The current implementation precludes having receive context specific
packet type receive handlers.

Fix this by adding adding c99 const array for the existing handlers and
remove the current 72 bytes of pointers from devdata.

A new pointer in hfi1_ctxtdata will point to the const array.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Expose DEVX tree to be used by upper layers.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Return the matching device EQN for a given user vector number via the
DEVX interface.

Note:
EQs are owned by the kernel and shared by all user processes.
Basically, a user CQ can point to any EQ.
The kernel doesn't enforce any such limitation today either.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support to register a memory with the firmware via the DEVX
interface.

The driver translates a given user address to ib_umem then it will
register the physical addresses with the firmware and get a unique id
for this registration to be used for this virtual address.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Return a device UAR index for a given user index via the DEVX interface.

Security note:
The hardware protection mechanism works like this: Each device object that
is subject to UAR doorbells (QP/SQ/CQ) gets a UAR ID (called uar_page in
the device specification manual) upon its creation. Then upon doorbell,
hardware fetches the object context for which the doorbell was rang, and
validates that the UAR through which the DB was rang matches the UAR ID
of the object.

If no match the doorbell is silently ignored by the hardware.  Of
course, the user cannot ring a doorbell on a UAR that was not mapped to
it.

Now in devx, as the devx kernel does not manipulate the QP/SQ/CQ command
mailboxes (except tagging them with UID), we expose to the user its UAR
ID, so it can embed it in these objects in the expected specification
format. So the only thing the user can do is hurt itself by creating a
QP/SQ/CQ with a UAR ID other than his, and then in this case other users
may ring a doorbell on its objects.

The consequence of that will be that another user can schedule a QP/SQ
of the buggy user for execution (just insert it to the hardware schedule
queue or arm its CQ for event generation), no further harm is expected.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support in DEVX for modify and query commands, the required lock is
taken (i.e. READ/WRITE) by the KABI infrastructure accordingly.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support to create and destroy firmware objects via the DEVX
interface.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support to run general firmware command via the DEVX interface.

A command that works on some object (e.g. CQ, WQ, etc.) will be added
in next patches while maintaining the required object lock.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce DEVX to enable direct device commands in downstream patches
from this series.

In that mode of work the firmware manages the isolation between
processes' resources and as such a DEVX user id is created and assigned
to the given user context upon allocation request.

A capability check is done to make sure that this feature is really
supported by the firmware prior to creating the DEVX user id.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Drivers that use the IOCTL API may have the ib_uverbs_file and need a
way to get the related ib_ucontext from it, this is enabled by this
patch.

Downstream patches from this series will use it.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The ioctl parser framework wrongly assumed that each namespace is
populated. This could lead to NULL dereferences. Fix the parser to
always check that a given namespace indeed exists.

Fixes: fac9658c ("IB/core: Add new ioctl interface")
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Sometimes the uverbs uAPI  doesn't really care about the structure it gets
from user-space. All it wants to do is to allocate enough space and send
it to the hardware/provider driver. Adding a UVERBS_ATTR_MIN_SIZE that
could be used for this scenarios. We use USHRT_MAX as the kernel known
size to bypass any zero validations.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Adding UVERBS_ATTR_SPEC_F_ALLOC_AND_COPY flag to PTR_IN attributes.
By using this flag, the parse automatically allocates and copies the
user-space data. This data is accessible by using uverbs_attr_get_len
and uverbs_attr_get_alloced_ptr inline accessor functions from the
handler.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

uverbs_finalize_objects is currently used only to commit or abort
objects. Since we want to add automatic allocation/free of PTR_IN
attributes, moving it to uverbs_ioctl.c and renamit it to
uverbs_finalize_attrs.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As provider drivers could use UVERBS_ATTR_FD and UVERBS_ATTR_IDR macros
need to export them.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch updates the mlx5_ifc structures and
command interface to support DEVX.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

When DEVX is used application builds by itself the command mail box,
this patch prevents warns upon firmware commands as of invalid user
space usage.

In addition,
A failure in destroy_mkey command was changed to be printed only under
debug mode.

This prevents a redundant warn when a memory window was used
with rereg_mr and finally was some kernel cleanup as of reset
flow/process termination.

In that case this command might temporarily fails as part of the cleanup
but finally it expects to succeed.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

memcpy() of mapped addresses is done twice in c4iw_create_listen(),
removing the duplicate memcpy().

