- 03 5月, 2007 32 次提交
-
-
由 Lasse Collin 提交于
Hi! I sent this simple patch to lkml about two weeks ago and also cc'ed to Linus, but seems that the patch got ignored. I decided to write to you, because you have modified the relevant file most recently. Below is a copy of the mail that is also available at <http://lkml.org/lkml/2007/2/28/230>. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jeremy Fitzhardinge 提交于
The reboot_fixups stuff seems to be a bit of a mess, specifically the header is in linux/ when its a purely i386-specific piece of code. I'm not sure why it has its config option; its only currently needed for "geode-gx1/cs5530a", so perhaps whatever config option controls that hardware should enable this? Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Aneesh Kumar K.V 提交于
Explicity specify that the caller should pin the user memory otherwise the function will sleep Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
The kernel only supports gcc 3.2+ now so it doesn't make sense anymore to explicitely check for options this compiler version already has. This actually fixes a bug. The -mprefered-stack-boundary check never worked because gcc rightly complains CC arch/i386/kernel/asm-offsets.s cc1: -mpreferred-stack-boundary=2 is not between 4 and 12 We just never saw the error because of cc-options. I changed it to 4 to actually work. Tested by compiling i386 and x86-64 defconfig with gcc 3.2. Should speed up the build time a tiny bit and improve stack usage on i386 slightly. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Pointed out by Adrian Bunk Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Prarit Bhargava 提交于
Change sysenter_setup to __cpuinit. Change __INIT & __INITDATA to be cpu hotplug aware. Resolve MODPOST warnings similar to: WARNING: vmlinux - Section mismatch: reference to .init.text:sysenter_setup from .text between 'identify_cpu' (at offset 0xc040a380) and 'detect_ht' and WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_int80_end from .text between 'sysenter_setup' (at offset 0xc041a269) and 'enable_sep_cpu' WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_int80_start from .text between 'sysenter_setup' (at offset 0xc041a26e) and 'enable_sep_cpu' WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_sysenter_end from .text between 'sysenter_setup' (at offset 0xc041a275) and 'enable_sep_cpu' WARNING: vmlinux - Section mismatch: reference to .init.data:vsyscall_sysenter_start from .text between 'sysenter_setup' (at offset 0xc041a27a) and 'enable_sep_cpu' Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Prarit Bhargava 提交于
Add __init to probe_bigsmp. All callers are __init and data being examined is __initdata. Resolves MODPOST warning similar to: WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'probe_bigsmp' (at offset 0xc0401e56) and 'init_apic_ldr' Signed-off-by: NPrarit Bhargava <prarit@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Stephane Eranian 提交于
Hello, This patch against 2.6.20-git14 makes the NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting Intel architectural perfmon, such as Intel Core 2. Although all PMU events can work on both counters, the Precise Event-Based Sampling (PEBS) requires that the event be in PERFCTR0 to work correctly (see section 18.14.4.1 in the IA32 SDM Vol 3b). This versions has 3 chunks compared to previous where we had missed on check. Changelog: - make the x86-64 NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting the Intel architectural perfmon (e.g. Core 2 Duo). This allows PEBS to work when the NMI watchdog is active. signed-off-by: Nstephane eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Stephane Eranian 提交于
Hello, This patch against 2.6.20-git14 makes the NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting Intel architectural perfmon, such as Intel Core 2. Although all PMU events can work on both counters, the Precise Event-Based Sampling (PEBS) requires that the event be in PERFCTR0 to work correctly (see section 18.14.4.1 in the IA32 SDM Vol 3b). A similar patch for x86-64 is to follow. Changelog: - make the i386 NMI watchdog use PERFSEL1/PERFCTR1 instead of PERFSEL0/PERFCTR0 on processors supporting the Intel architectural perfmon (e.g. Core 2 Duo). This allows PEBS to work when the NMI watchdog is active. signed-off-by: Nstephane eranian <eranian@hpl.hp.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Move prototypes into header files Remove unneeded includes. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
a userspace fault or a kernelspace fault which will result in the immediate death of the process. They should not be filled in as a result of a kernelspace fault which can be fixed up. Otherwise, if the process is handling SIGSEGV and examining the fault information, this can result in the kernel space fault trashing the previously stored fault information if it arrives between the userspace fault happening and the SIGSEGV being delivered to the process. Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NJan Beulich <jbeulich@novell.com> -- arch/i386/kernel/traps.c | 24 ++++++++++++++++++------ arch/x86_64/kernel/traps.c | 30 +++++++++++++++++++++++------- 2 files changed, 41 insertions(+), 13 deletions(-)
-
由 Jan Beulich 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Rene Herman 提交于
Remove the assumption that if the first page of a legacy ROM is mapped, it'll all be mapped. This'll also stop people reading this code from wondering if they're looking at a bug... Signed-off-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NMartin Murray <murrayma@citi.umich.edu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Simon Arlott 提交于
