This adds fbdev/con support for tiled monitors, so that we
only set a mode on the correct half of the monitor, or
span the two halves if needed.

v2: remove unneeded ERROR, fix | vs ||
Signed-off-by: NDave Airlie <airlied@redhat.com>

This takes the tiling info from the connector and
exposes it to userspace, as a blob object in a
connector property.

The contents of the blob is ABI.

v2: add property + function documentation.

v3: move property setup from previous patch.
add boilerplate + fix long line (Daniel)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This creates a tile group from DisplayID block, and
stores the pieces of parsed info from the DisplayID block
into the connector.

v2: add missing signoff, add new connector bits to docs.

v3: remove some debugging.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Logical ports are never going to have EDID changes,
they are used for the internal ports on MST monitors.

We cache the EDIDs from these to save time at MST probe.

v2: drop misplace tile property line, meant for other patch.
Signed-off-by: NDave Airlie <airlied@redhat.com>

A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.

DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.

v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.

v3: fix missing unlock.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

These are just taken from the DisplayID v1.3 spec, and the
DDC spec.

v2: use __packed (Jani)
Signed-off-by: NDave Airlie <airlied@redhat.com>

When we unplug a dp mst branch we unreference the entire tree from
the root towards the leaves. Which is ok, since that's the way the
pointers and so also the refcounts go.

But when we drop the reference we must make sure that we remove the
branches/ports from the lists/pointers before dropping the reference.
Otherwise the get_validated functions will still return it instead
of returning NULL (which indicates a potentially on-going unplug).

The mst branch destroy gets this right for ports: First it deletes
the port from the ports list, then it unrefs. But the ports destroy
function gets it wrong: First it unrefs, then it drops the ref. Which
means a zombie mst branch can still be validate with get_validated_mstb_ref
when it shouldn't.

Fix this.

This should address a backtrace Dave dug out somewhere on unplug:

 [<ffffffffa00cc262>] drm_dp_mst_get_validated_mstb_ref_locked+0x92/0xa0 [drm_kms_helper]
 [<ffffffffa00cc211>] drm_dp_mst_get_validated_mstb_ref_locked+0x41/0xa0 [drm_kms_helper]
 [<ffffffffa00cc2aa>] drm_dp_get_validated_mstb_ref+0x3a/0x60 [drm_kms_helper]
 [<ffffffffa00cc2fb>] drm_dp_payload_send_msg.isra.14+0x2b/0x100 [drm_kms_helper]
 [<ffffffffa00cc547>] drm_dp_update_payload_part1+0x177/0x360 [drm_kms_helper]
 [<ffffffffa015c52e>] intel_mst_disable_dp+0x3e/0x80 [i915]
 [<ffffffffa013d60b>] haswell_crtc_disable+0x1cb/0x340 [i915]
 [<ffffffffa0136739>] intel_crtc_control+0x49/0x100 [i915]
 [<ffffffffa0136857>] intel_crtc_update_dpms+0x67/0x80 [i915]
 [<ffffffffa013fa59>] intel_connector_dpms+0x59/0x70 [i915]
 [<ffffffffa015c752>] intel_dp_destroy_mst_connector+0x32/0xc0 [i915]
 [<ffffffffa00cb44b>] drm_dp_destroy_port+0x6b/0xa0 [drm_kms_helper]
 [<ffffffffa00cb588>] drm_dp_destroy_mst_branch_device+0x108/0x130 [drm_kms_helper]
 [<ffffffffa00cb3cd>] drm_dp_port_teardown_pdt+0x3d/0x50 [drm_kms_helper]
 [<ffffffffa00cdb79>] drm_dp_mst_handle_up_req+0x499/0x540 [drm_kms_helper]
 [<ffffffff810d9ead>] ? trace_hardirqs_on_caller+0x15d/0x200 [<ffffffffa00cdc73>]
 drm_dp_mst_hpd_irq+0x53/0xa00 [drm_kms_helper] [<ffffffffa00c7dfb>]
 ? drm_dp_dpcd_read+0x1b/0x20 [drm_kms_helper] [<ffffffffa0153ed8>]
 ? intel_dp_dpcd_read_wake+0x38/0x70 [i915] [<ffffffffa015a225>]
 intel_dp_check_mst_status+0xb5/0x250 [i915] [<ffffffffa015ac71>]
 intel_dp_hpd_pulse+0x181/0x210 [i915] [<ffffffffa01104f6>]
 i915_digport_work_func+0x96/0x120 [i915]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

On MST systems the monitors don't appear when we set the fb up,
but plymouth opens the drm device and holds it open while they
come up, when plymouth finishes and lastclose gets called we
don't do the delayed fb probe, so the monitor never appears on the
console.

