Type cast from void to struct find_gid_index_context is not needed.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce and user helper functions to initialize work for address
resolved and route resolved event that avoid code duplication at few
places.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Avoid setting path record type twice for RoCE.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Current code checks for NULL ndev twice where 2nd check is always
invalid given the fact that during route resolving stage, device address
must be bound to netdevice interface.

This patch simplifies such check.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As the function name suggests cma_resolve_iboe_route() resolves RoCE
route. However, its default GID type is IB_GID_TYPE_IB and not
IB_GID_TYPE_ROCE, even though both are mapped to the same enum value.
Change default GID type to IB_GID_TYPE_ROCE.

cma_iboe_set_mgid() is updated to reflect the RoCEv2 GID check.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Reviewed-by: NNoa Osherovich <noaos@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In ib_umem structure npages holds original number of sg entries, while
nmap is number of DMA blocks returned by dma_map_sg.

Fixes: c5d76f13 ('IB/core: Add umem function to read data from user-space')
Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add debug prints to the error paths in the connection manager control
flows, to help debug connection management problems.
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In cm_req_handler error flows, sometimes cm_id_priv->timewait_info
isn't free'd.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NMukesh Kacker <mukesh.kacker@oracle.com>
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The code was using the src size when formatting the dst. They are almost
certainly the same value but it reads wrong.

Fixes: ce117ffa ("RDMA/cma: Export AF_IB statistics")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In case that the PathRecord is not valid (SM changed its network prefix)
ipoib will continue issue PathQuery requests with the same parameters
that are in its database, which are no longer valid anymore.

Now the driver in that case will re-initialize the record from a valid
place (the priv structure keeps the updated values), and a valid request
will be issued.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The ipoib path database is organized around DGIDs from the LLADDR, but the
SA is free to return a different GID when asked for path. This causes a
bug because the SA's modified DGID is copied into the database key, even
though it is no longer the correct lookup key, causing a memory leak and
other malfunctions.

Ensure the database key does not change after the SA query completes.

Demonstration of the bug is as  follows
ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it
creates new record in the DB with that gid as a key, and issues a new
request to the SM.
Now, the SM from some reason returns path-record with other SGID (for
example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local
subnet prefix) now ipoib will overwrite the current entry with the new
one, and if new request to the original GID arrives ipoib  will not find
it in the DB (was overwritten) and will create new record that in its
turn will also be overwritten by the response from the SM, and so on
till the driver eats all the device memory.
Signed-off-by: NErez Shitrit <erezsh@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove unused ibpd parameter from create_qp_rss() function.
Signed-off-by: NErez Alfasi <ereza@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ib_security_modify_qp and ib_security_pkey_access are core internal
function. So avoid exporting them.
ib_security_pkey_access is used only when secuirty hooks are enabled so
avoid defining it otherwise.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

RoCEv1 does not use the IPv6 stack to resolve the link local DGID since it
uses GID address. It forms the DMAC directly from the DGID.

The code became confused and also tried to use this bypass for RoCEv2
packets, however RoCEv2 always uses a IP address in the GID and must
always use ARP or neighbor discovery to get the DMAC address.

Now that rdma_addr_find_l2_eth_by_grh() supports resolving link local
address to find destination mac address, lets make use of it.
This aligns it to how the rest of the IPv6 stack resolves link local
destination IPv6 address.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NEli Cohen <eli@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When computing a UD reverse path (return AH) from a WC the code was not
doing a route lookup anchored in a specific netdevice. This caused several
bugs, including broken IPv6 link-local address support in RoCEv2. [1]

This fixes the lookup by determining the GID table entry that the HW
matched to the SGID for the WC and then using the netdevice from that
entry to perform the route and ND lookup for the 'DGID' to build a return
AH.

RoCE GID table management ensures that right upper netdevices of the
physical netdevices are added. Therefore init_ah_from_wc doesn't need to
perform such check.

Now that route lookup is done based on the netdevice of the GID entry,
simplify code to not have ifindex and vlan pointers.  As part of that,
refactor to have netdevice as input parameter.  This is already discussed
at [2].

Finally ib_init_ah_from_wc resolves dmac for unicast GID in similar way as
what ib_resolve_eth_dmac() does. So ib_resolve_eth_dmac is refactored to
split for unicast and non unicast GIDs, so that it can be reused by
ib_init_ah_from_wc.

While we are at refactoring ib_resolve_eth_dmac(), it is further
simplified

(a) to avoid hoplimit as optional parameter, as there is only one
    user who always queries hoplimit.
(b) for empty line.
(c) avoided zero initialization of ret.
(d) removed as exported symbol as only ib core uses it.

For IPv6, this is tested using simple rping test as below.
 rping -sv -a ::0
 rping -c -a fe80::268a:7ff:fe55:4661%ens2f1 -C 1 -v -d

[1] https://www.spinics.net/lists/linux-rdma/msg45690.html
[2] https://www.spinics.net/lists/linux-rdma/msg45710.htmlSigned-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Reported-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Found with scripts/coccinelle/misc/boolconv.cocci.
Signed-off-by: NAndrew F. Davis <afd@ti.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Smatch complains about this code:

    drivers/infiniband/hw/mlx4/qp.c:1827 _mlx4_set_path()
    error: buffer overflow 'dev->dev->caps.gid_table_len' 3 <= 255

The mlx4_ib_gid_index_to_real_index() does check that "port" is within
bounds, but we don't check the return value for errors.  It seems simple
enough to add a check for that.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The story is that Smatch marks skb->data as untrusted so it generates
a warning message here:

    drivers/infiniband/hw/cxgb4/cm.c:4100 process_work()
    error: buffer overflow 'work_handlers' 241 <= 255

In other places which handle this such as t4_uld_rx_handler() there is
some checking to make sure that the function pointer is not NULL.  I
have added bounds checking and a check for NULL here as well.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The pointer reg_workq is local to the source and does not need to be
in global scope, so make it static.

