ffffffff81533d15>] __device_release_driver+0x95/0x140
[  163.738259]  [<ffffffff81533eb6>] driver_detach+0xb6/0xc0
[  163.738268]  [<ffffffff81532de3>] bus_remove_driver+0x53/0xd0
[  163.738278]  [<ffffffff815348d7>] driver_unregister+0x27/0x50
[  163.738289]  [<ffffffff8143ca15>] pci_unregister_driver+0x25/0x70
[  163.738299]  [<ffffffff81511de4>] drm_pci_exit+0x74/0x90
[  163.738337]  [<ffffffffa02034a9>] i915_exit+0x20/0x1a5 [i915]
[  163.738349]  [<ffffffff8110400f>] SyS_delete_module+0x18f/0x1f0
[  163.738361]  [<ffffffff817b8a9b>] entry_SYSCALL_64_fastpath+0x16/0x73
[  163.738370] Code: ff d0 48 89 df e8 de a1 fd ff 48 8d 7b 38 e8 25 ab fd ff 48 8b 83 90 00 00 00 48 85 c0 74 25 48 8b 80 98 01 00 00 ba 21 43 65 87 <48> 8b 00 48 39 10 75 3c f6 40 08 01 75 38 48 c7 83 90 00 00 00
[  163.738459] RIP  [<ffffffffa018f723>] intel_logical_ring_cleanup+0x83/0x100 [i915]
[  163.738498]  RSP <ffff88022ff2fd30>
[  163.738507] ---[ end trace 68f69ce4740fa44f ]---

Cc: Nick Hoath <nicholas.hoath@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Tested-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Swap the order of context & engine cleanup, so that contexts are cleaned
up first, and *then* engines. This is a more sensible order anyway, but
in particular has become necessary since the 'intel_ring_initialized()
must be simple and inline' patch, which now uses ring->dev as an
'initialised' flag, so it can now be NULL after engine teardown. This
in turn can cause a problem in the context code, which (used to) check
the ring->dev->struct_mutex -- causing a fault if ring->dev was NULL.

Also rename the cleanup function to reflect what it actually does
(cleanup engines, not a ringbuffer), and fix an annoying whitespace issue.

v2: Also make the fix in i915_load_modeset_init, not just in
    i915_driver_unload (Chris Wilson)
v3: Had extra stuff in it.
v4: Reverted extra stuff (so we're back to v2).
    Rebased and updated commentary above (Dave Gordon).
Signed-off-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453405067-32890-3-git-send-email-david.s.gordon@intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The generic interval tree we use to speed up range invalidation is an
augmented rbtree that can report all overlapping intervals for a given
range. Therefore we do not need to degrade to a linear list if we find
overlapping objects. Oops.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453397563-2848-1-git-send-email-chris@chris-wilson.co.ukReviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is mainly required for future enabling of pre-emptive
command execution.

v2: explain purpose of change (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-9-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Per context preemption granularity control is only available from SKL:E0+

Actual WA is to disable percontext preemption granularity control until D0
which is the default case so this is equivalent to the inverse of
WaDisablePerCtxtPreemptionGranularityControl:skl

v2: add some detail to commit msg (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-8-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Required for WaDisableLSQCROPERFforOCL:skl

This register is added to HW whitelist to support WA required for future
enabling of pre-emptive command execution, WA implementation will be in
userspace and it cannot program this register if it is not on HW whitelist.

v2: explain purpose of changes (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-7-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Required for WaDisableLSQCROPERFforOCL:bxt

According to WA database these are only applicable for BXT:A0 but since
A0 and A1 shares the same GT these are extended for A1 as well.

This register is added to HW whitelist to support WA required for future
enabling of pre-emptive command execution, WA implementation will be in
userspace and it cannot program this register if it is not on HW whitelist.

v2: explain purpose of changes (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-6-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Required for,
WaDisableObjectLevelPreemptionForTrifanOrPolygon:bxt
WaDisableObjectLevelPreemptionForInstancedDraw:bxt
WaDisableObjectLevelPreemtionForInstanceId:bxt

According to WA database these are only applicable for BXT:A0 but since
A0 and A1 shares the same GT these are extended for A1 as well.

These are also required for SKL until B0 but not adding them because they
are pre-production steppings.

