Ok, this is hacky, and only works on little-endian machines with goo
unaligned handling.  And even then only with CONFIG_DEBUG_PAGEALLOC
disabled, since it can access up to 7 bytes after the pathname.

But it runs like a bat out of hell.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

EDAC detection no longer crashes multi-node systems, so don't
conflict on it with NumaChip.
Signed-off-by: NDaniel J Blueman <daniel@numascale-asia.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1327473349-28395-1-git-send-email-daniel@numascale-asia.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Move the ZONE_DMA kconfig symbol under a menu item instead
of having it listed before everything else in
"make {xconfig | gconfig | nconfig | menuconfig}".

This drops the first line of the top-level kernel config menu
(in 3.2) below and moves it under "Processor type and features".

          [*] DMA memory allocation support
              General setup  --->
          [*] Enable loadable module support  --->
          [*] Enable the block layer  --->
              Processor type and features  --->
              Power management and ACPI options  --->
              Bus options (PCI etc.)  --->
              Executable file formats / Emulations  --->
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-mm@kvack.org <linux-mm@kvack.org>
Link: http://lkml.kernel.org/r/4F14811E.6090107@xenotime.netSigned-off-by: NIngo Molnar <mingo@elte.hu>
Cc: David Rientjes <rientjes@google.com>

Move CMPXCHG_DOUBLE and rename it to HAVE_CMPXCHG_DOUBLE so architectures
can simply select the option if it is supported.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move CMPXCHG_LOCAL and rename it to HAVE_CMPXCHG_LOCAL so architectures
can simply select the option if it is supported.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

While implementing cmpxchg_double() on s390 I realized that we don't set
CONFIG_CMPXCHG_LOCAL despite the fact that we have support for it.

However setting that option will increase the size of struct page by
eight bytes on 64 bit, which we certainly do not want.  Also, it doesn't
make sense that a present cpu feature should increase the size of struct
page.

Besides that it looks like the dependency to CMPXCHG_LOCAL is wrong and
that it should depend on CMPXCHG_DOUBLE instead.

This patch:

If an architecture supports CMPXCHG_LOCAL this shouldn't result
automatically in larger struct pages if the SLUB allocator is used.
Instead introduce a new config option "HAVE_ALIGNED_STRUCT_PAGE" which
can be selected if a double word aligned struct page is required.  Also
update x86 Kconfig so that it should work as before.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Randomization of PIE load address is hard coded in binfmt_elf.c for X86
and ARM.  Create a new Kconfig variable
(CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE) for this and use it instead.  Thus
architecture specific policy is pushed out of the generic binfmt_elf.c and
into the architecture Kconfig files.

X86 and ARM Kconfigs are modified to select the new variable so there is
no change in behavior.  A follow on patch will select it for MIPS too.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Seems Kconfig SELECT isn't selecting things hierarchically when
selected.

config APB_TIMER
       def_bool y if X86_INTEL_MID
       prompt "Intel MID APB Timer Support" if X86_INTEL_MID
       select DW_APB_TIMER
       depends on X86_INTEL_MID && SFI

when we select APB_TIMER doesn't select DW_APB_TIMER so do it by
hand.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-kpnaimplltk6d1lolusqj3ae@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

This sets all up the other bits that need to be INTEL_MID
specific rather than Moorestown specific.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20111217174318.7207.91543.stgit@bob.linux.org.ukSigned-off-by: NIngo Molnar <mingo@elte.hu>

The APB timer requires SFI, SCU and MID support
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20111217215719.3743.93550.stgit@bob.linux.org.ukSigned-off-by: NIngo Molnar <mingo@elte.hu>

Doh.. pass the brown paper bags - preferably filled with mince
pies..

This fixes occasional build failures.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-r0oc1knlvzuqr69artaeq8s8@git.kernel.org
[ extended the changelog a bit ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There is currently a large divide between kernel development and the
development of EFI boot loaders. The idea behind this patch is to give
the kernel developers full control over the EFI boot process. As
H. Peter Anvin put it,

"The 'kernel carries its own stub' approach been very successful in
dealing with BIOS, and would make a lot of sense to me for EFI as
well."