Fix this by moving the delayed checking into the mode restore.

v2: Daniel suggested that ->delayed_hotplug is set under
the mode_config mutex, so we should check it under that as
well, while we are in the area.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

At least on two MST devices I've tested with, when
they are link training downstream, they are totally
unable to handle aux ch msgs, so they defer like nuts.
I tried 16, it wasn't enough, 32 seems better.

This fixes one Dell 4k monitor and one of the
MST hubs.

v1.1: fixup comment (Tom).
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge rockchip GPU support.

This has a branch in common with the iommu tree, hopefully the
process works.

* 'drm_iommu_v15' of https://github.com/markyzq/kernel-drm-rockchip:
  dt-bindings: video: Add documentation for rockchip vop
  dt-bindings: video: Add for rockchip display subsytem
  drm: rockchip: Add basic drm driver
  dt-bindings: iommu: Add documentation for rockchip iommu
  iommu/rockchip: rk3288 iommu driver

As discussed on irc, I'm sending a pull request with one important change:

- Disable support for 32-bit user processes. This is done due to AMD's decision
  to remove support for 32-bit user processes on Linux for its HSA stack.

* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Disable support for 32-bit user processes

Linux 3.18

Backmerge Linus tree into -next as we had conflicts in i915/radeon/nouveau,
and everyone was solving them individually.

* tag 'v3.18': (57 commits)
  Linux 3.18
  watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  uapi: fix to export linux/vm_sockets.h
  i2c: cadence: Set the hardware time-out register to maximum value
  i2c: davinci: generate STP always when NACK is received
  ahci: disable MSI on SAMSUNG 0xa800 SSD
  context_tracking: Restore previous state in schedule_user
  slab: fix nodeid bounds check for non-contiguous node IDs
  lib/genalloc.c: export devm_gen_pool_create() for modules
  mm: fix anon_vma_clone() error treatment
  mm: fix swapoff hang after page migration and fork
  fat: fix oops on corrupted vfat fs
  ipc/sem.c: fully initialize sem_array before making it visible
  drivers/input/evdev.c: don't kfree() a vmalloc address
  cxgb4: Fill in supported link mode for SFP modules
  xen-netfront: Remove BUGs on paged skb data which crosses a page boundary
  mm/vmpressure.c: fix race in vmpressure_work_fn()
  mm: frontswap: invalidate expired data on a dup-store failure
  mm: do not overwrite reserved pages counter at show_mem()
  drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6
  ...

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/nouveau/nouveau_drm.c
	drivers/gpu/drm/radeon/radeon_cs.c

Pull libata fixes from Tejun Heo:
 "Three libata fixes for v3.18.  Nothing too interesting.  PCI ID ID and
  quirk additions to ahci and an error handling path fix in sata_fsl"

* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: disable MSI on SAMSUNG 0xa800 SSD
  sata_fsl: fix error handling of irq_of_parse_and_map
  AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller

Pull watchdog fix from Wim Van Sebroeck:
 "Fix the watchdog mask bit offset for Exynos7"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7

Pull i2c fixes from Wolfram Sang:
 "Here are two more driver bugfixes for I2C which would be good to have"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Set the hardware time-out register to maximum value
  i2c: davinci: generate STP always when NACK is received

This patch checks if the process that opens the /dev/kfd device is 32-bit
process. If so, it returns -EPERM and prints a warning message in dmesg.

This is done to prevent 32-bit user processes from using amdkfd, and hence, HSA
features.

