Make recover_inline_xattr() static, because this function is
used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch replace some general codes with redirty_page_for_writepage, which
can be enabled after consideration on additional procedure like counting dirty
pages appropriately.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch use list_for_each_entry{_safe} instead of list_for_each{_safe} for
simplfying code.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Move kmem_cache_free out of spinlock protection region for better performance.

Change log from v1:
 o remove spinlock protection for kmem_cache_free in destroy_node_manager
suggested by Jaegeuk Kim.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

During the cleaing of node segments, F2FS can get errored node blocks due to
data race between node page lock and its valid bitmap operations.
In that case, it needs to return an error to skip such the obsolete block copy.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If multiple redundant fsync calls are triggered, we don't need to write its
node pages with fsync mark continuously.

So, this patch adds FI_NEED_FSYNC to track whether the latest node block is
written with the fsync mark or not.
If the mark was set, a new fsync doesn't need to write a node block.
Otherwise, we should do a new node block with the mark for roll-forward
recovery.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The NM_WOUT_THRESHOLD is now obsolete since f2fs starts to control on a basis
of the memory footprint.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces ram_thresh, a sysfs entry, which controls the memory
footprint used by the free nid list and the nat cache.

Previously, the free nid list was controlled by MAX_FREE_NIDS, while the nat
cache was managed by NM_WOUT_THRESHOLD.
However, this approach cannot be applied dynamically according to the system.

So, this patch adds ram_thresh that users can specify the threshold, which is
in order of 1 / 1024.
For example, if the total ram size is 4GB and the value is set to 10 by default,
f2fs tries to control the number of free nids and nat caches not to consume over
10 * (4GB / 1024) = 10MB.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The try_to_free_nats should not receive the negative nr_shrink.
Otherwise, it can drop all the nat entries by the while loop.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If a page is on writeback, f2fs can face with deadlock due to under writepages.
This is caused by merging IOs inside f2fs, so if it comes to detect, let's throw
merged IOs, which is implemented by f2fs_wait_on_page_writeback.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces nr_pages_to_write to align page writes to the segment
or other operational unit size, which can be tuned according to the system
environment.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch increases pages_skipped when skipping writepages.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces nr_pages_to_skip(sbi, type) to determine writepages can
be skipped.
The dentry, node, and meta pages can be conrolled by F2FS without breaking the
FS consistency.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a help function f2fs_has_xattr_block for better
readability.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a help function f2fs_has_inline_xattr for better
readability.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously we do not recover inline xattr data of inode after power-cut, so
inline xattr data may be lost.
We should recover the data during the roll-forward process.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Previously, we ra_sum_pages to pre-read contiguous pages as more
as possible, and if we fail to alloc more pages, an ENOMEM error
will be reported upstream, even though we have alloced some pages
yet. In fact, we can use the available pages to do the job partly,
and continue the rest in the following circle. Only reporting ENOMEM
upstream if we really can not alloc any available page.

And another fix is ignoring dealing with the following pages if an
EIO occurs when reading page from page_list.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: modify the flow for better neat code]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Integrated a couple of minor changes for better readability suggested by
Chao Yu.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

We should de-account dirty counters for page when redirty in ->writepage().

Wu Fengguang described in 'commit 971767ca':
"writeback: fix dirtied pages accounting on redirty
De-account the accumulative dirty counters on page redirty.

Page redirties (very common in ext4) will introduce mismatch between
counters (a) and (b)

a) NR_DIRTIED, BDI_DIRTIED, tsk->nr_dirtied
b) NR_WRITTEN, BDI_WRITTEN

This will introduce systematic errors in balanced_rate and result in
dirty page position errors (ie. the dirty pages are no longer balanced
around the global/bdi setpoints)."
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces a radix tree for the list of free_nids, which enhances
the performance on free nid management.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help macro on_build_free_nids() which just uses build_lock
to judge whether the building free nid is going, so that we can remove
the on_build_free_nids field from f2fs_sb_info.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
[Jaegeuk Kim: remove an unnecessary white line removal]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The nat cache entry maintains a status whether it is checkpointed or not.
So, if a new cache entry is loaded from the last checkpoint,
nat_entry->checkpointed should be true.
If the cache entry is modified as being dirty, nat_entry->checkpoint should
be false.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Total nids that f2fs can use should not include 0, nid for node inode, and nid
for meta inode.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch help us to cleanup the readahead code by merging ra_{sit,nat}_pages
function into ra_meta_pages.
Additionally the new function is used to readahead cp block in
recover_orphan_inodes.

Change log from v1:
 o fix a deadloop bug pointed by Jaegeuk Kim.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If a new xattr node page was allocated and its inode is fsynced, we should
recover the xattr node page during the roll-forward process after power-cut.
But, previously, f2fs didn't handle that case, resulting in kernel panic as
follows reported by Tom Li.