This patch introduces an EFI boot stub that allows an x86 bzImage to
be loaded and executed by EFI firmware. The bzImage appears to the
firmware as an EFI application. Luckily there are enough free bits
within the bzImage header so that it can masquerade as an EFI
application, thereby coercing the EFI firmware into loading it and
jumping to its entry point. The beauty of this masquerading approach
is that both BIOS and EFI boot loaders can still load and run the same
bzImage, thereby allowing a single kernel image to work in any boot
environment.

The EFI boot stub supports multiple initrds, but they must exist on
the same partition as the bzImage. Command-line arguments for the
kernel can be appended after the bzImage name when run from the EFI
shell, e.g.

Shell> bzImage console=ttyS0 root=/dev/sdb initrd=initrd.img

v7:
 - Fix checkpatch warnings.

v6:

 - Try to allocate initrd memory just below hdr->inird_addr_max.

v5:

 - load_options_size is UTF-16, which needs dividing by 2 to convert
   to the corresponding ASCII size.

v4:

 - Don't read more than image->load_options_size

v3:

 - Fix following warnings when compiling CONFIG_EFI_STUB=n

   arch/x86/boot/tools/build.c: In function ‘main’:
   arch/x86/boot/tools/build.c:138:24: warning: unused variable ‘pe_header’
   arch/x86/boot/tools/build.c:138:15: warning: unused variable ‘file_sz’

 - As reported by Matthew Garrett, some Apple machines have GOPs that
   don't have hardware attached. We need to weed these out by
   searching for ones that handle the PCIIO protocol.

 - Don't allocate memory if no initrds are on cmdline
 - Don't trust image->load_options_size

Maarten Lankhorst noted:
 - Don't strip first argument when booted from efibootmgr
 - Don't allocate too much memory for cmdline
 - Don't update cmdline_size, the kernel considers it read-only
 - Don't accept '\n' for initrd names

v2:

 - File alignment was too large, was 8192 should be 512. Reported by
   Maarten Lankhorst on LKML.
 - Added UGA support for graphics
 - Use VIDEO_TYPE_EFI instead of hard-coded number.
 - Move linelength assignment until after we've assigned depth
 - Dynamically fill out AddressOfEntryPoint in tools/build.c
 - Don't use magic number for GDT/TSS stuff. Requested by Andi Kleen
 - The bzImage may need to be relocated as it may have been loaded at
   a high address address by the firmware. This was required to get my
   macbook booting because the firmware loaded it at 0x7cxxxxxx, which
   triggers this error in decompress_kernel(),

	if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
		error("Destination address too large");

Cc: Mike Waychison <mikew@google.com>
Cc: Matthew Garrett <mjg@redhat.com>
Tested-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1321383097.2657.9.camel@mfleming-mobl1.ger.corp.intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Now all ARCH_POPULATES_NODE_MAP archs select HAVE_MEBLOCK_NODE_MAP -
there's no user of early_node_map[] left.  Kill early_node_map[] and
replace ARCH_POPULATES_NODE_MAP with HAVE_MEMBLOCK_NODE_MAP.  Also,
relocate for_each_mem_pfn_range() and helper from mm.h to memblock.h
as page_alloc.c would no longer host an alternative implementation.

This change is ultimately one to one mapping and shouldn't cause any
observable difference; however, after the recent changes, there are
some functions which now would fit memblock.c better than page_alloc.c
and dependency on HAVE_MEMBLOCK_NODE_MAP instead of HAVE_MEMBLOCK
doesn't make much sense on some of them.  Further cleanups for
functions inside HAVE_MEMBLOCK_NODE_MAP in mm.h would be nice.

-v2: Fix compile bug introduced by mis-spelling
 CONFIG_HAVE_MEMBLOCK_NODE_MAP to CONFIG_MEMBLOCK_HAVE_NODE_MAP in
 mmzone.h.  Reported by Stephen Rothwell.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>

If we select a symbol it should have a type declared first
otherwise in some situations the config tools get upset. They
are currently perhaps a bit too resilient which is why this
wasn't noticed initially.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20111206132811.4041.32549.stgit@bob.linux.org.ukSigned-off-by: NIngo Molnar <mingo@elte.hu>

We currently fail to build on CONFIG_X86_INTEL_MID=y and
CONFIG_X86_MRST unset.