AMD's HSA userspace stack will also support only 64-bit processes on Linux.
Reviewed-by: NAlexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

The watchdog mask bit offset listed for Exynos7 is incorrect.
Fix this.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com
Reviewd-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Pull x86 fixes from Thomas Gleixner:
 "Two final fixlets for 3.18:
   - Prevent microcode reload wreckage on 32bit
   - Unbreak cross compilation"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Limit the microcode reloading to 64-bit for now
  x86: Use $(OBJDUMP) instead of plain objdump

Pull sound fixlet from Takashi Iwai:
 "Just one commit for adding a copule of HD-audio quirk entries"

* tag 'sound-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Add headset Mic support for new Dell machine

Pull drm intel fixes from Dave Airlie:
 "Two intel stable fixes, that should be it from me for this round"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Unlock panel even when LVDS is disabled
  drm/i915: More cautious with pch fifo underruns

Pull ACPI backlight fix from Rafael Wysocki:
 "This is a simple fix for an ACPI backlight regression introduced by a
  recent commit that overlooked a corner case which should have been
  taken into account"

* tag 'pm+acpi-3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: update condition to check if device is in _DOD list

Silence some pch fifo underrun reports and panel locking backtraces,
both cc: stable.

* tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Unlock panel even when LVDS is disabled
  drm/i915: More cautious with pch fifo underruns

Merge tag 'drm-intel-next-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel into drm-next

Fixes for 3.20. I did stick the gen3/4 reset work from Ville in because we
have an awful lot of gen4 mesa hangs, and with this reset should also work
on vintage i965g/gm (we already have reset for g4x/gen4.5). So should help
to appease users suffering from these hangs. Otherwise all over.

This is the last 3.20 pull from me, from here on Jani will take over. By Ville Syrjälä (8) and others
* tag 'drm-intel-next-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Reject modeset when the same digital port is used more than once
  drm/i915: mask RPS IRQs properly when disabling RPS
  drm/i915: Tune down spurious CRC interrupt warning
  drm/i915: Fix context object leak for legacy contexts
  drm/i915/skl: Update in Gen9 multi-engine forcewake range
  drm/i915/eDP: When enabling panel VDD cancel pending disable worker
  drm/i915: Handle runtime pm in the CRC setup code
  drm/i915: Disable crtcs gracefully before GPU reset on gen3/4
  drm/i915: Grab modeset locks for GPU rest on pre-ctg
  drm/i915: Implement GPU reset for g33
  drm/i915: Implement GPU reset for 915/945
  drm/i915: Restore the display config after a GPU reset on gen4
  drm/i915: Fix gen4 GPU reset
  drm/i915: Stop gathering error states for CS error interrupts
  drm/i915: Disallow pin ioctl completely for kms drivers
  drm/i915: Only warn the first time we attempt to mmio whilst suspended
  drm/i915/chv: Enable AVI, SPD and HDMI infoframes for CHV.
  drm/i915: Don't clobber crtc->new_config when nothing changes

Just three more fixes for 3.19.
This is the last request until -rc1. I will have our QA team run a full
HSA stack test on 3.19-rc1 and if we find problems, I will send a fixes pull
request.

* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Set *buffer_ptr to NULL in case of error
  amdkfd: use atomic allocations within srcu callbacks
  amdkfd: use sizeof(long) granularity for the pasid bitmask

- More cursor and hotspot handling fixes
- Fix some typos in the new smc fan control code and enable on CI
- VM and CS cleanups

* 'drm-next-3.19-wip' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: enable smc fan control on CI
  drm/radeon: use pointers instead of indexes for CS chunks
  drm/radeon: remove duplicates check
  drm/ttm: optionally move duplicates to a separate list
  drm/radeon: check the right ring in radeon_evict_flags()
  drm/radeon: fix copy paste typos in fan control for si/ci
  drm/radeon: Hide cursor on CRTCs used by fbdev (v2)
  drm/radeon: add spinlock for BO_VA status protection (v2)
  drm/radeon: fence PT updates as shared
  drm/radeon: rename radeon_cs_reloc to radeon_bo_list
  drm/radeon: drop the handle from radeon_cs_reloc
  drm/radeon drop gobj from radeon_cs_reloc
  drm/radeon: fix typo in new fan control registers for SI/CI
  drm/radeon: sync all BOs involved in a CS
  drm/radeon: Move hotspot handling out of radeon_set_cursor
  drm/radeon: Re-show the cursor after a modeset

Pull media fixes from Mauro Carvalho Chehab:
 "A core fix and some driver fixes:
   - regression fix in Remote Controller core affecting RC6 protocol
     handling
   - fix video buffer handling in cx23885
   - race fix in solo6x10
   - fix image selection in smiapp
   - fix reported payload size on s2255drv
   - two updates for MAINTAINERS file"

