In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: "Antti Seppälä" <a.seppala@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David Härdeman" <david@hardeman.nu>
Cc: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The atomisp driver uses the videobuf1 framework for buffer management. The
framework is being removed; switch to videobuf2 needs to be made. There
are only a handful of remaining non-staging drivers using videobuf1.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Snail address is subject to change, remove it completely from the code.

This has been done using the following script:

	sed -i '/You should/,/02110-1301/d' \
		$(git grep -n -w Franklin -- drivers/staging/media/atomisp/ | cut -f1 -d:)

No functional change intended.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

media/lm3642.h is not used anywhere. Moreover, there is a driver under
LEDs framework for very same IP which would be used anyway.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

struct camera_af_platform_data and bound functions are not used anywhere.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Remove unused members along with dead code.

Mostly done with help of coccinelle.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There are 3 declarations that are present in atomisp_platform.h and
atomisp_gmin_platform.h. Remove duplications from the latter.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is redundant callback which does nothing in upstreamed version of
the driver.

Remove it along with user call places.

Mostly done with help of coccinelle.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is redundant callback which does nothing in upstreamed version of
the driver.

Remove it along with user call places.

Mostly done with help of coccinelle.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

GPIO handling is done only in two modules, the rest do not need to
include linux/gpio.h header.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

gpiod_get() configures GPIO line at the time of successful request.
Thus, no need to do this explicitly.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since most of the drivers are being used on ACPI enabled platforms
there is no need to keep legacy API support for them. Thus, switch
to ->probe_new() callback and remove orphaned code.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is done using coccinelle semantic patch:

//<smpl>
@a@
identifier f, x;
@@
-static f(...) { return i2c_add_driver(&x); }

@b depends on a@
identifier e, a.x;
@@
-static e(...) { i2c_del_driver(&x); }

@c depends on a && b@
identifier a.f;
declarer name module_init;
@@
-module_init(f);

@d depends on a && b && c@
identifier b.e, a.x;
declarer name module_exit;
declarer name module_i2c_driver;
@@
-module_exit(e);
+module_i2c_driver(x);
//</smpl>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This sensor is not used by any known ACPI-enabled platform
(and no kernel users for it so far).

Just remove it for good until we get a platform which actually uses it.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This sensor is not used by any known ACPI-enabled platform
(and no kernel users for it so far).

Just remove it for good until we get a platform which actually uses it.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Daeseok Youn <daeseok.youn@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: devel@driverdev.osuosl.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Logging of explicit out of memory messages is redundant since memory allocation
failures produce a backtrace.

Done with the help of the following cocci script:

@@
expression ex, ret;
statement s;
constant char[] c;
constant err;
identifier f, l;
@@

ex =
\(kmalloc\|kmalloc_array\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|devm_kzalloc\)(...)
... when != ex

if (
(
!ex
|
unlikely(!ex)
)
)
- {
- f(..., c, ...);
(
return ex;
|
return;
|
return err;
|
goto l;
)
- }
else s
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The use of typedefs for struct is discouraged, and hence can be
eliminated. Done using the following semantic patch by coccinelle.

@r1@
type T;
@@

typedef struct {...} T;

@script: python p@
T << r1.T;
T1;
@@

if T[-2:] == "_t" or T[-2:] == "_T":
        coccinelle.T1 = T[:-2]
else:
        coccinelle.T1 = T

print T, T1
@r2@
type r1.T;
identifier p.T1;
@@

- typedef
struct
+ T1
{
...
}
- T
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/platform/atmel/atmel-isc.c: In function 'isc_async_complete':
drivers/media/platform/atmel/atmel-isc.c:1900:28: warning: variable 'sd_entity' set but not used [-Wunused-but-set-variable]
  struct isc_subdev_entity *sd_entity;
                            ^~~~~~~~~
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is a NEC protocol type remote controller distributed with
96boards poplar@tocoding board.
Signed-off-by: NYounian Wang <wangyounian@hisilicon.com>
Signed-off-by: NJiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This is a NEC protocol type remote controller distributed with
hisilicon TV demo boards.
Signed-off-by: NYounian Wang <wangyounian@hisilicon.com>
Signed-off-by: NJiancheng Xue <xuejiancheng@hisilicon.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

It seems that the return value of usb_ifnum_to_if() can be NULL and
needs to be checked.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Tested-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

For memory allocation functions that fail with a NULL return value, it
is preferred to use the (!x) test in place of (x == NULL).

Changes in atomisp2/css2400/sh_css.c were done by hand.

Done with the help of the following cocci script:

@@
type T;
T* p;
statement s,s1;
@@

p =
  \(devm_kzalloc\|devm_ioremap\|usb_alloc_urb\|alloc_netdev\|dev_alloc_skb\|
   kmalloc\|kmalloc_array\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
   kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\|devm_kzalloc\)(...)
...when != p

if (
- p == NULL
+ !p
 ) s
 else s1

--
Changes in v3:
  Rebase changes over atomisp-next branch of the media tree
Changes in atomisp2/css2400/sh_css.c were done by hand, the above script
was not able to match the pattern if (a->b != null).
Signed-off-by: NAishwarya Pant <aishpant@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The common-clk core expects clk consumers to always call enable/disable
in a balanced manner. The atomisp driver does not call gmin_flisclk_ctrl()
in a balanced manner, so add a clock_on bool and skip redundant calls.