We could build all the bits to make generic MID work if you
picked MID platform alone but that's really silly. Instead use
select and two variables.

This looks a bit daft right now but once we add a Medfield
selection it'll start to look a good deal more sensible.
Reported-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20111205231433.28811.51297.stgit@bob.linux.org.ukSigned-off-by: NIngo Molnar <mingo@elte.hu>

CONFIG_X86_CYCLONE_TIMER depends on CONFIG_X86_32_NON_STANDARD,
which forces drivers/clocksource/cyclone.c to be compiled. The
file doesn't do anything unless enabled by
arch/x86/kernel/apic/summit_32.c

Make CONFIG_X86_CYCLONE_TIMER depend by X86_SUMMIT instead, to
avoid unnecessary code in other non-standard systems.
Signed-off-by: NAlessandro Rubini <rubini@gnudd.com>
Cc: john stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20111028224842.GA7582@mail.gnudd.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Adds support for Numascale NumaChip large-SMP systems. It is
needed to enable the booting of more than ~168 cores.

v2:
 - [Steffen] enumerate only accessible northbridges
 - [Daniel] rediffed and validated against 3.1-rc10

v3:
 - [Daniel] use x86_init core numbering override
 - [Daniel] cleanups as per feedback

v4:
 - [Daniel] use updated x86_cpuinit override

v5:
 - drop disabling interrupts locally, as ISR write is atomic; drop delay
 - added read-mostly annotations where appropriate
 - require CONFIG_SMP, so drop conditional path

Workload tested on 96 cores/16 sockets.
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Signed-off-by: NDaniel J Blueman <daniel@numascale-asia.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Link: http://lkml.kernel.org/r/1323101246-2400-1-git-send-email-daniel@numascale-asia.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

This follows on from the patch applied in 3.2rc1 which creates
an INTEL_MID configuration. We can now add the entry for
Medfield specific code. After this is merged the final patch
will be submitted which moves the rest of the device Kconfig
dependancies to MRST/MEDFIELD/INTEL_MID as appropriate.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

define GENERIC_IOMAP in a central location
instead of all architectures. This will be helpful
for the follow-up patch which makes it select
other configs. Code is also a bit shorter this way.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

There's no Kconfig symbol APM_MODULE, so the check for it will always
fail. There's no need to append _MODULE to tristate symbols anyhow,
because the config tools will do the right thing automagically.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Sparseirq got introduced in v2.6.28 and Thomas did a huge cleanup
around v2.6.38 that eliminated basically all disadvantages
of it.

So we can remove non-sparseirq support now and simplify
our IRQ degrees of freedom a bit.
Suggested-and-acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/4E95E21D.6090200@oracle.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This new driver replaces the old PCEngines Alix 2/3 LED driver with a
new driver that controls the LEDs through the leds-gpio driver. The
old driver accessed GPIOs directly, which created a conflict and
prevented also loading the cs5535-gpio driver to read other GPIOs on
the Alix board. With this new driver, we hook into leds-gpio which in
turn uses GPIO to control the LEDs and therefore it's possible to
control both the LEDs and access onboard GPIOs

Driver is moved to platform/geode as requested by Grant and any other
geode initialisation modules should move here also

This driver is inspired by leds-net5501.c by Alessandro Zummo.

Ideally, leds-net5501.c should also be moved to platform/geode. 
Additionally the driver relies on parts of the patch: 7f131cf3 ("leds:
leds-alix2c - take port address from MSR) by Daniel Mack to perform
detection of the Alix board.

[akpm@linux-foundation.org: include module.h]
Signed-off-by: NEd Wildgoose <kernel@wildgooses.com>
Cc: git@wildgooses.com
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Reviewed-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent
with the other IOMMU options.

Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the
irq subsystem name.

And define the CONFIG_DMAR_TABLE for the common ACPI DMAR
routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: yinghai@kernel.org
Cc: youquan.song@intel.com
Cc: joerg.roedel@amd.com
Cc: tony.luck@intel.com
Cc: dwmw2@infradead.org
Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The automatic increase of the min_delta_ns of a clockevents device
should be done in the clockevents code as the minimum delay is an
attribute of the clockevents device.