Fixes: 170003c8 ("iw_cxgb4: remove port mapper related code")
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths.  For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16.  Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: NSagi Grimberg <sagi@grimberg.me>
Acked-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Acked-by: NShiraz Saleem <shiraz.saleem@intel.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Before goto err2, the variable qp is checked. So it is not necessary
to check qp in label err2.
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Set the vlan flag and vlan_id field in the wc for rdma_listen()
to work over VLAN. This is required by ib_init_ah_attr_from_wc()
which is called by the CM REQ handler.
Signed-off-by: NVijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: NYonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Increase the max MR limit to support more I/O queues
for NVMe over Fabrics hosts.
Signed-off-by: NVijay Immanuel <vijayi@attalasystems.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Allocate agent IDs from a global IDR instead of an atomic variable.
This eliminates the possibility of reusing an ID which is already in
use after 4 billion registrations.  We limit the assigned ID to be less
than 2^24 as the mlx4 driver uses the most significant byte of the agent
ID to store the slave number.  Users unlucky enough to see a collision
between agent numbers and slave numbers see messages like:

 mlx4_ib: egress mad has non-null tid msb:1 class:4 slave:0

and the MAD layer stops working.

We look up the agent under protection of the RCU lock, which means we
have to free the agent using kfree_rcu, and only increment the reference
counter if it is not 0.
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reported-by: NHans Westgaard Ry <hans.westgaard.ry@oracle.com>
Acked-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Tested-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

For UD the drivers were doing a sgid_index lookup into the cache to get
the attrs, however we can now directly access the same attrs stores in
the ib_ah instead and remove the lookup.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

If the AH has a GRH then hold a reference to the sgid_attr inside the
common struct.

If the QP is modified with an AV that includes a GRH then also hold a
reference to the sgid_attr inside the common struct.

This informs the cache that the sgid_index is in-use so long as the AH or
QP using it exists.

This also means that all drivers can access the sgid_attr directly from
the ah_attr instead of querying the cache during their UD post-send paths.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

While converting GID index from attribute to that of the HCA, GID
attribute is available from the ah_attr. Make use of GID attribute
to simplify the code and also avoid avoid GID query.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.

Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Introduce AH attribute copy, move and replace APIs to be used by core and
provider drivers.

In CM code flow when ah attribute might be re-initialized twice while
processing incoming request, or initialized once while from path record
while sending out CM requests. Therefore use rdma_move_ah_attr API to
handle such scenarios instead of memcpy().

Provider drivers keeps a copy ah_attr during the lifetime of the ah.
Therefore, use rdma_replace_ah_attr() which conditionally release
reference to old ah_attr and holds reference to new attribute whose
referrence is released when the AH is freed.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

No reason to call rdma_ah_retrieve_grh, tidy whitespace, and add a
function comment block.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

The sgid_attr will ultimately replace the sgid_index in the ah_attr.
This will allow for all layers to have a consistent view of what
gid table entry was selected as processing runs through all stages of the
stack.

This commit introduces the pointer and ensures it is set before calling
any driver callback that includes a struct ah_attr callback, allowing
future patches to adjust both the drivers and the callers to use
sgid_attr instead of sgid_index.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Since we are adding some new fields to this structure it is safest if all
users reliably initialize the struct to zero.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Document this (it's implicitly true due to sleeping operations already
in use in both registration and deregistration).  Use this fact to use
spin_lock_irq instead of spin_lock_irqsave.  This improves performance
slightly.
Signed-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

struct rxe_global_route and struct ib_global_route are not the same thing
and should not be memcpy'd over each other, do a member by member copy
instead. This allows the layout of the in-kernel struct ib_global_route to
be changed without breaking rxe.
Reviewed-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Commit f43c00c0 ("i40iw: Extend port reuse support for listeners")
introduces a sparse warning:

include/linux/spinlock.h:365:9: sparse: context imbalance in
'i40iw_manage_apbvt' - unexpected unlock

Fix this by reorganizing the acquire/release of locks in
i40iw_manage_apbvt and add a new function i40iw_cqp_manage_abvpt_cmd
to perform the CQP command. Also, use __clear_bit and __test_and_set_bit
as we do not need atomic versions.

Fixes: f43c00c0 ("i40iw: Extend port reuse support for listeners")
Suggested-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Simplify the flow_resources_alloc() function call by reducing
number of goto statements.
Reviewed-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Port capability flag represents IBTA PortInfo:CapabilityMask,
but was mistakenly mixed with non-relevant fields. Return that
information for IB only.

Link: https://patchwork.kernel.org/patch/10386245/Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

rxe_netdev_from_av can now be done by the core code directly from the
gid_attrs, no need for a helper in the driver.

ib_find_cached_gid_by_port can be switched to use the rdma version here as
well.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If the gid_attr argument is NULL then the functions behave identically to
rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything
can be consolidated to one function.

Now that all callers either use rdma_query_gid() or ib_get_cached_gid(),
ib_query_gid() API is removed.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no reason to restrict this function to roce only these days,
allow the filter function to be called on any protocol.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

These versions are functionally similar but all return gid_attrs and
related information via reference instead of via copy.

The old API is preserved, implemented as wrappers around the new, until
all callers can be converted.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>