This fixes kernel oops like this one:

[   19.811613] gc0310_s_config S
[   19.811655] ------------[ cut here ]------------
[   19.811664] WARNING: CPU: 1 PID: 720 at drivers/clk/clk.c:594 clk_core_disabl
[   19.811666] Modules linked in: tpm_crb(+) snd_soc_sst_atom_hifi2_platform tpm
[   19.811744] CPU: 1 PID: 720 Comm: systemd-udevd Tainted: G         C OE   4.1
[   19.811746] Hardware name: Insyde T701/T701, BIOS BYT70A.YNCHENG.WIN.007 08/2
[   19.811749] task: ffff988df7ab2500 task.stack: ffffac1400474000
[   19.811752] RIP: 0010:clk_core_disable+0xc0/0x130
...
[   19.811775] Call Trace:
[   19.811783]  clk_core_disable_lock+0x1f/0x30
[   19.811788]  clk_disable+0x1f/0x30
[   19.811794]  gmin_flisclk_ctrl+0x87/0xf0
[   19.811801]  0xffffffffc0528512
[   19.811805]  0xffffffffc05295e2
[   19.811811]  ? acpi_device_wakeup_disable+0x50/0x60
[   19.811815]  ? acpi_dev_pm_attach+0x8e/0xd0
[   19.811818]  ? 0xffffffffc05294d0
[   19.811823]  i2c_device_probe+0x1cd/0x280
[   19.811828]  driver_probe_device+0x2ff/0x450

Fixes: "staging: atomisp: use clock framework for camera clocks"
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The TC358743 does not support more than 4 data lanes. Check that the
lane count is valid.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

ref docuemnt:
  ov5647-datasheet-v1.00-2009
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: NLuis Oliveira <lolivei@synopsys.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When I was supporting Rpi Camera Module on the ASUS Tinker board,
I found this driver have some issues with rockchip's mipi-csi driver.
It didn't place clock lane in LP-11 state before performing
D-PHY initialisation.

>From our experience, on some OV sensors,
LP-11 state is not achieved while BIT(5)-0x4800 is cleared.

So let's set BIT(5) and BIT(0) both while not streaming, in order to
coax the clock lane into LP-11 state.

0x4800 : MIPI CTRL 00
	BIT(5) : clock lane gate enable
		0: continuous
		1: none-continuous
	BIT(0) : manually set clock lane
		0: Not used
		1: used
Signed-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Reviewed-by: NLuis Oliveira <lolivei@synopsys.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the ov7670_s_power function which is responsible for
manipulating the power dowm mode through the PWDN pin and the reset
operation through the RESET pin, and keep it powered at all times.

[sakari.ailus@linux.intel.com: set pwdn_gpio direction only once]
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the get_fmt callback, also enable V4L2_SUBDEV_FL_HAS_DEVNODE flag
to make this subdev has device node.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Add the media entity pads initialization.
Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

This driver adds support for the Tegra CEC IP. It is based on the
NVIDIA drivers/misc/tegra-cec driver in their 3.10 kernel.

This has been converted to the CEC framework and cleaned up.

Tested with my Jetson TK1 board. It has also been tested with the
Tegra X1 in an embedded product.

Note of warning for the Tegra X2: this SoC supports two HDMI outputs,
but only one CEC adapter and the CEC bus is shared between the
two outputs. This is a design mistake and the CEC adapter can
control only one HDMI output. Never hook up both HDMI outputs
to the CEC bus in a hardware design: this is illegal as per the
CEC specification.

The CEC bus can be shared between multiple inputs and zero or one
outputs, but not between multiple outputs.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to use a variable to store this constant calculated at
compile time.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)
Signed-off-by: NJérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The functions __bo_alloc, __bo_search_and_remove_from_free_rbtree,
__bo_search_by_addr, __bo_search_by_addr_in_range, __bo_break_up and
__bo_merge  are local to the source and do not need to be in the global
scope, so make them static.

Cleans up sparse warnings:

warning: symbol '__bo_alloc' was not declared. Should it be static?
warning: symbol '__bo_search_and_remove_from_free_rbtree' was not declared. Should it be static?
warning: symbol '__bo_search_by_addr' was not declared. Should it be static?
warning: symbol '__bo_search_by_addr_in_range' was not declared. Should it be static?
warning: symbol '__bo_break_up' was not declared. Should it be static?
warning: symbol '__bo_merge' was not declared. Should it be static?
Signed-off-by: NMuhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

There was no specific item regarding what should be done to sensor, lens
and flash drivers. Add one, to replace the vague item denoting support
only to particular sensor, lens and flash devices.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

By adding the "atomisp-" prefix to module names (and "ATOMISP_" to Kconfig
options), the staging drivers for e.g. sensors are labelled as being
specific to atomisp, which they effectively are.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The imx274 is a Sony CMOS image sensor that has 1/2.5 image size.
It supports up to 3840x2160 (4K) 60fps, 1080p 120fps. The interface
is 4-lane MIPI CSI-2 running at 1.44Gbps each.

This driver has been tested on Xilinx ZCU102 platform with a Leopard
LI-IMX274MIPI-FMC camera board.

Support for the following features:
-Resolutions: 3840x2160, 1920x1080, 1280x720
-Frame rate: 3840x2160 : 5 – 60fps
            1920x1080 : 5 – 120fps
            1280x720 : 5 – 120fps
-Exposure time: 16 – (frame interval) micro-seconds
-Gain: 1x - 180x
-VFLIP: enable/disabledrivers/media/i2c/imx274.c
-Test pattern: 12 test patterns
Signed-off-by: NLeon Luo <leonl@leopardimaging.com>
Tested-by: NSören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

The TC358743 is an HDMI to MIPI CSI2-2 bridge.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

When using VDIC with CSI1, make sure to select the correct CSI in
IPU_CONF.

Fixes: f0d9c892 ("[media] media: imx: Add IC subdev drivers")
Suggested-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NTim Harvey <tharvey@gateworks.com>
Acked-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>