In addition not all architectures want the automatic adjustment, on a
massively virtualized system it can happen that the programming of a
clock event fails several times in a row because the virtual cpu has
been rescheduled quickly enough. In that case the minimum delay will
erroneously be increased with no way back. The new config symbol
GENERIC_CLOCKEVENTS_MIN_ADJUST is used to enable the automatic
adjustment. The config option is selected only for x86.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Cc: john stultz <johnstul@us.ibm.com>
Link: http://lkml.kernel.org/r/20110823133142.494157493@de.ibm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

cmpxchg() is widely used by lockless code, including NMI-safe lockless
code.  But on some architectures, the cmpxchg() implementation is not
NMI-safe, on these architectures the lockless code may need a
spin_trylock_irqsave() based implementation.

This patch adds a Kconfig option: ARCH_HAVE_NMI_SAFE_CMPXCHG, so that
NMI-safe lockless code can depend on it or provide different
implementation according to it.

On many architectures, cmpxchg is only NMI-safe for several specific
operand sizes. So, ARCH_HAVE_NMI_SAFE_CMPXCHG define in this patch
only guarantees cmpxchg is NMI-safe for sizeof(unsigned long).
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Acked-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Acked-by: NRichard Henderson <rth@twiddle.net>
CC: Mikael Starvik <starvik@axis.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: Tony Luck <tony.luck@intel.com>
CC: Hirokazu Takata <takata@linux-m32r.org>
CC: Geert Uytterhoeven <geert@linux-m68k.org>
CC: Michal Simek <monstr@monstr.eu>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
CC: Kyle McMartin <kyle@mcmartin.ca>
CC: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: Chen Liqin <liqin.chen@sunplusct.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Ingo Molnar <mingo@redhat.com>
CC: Chris Zankel <chris@zankel.net>
Signed-off-by: NLen Brown <len.brown@intel.com>

Architectural inlines to get random ints and longs using the RDRAND
instruction.

Intel has introduced a new RDRAND instruction, a Digital Random Number
Generator (DRNG), which is functionally an high bandwidth entropy
source, cryptographic whitener, and integrity monitor all built into
hardware.  This enables RDRAND to be used directly, bypassing the
kernel random number pool.

For technical documentation, see:

http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/

In this patch, this is *only* used for the nonblocking random number
pool.  RDRAND is a nonblocking source, similar to our /dev/urandom,
and is therefore not a direct replacement for /dev/random.  The
architectural hooks presented in the previous patch only feed the
kernel internal users, which only use the nonblocking pool, and so
this is not a problem.

Since this instruction is available in userspace, there is no reason
to have a /dev/hw_rng device driver for the purpose of feeding rngd.
This is especially so since RDRAND is a nonblocking source, and needs
additional whitening and reduction (see the above technical
documentation for details) in order to be of "pure entropy source"
quality.

The CONFIG_EXPERT compile-time option can be used to disable this use
of RDRAND.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Originally-by: NFenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>

As reported by Randy Dunlap, CONFIG_POWER_SUPPLY=m caused a
compile error:

  arch/x86/built-in.o: In function `battery_status_changed':
   olpc-xo15-sci.c:(.text+0x3acdd): undefined reference to `power_supply_get_by_name'
   olpc-xo15-sci.c:(.text+0x3ad04): undefined reference to `power_supply_changed'

The SCI drivers, as bool, require POWER_SUPPLY to be builtin.
Use select to make that a hard requirement and avoid this build
failure.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Direct access is needed in mmconf mode too. There are two reasons:
1. we need it to access first 256 bytes. We have bug before that
   using mmconf to access pci config space hangs system (when
   resizing BARs), so we use type1 config for legacy config space.
2. when doing mmconfg bar checking, we need access ACPI _CRS,
   which might access PCI config space.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The machinery for __ARCH_HAS_CLOCKSOURCE_DATA assumed a file in
asm-generic would be the default for architectures without their own
file in asm/, but that is not how it works.

Replace it with a Kconfig option instead.