BUG: unable to handle kernel paging request at ffffc9001c861a98
IP: [<ffffffffa0295236>] check_index_in_prev_nodes+0x86/0x2d0 [f2fs]
Call Trace:
 [<ffffffff815ece9b>] ? printk+0x48/0x4a
 [<ffffffffa029626a>] recover_fsync_data+0xdca/0xf50 [f2fs]
 [<ffffffffa02873ae>] f2fs_fill_super+0x92e/0x970 [f2fs]
 [<ffffffff8112c9f8>] mount_bdev+0x1b8/0x200
 [<ffffffffa0286a80>] ? f2fs_remount+0x130/0x130 [f2fs]
 [<ffffffffa0285e40>] f2fs_mount+0x10/0x20 [f2fs]
 [<ffffffff8112d4de>] mount_fs+0x3e/0x1b0
 [<ffffffff810ef4eb>] ? __alloc_percpu+0xb/0x10
 [<ffffffff8114761f>] vfs_kern_mount+0x6f/0x120
 [<ffffffff811497b9>] do_mount+0x259/0xa90
 [<ffffffff810ead1d>] ? memdup_user+0x3d/0x80
 [<ffffffff810eadb3>] ? strndup_user+0x53/0x70
 [<ffffffff8114a2c9>] SyS_mount+0x89/0xd0
 [<ffffffff815feae2>] system_call_fastpath+0x16/0x1b

This patch adds a recovery function of xattr node pages.
Reported-by: NTom Li <biergaizi@members.fsf.org>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If a node page is trucated, we'd better drop the page in the node_inode's page
cache for better memory footprint.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds NODE_MAPPING which is similar as META_MAPPING introduced by
Gu Zheng.

Cc: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Introduce help function META_MAPPING() to get the cache meta blocks'
address space.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Fixed a variety of trivial checkpatch warnings.  The only delta should
be some minor formatting on log strings that were split / too long.
Signed-off-by: NChris Fries <cfries@motorola.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When considering a bunch of data writes with very frequent fsync calls, we
are able to think the following performance regression.

N: Node IO, D: Data IO, IO scheduler: cfq

Issue    pending IOs
	 D1 D2 D3 D4
 D1         D2 D3 D4 N1
 D2            D3 D4 N1 N2
 N1            D3 D4 N2 D1
 --> N1 can be selected by cfq becase of the same priority of N and D.
     Then D3 and D4 would be delayed, resuling in performance degradation.

So, when processing the fsync call, it'd better give higher priority to data IOs
than node IOs by assigning WRITE and WRITE_SYNC respectively.
This patch improves the random wirte performance with frequent fsync calls by up
to 10%.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

The truncate_partial_nodes puts pages incorrectly in the following two cases.
Note that the value for argc 'depth' can only be 2 or 3.
Please see truncate_inode_blocks() and truncate_partial_nodes().

1) An err is occurred in the first 'for' loop
  When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't
  need to be put. There is no problem, however, when depth is 3, it doesn't put
  the pages correctly where pages[0] is valid and pages[1] is invalid.
  In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then
  'goto fail'.
  In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition
  because i = -1, so pages[0] cann't be put.

2) An err happened in the second 'for' loop
  Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1]
  with depth = 3. When an err is detected, we need 'goto fail' to put such
  the pages.
  When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't
  meet the condition because i = -1, so pages[0] cann't be put.
  When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can
  only put pages[0], pages[1] also cann't be put.

Note that 'depth' has been changed before first 'goto fail' (ref to statemnt
depth = i + 1), so passing this modified 'depth' to the tracepoint,
trace_f2fs_truncate_partial_nodes, is also incorrect.
Signed-off-by: NShifei Ge <shifei10.ge@samsung.com>
[Jaegeuk Kim: modify the description and fix one bug]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces F2FS_INODE that returns struct f2fs_inode * from the inode
page.
By using this macro, we can remove unnecessary casting codes like below.

   struct f2fs_inode *ri = &F2FS_NODE(inode_page)->i;
-> struct f2fs_inode *ri = F2FS_INODE(inode_page);
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Update several comments:
1. use f2fs_{un}lock_op install of mutex_{un}lock_op.
2. update comment of get_data_block().
3. update description of node offset.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

When using the f2fs_io_info in the low level, we still need to merge the
rw and rw_flag, so use the rw to hold all the io flags directly,
and remove the rw_flag field.

ps.It is based on the previous patch:
f2fs: move all the bio initialization into __bio_alloc
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch introduces f2fs_io_info to mitigate the complex parameter list.

struct f2fs_io_info {
	enum page_type type;		/* contains DATA/NODE/META/META_FLUSH */
	int rw;				/* contains R/RS/W/WS */
	int rw_flag;			/* contains REQ_META/REQ_PRIO */
}

1. f2fs_write_data_pages
 - DATA
 - WRITE_SYNC is set when wbc->WB_SYNC_ALL.

2. sync_node_pages
 - NODE
 - WRITE_SYNC all the time

3. sync_meta_pages
 - META
 - WRITE_SYNC all the time
 - REQ_META | REQ_PRIO all the time

 ** f2fs_submit_merged_bio() handles META_FLUSH.

4. ra_nat_pages, ra_sit_pages, ra_sum_pages
 - META
 - READ_SYNC

Cc: Fan Li <fanofcode.li@samsung.com>
Cc: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

This patch adds unlikely() macro into the most of codes.
The basic rule is to add that when:
- checking unusual errors,
- checking page mappings,
- and the other unlikely conditions.

Change log from v1:
 - Don't add unlikely for the NULL test and error test: advised by Andi Kleen.

Cc: Chao Yu <chao2.yu@samsung.com>
Cc: Andi Kleen <andi@firstfloor.org>
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

As we know, some of our branch condition will rarely be true. So we could add
'unlikely' to let compiler optimize these code, by this way we could drop
unneeded 'jump' assemble code to improve performance.

change log:
 o add *unlikely* as many as possible across the whole source files at once
   suggested by Jaegeuk Kim.
Suggested-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Use inner macro GFP_F2FS_ZERO to instead of GFP_NOFS | __GFP_ZERO for
simplification of code.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

If cp has no CP_UMOUNT_FLAG, we will read all pages in whole node segment
one by one, it makes low performance. So let's merge contiguous pages and
readahead for better performance.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: adjust the new bio operations]
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>