* tag 'media/v3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] rc-core: fix toggle handling in the rc6 decoder
  MAINTAINERS: Update mchehab's addresses
  [media] cx23885: use sg = sg_next(sg) instead of sg++
  [media] s2255drv: fix payload size for JPG, MJPEG
  [media] Update MAINTAINERS for solo6x10
  [media] solo6x10: fix a race in IRQ handler
  [media] smiapp: Only some selection targets are settable

A typo "header=y" was introduced by commit 7071cf7f ("uapi: add
missing network related headers to kbuild").
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cadence I2C controller has bug wherein it generates invalid read transactions
after timeout in master receiver mode. This driver does not use the HW
timeout and this interrupt is disabled but the feature itself cannot be
disabled. Hence, this patch writes the maximum value (0xFF) to this register.
This is one of the workarounds to this bug and it will not avoid the issue
completely but reduces the chances of error.
Signed-off-by: NVishnu Motghare <vishnum@xilinx.com>
Signed-off-by: NHarini Katakam <harinik@xilinx.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

According to I2C specification the NACK should be handled as follows:
"When SDA remains HIGH during this ninth clock pulse, this is defined as the Not
Acknowledge signal. The master can then generate either a STOP condition to
abort the transfer, or a repeated START condition to start a new transfer."
[I2C spec Rev. 6, 3.1.6: http://www.nxp.com/documents/user_manual/UM10204.pdf]

Currently the Davinci i2c driver interrupts the transfer on receipt of a
NACK but fails to send a STOP in some situations and so makes the bus
stuck until next I2C IP reset (idle/enable).

For example, the issue will happen during SMBus read transfer which
consists from two i2c messages write command/address and read data:

S Slave Address Wr A Command Code A Sr Slave Address Rd A D1..Dn A P
<--- write -----------------------> <--- read --------------------->

The I2C client device will send NACK if it can't recognize "Command Code"
and it's expected from I2C master to generate STP in this case.
But now, Davinci i2C driver will just exit with -EREMOTEIO and STP will
not be generated.

Hence, fix it by generating Stop condition (STP) always when NACK is received.

This patch fixes Davinci I2C in the same way it was done for OMAP I2C
commit cda2109a ("i2c: omap: query STP always when NACK is received").
Reviewed-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: NHein Tibosch <hein_tibosch@yahoo.es>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Just like 0x1600 which got blacklisted by 66a7cbc3 ("ahci: disable
MSI instead of NCQ on Samsung pci-e SSDs on macbooks"), 0xa800 chokes
on NCQ commands if MSI is enabled.  Disable MSI.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NDominik Mierzejewski <dominik@greysector.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=89171
Cc: stable@vger.kernel.org

In function acquire_packet_buffer() we may return -ENOMEM. In that case, we
should set the *buffer_ptr to NULL, so that calling functions which check the
*buffer_ptr value as a criteria for success, will know that
acquire_packet_buffer() failed.
Reviewed-by: NAlexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

It appears that some SCHEDULE_USER (asm for schedule_user) callers
in arch/x86/kernel/entry_64.S are called from RCU kernel context,
and schedule_user will return in RCU user context.  This causes RCU
warnings and possible failures.

This is intended to be a minimal fix suitable for 3.18.
Reported-and-tested-by: NDave Jones <davej@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This seems to work well on CI boards after fixing the
last few bugs noticed by Chernovsky Oleg.

On boards with a high default fan speed this should
reduce fan noise.  Manual fan control is not enabled
yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Nobody is interested at which index the chunk is. What's needed is
a pointer to the chunk. Remove unused chunk_id field as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Completely unnecessary since the ww_mutex used to reserve a buffer
can detect double reservations from the same thread anyway.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds an optional list_head parameter to ttm_eu_reserve_buffers.
If specified duplicates in the execbuf list are no longer reported as errors,
but moved to this list instead.
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check the that ring we are using for copies is functional
rather than the GFX ring.  On newer asics we use the DMA
ring for bo moves.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pull i2c bugfixes from Wolfram Sang:
 "A few driver bugfixes for 3.18"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: omap: fix i207 errata handling
  i2c: designware: prevent early stop on TX FIFO empty
  i2c: omap: fix NACK and Arbitration Lost irq handling