Cleans up sparse warning:
drivers/infiniband/hw/cxgb4/device.c:69:25: warning: symbol 'reg_workq'
was not declared. Should it be static?

Fixes: 1c8f1da5 ("iw_cxgb4: Fix possible circular dependency locking warning")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The debugfs file prints the difference between host timestamps as a
seconds/nanoseconds tuple, along with a 64-bit nanoseconds hardware
timestamp. The host time is read using getnstimeofday() which is
deprecated because of the y2038 overflow, and it suffers from time jumps
during settimeofday() and leap seconds.

Converting to ktime_get_ts64() would solve those two, but I'm going
a little further here by changing to ktime_get() and printing 64-bit
nanoseconds on both host and hw timestamps.  This simplifies the code
further and makes the output easier to understand.

The format of the debugfs file obviously changes here, but this should
only be read by humans and not scripts, so I assume it's fine.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

With gcc-4.1.2:

    drivers/infiniband/core/iwpm_util.c: In function ‘iwpm_send_mapinfo’:
    drivers/infiniband/core/iwpm_util.c:647: warning: ‘ret’ may be used uninitialized in this function

Indeed, if nl_client is not found in any of the scanned has buckets, ret
will be used uninitialized.

Preinitialize ret to -EINVAL to fix this.

Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If one port fails to initialize an error message should indicate the
reason and driver should continue serving the working port(s) and other
HCA(s).

Fixes: e4b2d068 ("IB/ipoib: Remove device when one port fails to init").
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The bnxt_qplib_disable_nq() call is redundant as it occurs
after 'goto fail' and hence it called twice. Remove it.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to have a duplication of the generic library, i.e.
hex2bin().

Replace the open coded variant.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A warning that I thought I had fixed before occasionally comes
back in rare randconfig builds (I found 7 instances in the last
100000 builds, originally it was much more frequent):

drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr':
drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  if (order <= mr_cache_max_order(dev)) {
     ^
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I've looked at all those findings again and noticed that they are all
with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns
an error unconditionally and we never initialize or use those variables.
This triggers a condition in gcc iff mr_umem_get() is partially but not
entirely inlined, which in turn depends on the exact combination of
optimization settings. This is a known problem with gcc, with no
easy solution in the compiler, so this adds another workaround that
should be more reliable than my previous attempt.

Returning an error from mlx5_ib_reg_user_mr() earlier means that we
can completely bypass the logic that caused the warning, the compiler
can now see that the variable is never accessed.

Fixes: 14ab8896 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

add_sd_cnt in info structure passed to i40iw_create_hmc_obj_type
must be 0 and since it is modified during the call, it must be
reset in the loop. This avoids unnecessarily reprogramming the
SDs multiple times with the same values.
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use sqsize instead of I40IW_CQP_SW_SQSIZE_2048 to initialize
cqp_requests elements in the for-loop as sqsize is used
to allocate memory for cqp_requests.
Signed-off-by: NChien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

pr_* is the preferred way to print messages, replace all
printk(KERN_WARN, ...) with pr_warn.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Fix ptr_ret.cocci warnings:
drivers/infiniband/core/uverbs_cmd.c:1156:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: NVasyl Gomonovych <gomonovych@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is a stale entry in nes_cm_tcp_context that has apparently
never been used in mainline linux.

I'm trying to kill off all users of timeval as part of the
y2038-safety work, so let's just remove this one.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is a stale entry in i40iw_cm_tcp_context that apparently
was copied from the 'nes' driver but never used in i40iw.
I'm trying to kill off all users of timeval as part of the
y2038-safety work, so let's just remove this one.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to re-calculate the number of pages since it is already
done in ib_umem_get.
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Acked-by: NAdit Ranadive <aditr@vmware.com>
Tested-by: NAdit Ranadive <aditr@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove leftover garbage (containing Kconfig dependencies for another
symbol?)
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Perhaps the function is better written without
the empty bail: label and without setting ret
and just using return.

Combining the int/bool conversion of any and the
direct returns makes the resulting code clearer.
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The variable all is being set but is never read after this
hence it can be removed from the for loop initialization.
Cleans up clang warning:

drivers/infiniband/hw/qib/qib_file_ops.c:640:7: warning: Value
stored to 'any' is never read
Tested-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This failure exists with qib:

ver_rc_compare_swap:
mismatch, sequence 2, expected 123456789abcdef, got 0

The request builder was using the incorrect inlines to
build the request header resulting in incorrect data
in the atomic header.

Fix by using the appropriate inlines to create the request.

Cc: <stable@vger.kernel.org> # 4.9.x+
Fixes: 261a4351 ("IB/qib,IB/hfi: Use core common header file")
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, if a port is queried that has an invalid
Maximum Transmission Unit, driver reports default MTU of 2048.
This in incorrect.

Use default value of 4096 if invalid.
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

ULPs do not understand OPA GIDs and will reject CM requests
if the sgid does not match the local_gid. In order to
fix this behavior we convert the OPA GID back to an IB GID.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

16B packets require that the path bits are masked with the LMC.
This mask is done correctly in all 16B header creation but was
left out for the RC Acknowledge.
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDon Hiatt <don.hiatt@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>