This register is added to HW whitelist to support WA required for future
enabling of pre-emptive command execution, WA implementation will be in
userspace and it cannot program this register if it is not on HW whitelist.

v2: use lower case in register defines (Nick)
v3: explain purpose of changes (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-5-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Required for WaAllowUMDToModifyHDCChicken1:skl,bxt

This register is added to HW whitelist to support WA required for future
enabling of pre-emptive command execution, WA implementation will be in
userspace and it cannot program this register if it is not on HW whitelist.

v2: explain purpose of changes (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-4-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Required for WaEnablePreemptionGranularityControlByUMD:skl,bxt

This register is added to HW whitelist to support WA required for future
enabling of pre-emptive command execution, WA implementation will be in
userspace and it cannot program this register if it is not on HW whitelist.

v2: explain purpose of WA (Chris)
Reviewed-by: NNick Hoath <nicholas.hoath@intel.com>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-3-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some of the HW registers are privileged and cannot be written to from
non-privileged batch buffers coming from userspace unless they are added to
the HW whitelist. This whitelist is maintained by HW and it is different from
SW whitelist. Userspace need write access to them to implement preemption
related WA.

The reason for using this approach is, the register bits that control
preemption granularity at the HW level are not context save/restored; so even
if we set these bits always in kernel they are going to change once the
context is switched out.  We can consider making them non-privileged by
default but these registers also contain other chicken bits which should not
be allowed to be modified.

In the later revisions controlling bits are save/restored at context level but
in the existing revisions these are exported via other debug registers and
should be on the whitelist. This patch adds changes to provide HW with a list
of registers to be whitelisted. HW checks this list during execution and
provides access accordingly.

HW imposes a limit on the number of registers on whitelist and it is
per-engine.  At this point we are only enabling whitelist for RCS and we don't
foresee any requirement for other engines.

The registers to be whitelisted are added using generic workaround list
mechanism, even these are only enablers for userspace workarounds. But by
sharing this mechanism we get some test assets without additional cost (Mika).

v2: rebase

v3: parameterize RING_FORCE_TO_NONPRIV() as _MMIO() should be limited to
i915_reg.h (Ville), drop inline for wa_ring_whitelist_reg (Mika).

v4: improvements suggested by Chris Wilson.
Clarify that this is HW whitelist and different from the one maintained in
driver. This list is engine specific but it gets initialized along with other
WA which is RCS specific thing, so make it clear that we are not doing any
cross engine setup during initialization.
Make HW whitelist count of each engine available in debugfs.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453412634-29238-2-git-send-email-arun.siluvery@linux.intel.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Commit 5bab6f60 ("drm/i915: Serialise updates to GGTT with access
through GGTT on Braswell") depended upon a working stop_machine() and
so forced the selection of STOP_MACHINE. However, commit 86fffe4a
("kernel: remove stop_machine() Kconfig dependency") removed the option
STOP_MACHINE from init/Kconfig and ensured that stop_machine()
universally works. Due to the order in which the patches were applied,
removing the select from DRM_I915 got lost during merging.

Remove the now obsolete select statement.
Signed-off-by: NAndreas Ziegler <andreas.ziegler@fau.de>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453722079-2604-1-git-send-email-andreas.ziegler@fau.de
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Previously GuC uses ring id as engine id because of same definition.
But this is not true since this commit:

commit de1add36
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Fri Jan 15 15:12:50 2016 +0000

    drm/i915: Decouple execbuf uAPI from internal implementation

Added GuC engine id into GuC interface to decouple it from ring id used
by driver.

v2: Keep ring name print out in debugfs; using for_each_ring() where
    possible to keep driver consistent. (Chris W.)
Signed-off-by: NAlex Dai <yu.dai@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453579094-29860-1-git-send-email-yu.dai@intel.com

Since:

commit 82352e90
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Fri Jan 15 17:12:45 2016 +0000

    drm/i915: Cache LRC state page in the context

and:

commit 0eb973d3
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Fri Jan 15 15:10:28 2016 +0000

    drm/i915: Cache ringbuffer GTT VMA

We can also remove the ring buffer start updates on every
context update since the address will not change for the
duration of the LRC pin.

For GuC we can remove the update altogether because it
only cares about the ring buffer start.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Alex Dai <yu.dai@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1453466567-33369-1-git-send-email-tvrtko.ursulin@linux.intel.com

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>