Link: http://lkml.kernel.org/r/4E288AA6.7090804@zytor.comSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Luck <tony.luck@intel.com>

We need to carve up the configuration between:

 - MID general
 - Moorestown specific
 - Medfield specific
 - Future devices

As a base point create an INTEL_MID configuration property. We
make the existing MRST configuration a sub-option. This means
that the rest of the kernel config can still use X86_MRST checks
without anything going backwards.

After this is merged future patches will tidy up which devices
are MID and which are X86_MRST, as well as add options for
Medfield.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20110712164859.7642.84136.stgit@bob.linux.org.ukSigned-off-by: NIngo Molnar <mingo@elte.hu>

From 6839454ae63f1eb21e515c10229ca95c22955fec Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:17 +0200

Make ARCH_DISCARD_MEMBLOCK a config option so that it can be handled
together with other MEMBLOCK options.
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094603.GH3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

From 5732e1247898d67cbf837585150fe9f68974671d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 14 Jul 2011 11:22:16 +0200

Convert x86 to HAVE_MEMBLOCK_NODE_MAP.  The only difference in memory
handling is that allocations can't no longer cross node boundaries
whether they're node affine or not, which shouldn't matter at all.

This conversion will enable further simplification of boot memory
handling.

-v2: Fix build failure on !NUMA configurations discovered by hpa.
Signed-off-by: NTejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/20110714094423.GG3455@htj.dyndns.org
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

This patch makes update_rq_clock() aware of steal time.
The mechanism of operation is not different from irq_time,
and follows the same principles. This lives in a CONFIG
option itself, and can be compiled out independently of
the rest of steal time reporting. The effect of disabling it
is that the scheduler will still report steal time (that cannot be
disabled), but won't use this information for cpu power adjustments.

Everytime update_rq_clock_task() is invoked, we query information
about how much time was stolen since last call, and feed it into
sched_rt_avg_update().

Although steal time reporting in account_process_tick() keeps
track of the last time we read the steal clock, in prev_steal_time,
this patch do it independently using another field,
prev_steal_time_rq. This is because otherwise, information about time
accounted in update_process_tick() would never reach us in update_rq_clock().
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Tested-by: NEric B Munson <emunson@mgebm.net>
CC: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Commit 2706a0bf ("x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit
too") enabled AMD NUMA for 32bit too.  Unfortunately, SPARSEMEM
on 32bit had rather coarse (512MiB) addr->node mapping
granularity due to lack of space in page->flags.  This led to
boot failure on certain AMD NUMA machines which had 128MiB
alignment on nodes.

Patches to properly detect this condition and reject NUMA
configuration are posted[1] but deemed too pervasive for merge
at this point (-rc6).  Disable AMD NUMA for 32bit for now and
re-enable once the detection logic is merged.

[1] http://thread.gmane.org/gmane.linux.kernel/1161279/focus=1162583Reported-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Conny Seidel <conny.seidel@amd.com>
Link: http://lkml.kernel.org/r/20110711083432.GC943@htj.dyndns.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMichael Witten <mfwitten@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add a driver for the ACPI-based EC event interface found on the
OLPC XO-1.5 laptop. This enables notification of battery/AC power events,
and enables various devices to be used as wakeup sources through regular
ACPI mechanisms.

This driver can't be built as a module, because some drivers need to know
at boot-time if SCI-based functionality is available via
olpc_ec_wakeup_available().
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Link: http://lkml.kernel.org/r/1309019658-1712-12-git-send-email-dsd@laptop.orgAcked-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Add a driver to configure the XO-1 RTC via CS5536 MSRs, to be used as a
system wakeup source via olpc-xo1-pm.

Device detection is based on finding the relevant device tree node.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Link: http://lkml.kernel.org/r/1309019658-1712-11-git-send-email-dsd@laptop.orgAcked-by: NAndres Salomon <dilinger@queued.net>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Reviewed-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

EC events indicate change in AC power connectivity, battery state of
charge, battery error, battery presence, etc. Send notifications to
the power supply subsystem when changes are detected.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Link: http://lkml.kernel.org/r/1309019658-1712-10-git-send-email-dsd@laptop.orgAcked-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>