The VIA C7 is a 686 (with TSC) that supports MMX, SSE and SSE2, it also has a cache line length of 64 according to http://www.digit-life.com/articles2/cpu/rmma-via-c7.html. This patch sets gcc to -march=686 and select s the correct cache shift. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 takada 提交于
Eliminated the arch/i386/kernel/timers in 2.6.18, use clocksoures instead. pit_latch_buggy was referred in timers/timer_tsc.c, and currently removed. Therefore nobody refer it. Until 2.6.17, MediaGX's TSC works correctly. after 2.6.18, warned "TSC appears to be running slowly. Marking it as unstable". So marked unstable TSC when CS55x0. Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Whether a region is below 1Mb is determined by its start rather than its end. This hunk got erroneously dropped from a previous patch. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
No need to use -traditional for processing asm in i386/kernel/ Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Synchronize i386's smp_send_stop() with x86-64's in only try-locking the call lock to prevent deadlocks when called from panic(). In both version, disable interrupts before clearing the CPU off the online map to eliminate races with IRQ handlers inspecting this map. Also in both versions, save/restore interrupts rather than disabling/ enabling them. On x86-64, eliminate one function used here by folding it into its single caller, convert to static, and rename for consistency with i386 (lkcd may like this). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Avoid including asm/vsyscall32.h in virtually every source file. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
Move inclusion of asm/fixmap.h to where it is really used rather than where it may have been used long ago (requires a few other adjustments to includes due to previous implicit dependencies). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Jan Beulich 提交于
- make the page table contents printing PAE capable - make sure the address stored in current->thread.cr2 is unmodified from what was read from CR2 - don't call oops_may_print() multiple times, when one time suffices - print pte even in highpte case, as long as the pte page isn't in actually in high memory (which is specifically the case for all page tables covering kernel space) (Changes to v3: Use sizeof()*2 rather than the suggested sizeof()*4 for printing width, use fixed 16-nibble width for PAE, and also apply the max_low_pfn range check to the middle level lookup on PAE.) Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Ingo Molnar 提交于
Default to physical mode on hotplug CPU kernels. Furher simplify and clean up the APIC initialization code. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Ingo Molnar 提交于
Remove now unused clustered APIC mode code. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Ingo Molnar 提交于
Remove clustered APIC mode. There's little point in the use of clustered APIC mode, broadcasting is limited to within the cluster only, and chipsets have bugs in this area as well. So default to physical APIC mode when the CPU count is large, and default to logical APIC mode when the CPU count is 8 or smaller. (this patch only removes the use of genapic_cluster and cleans up the resulting genapic.c file - removal of all remaining traces of clustered mode will be done by another patch.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Ingo Molnar 提交于
Fix a couple of inconsistencies/problems I found while reviewing the x86_64 genapic code (when I was chasing mysterious eth0 timeouts that would only trigger if CPU_HOTPLUG is enabled): - AMD systems defaulted to the slower flat-physical mode instead of the flat-logical mode. The only restriction on AMD systems is that they should not use clustered APIC mode. - removed the CPU hotplug hacks, switching the default for small systems back from phys-flat to logical-flat. The switching to logical flat mode on small systems fixed sporadic ethernet driver timeouts i was getting on a dual-core Athlon64 system: NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timeout, status 0c 0005 c07f media 80. eth0: Tx queue start entry 32 dirty entry 28. eth0: Tx descriptor 0 is 0008a04a. (queue head) eth0: Tx descriptor 1 is 0008a04a. eth0: Tx descriptor 2 is 0008a04a. eth0: Tx descriptor 3 is 0008a04a. eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 - The use of '<= 8' was a bug by itself (the valid APIC ids for logical flat mode go from 0 to 7, not 0 to 8). The new logic is to use logical flat mode on both AMD and Intel systems, and to only switch to physical mode when logical mode cannot be used. If CPU hotplug is racy wrt. APIC shutdown then CPU hotplug needs fixing, not the whole IRQ system be made inconsistent and slowed down. - minor cleanups: simplified some code constructs build & booted on a couple of AMD and Intel SMP systems. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Andrew Morton 提交于
Obsoleted by Ingo's genapic stuff. Cc: Ingo Molnar <mingo@elte.hu> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andrew Morton 提交于
This is obsoleted by new Ingo genapic patches. Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andrew Morton 提交于
This is unneeded with Ingo's genapic rework. Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 01 5月, 2007 8 次提交
-
-
由 Linus Torvalds 提交于
The Marvell IDE interface on my machine would hit a BUG_ON() in lib/iomem.c because it was calling ata_pci_init_one() specifying just a single port on the host, but that would actually end up trying to initialize two ports, the second one with bogus information. This fixes "ata_pci_init_one()" so that it actually passes down the n_ports variable that it got from the low-level driver to the host allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA layer actually having the correct port number information. And in order to make it all work, I also needed to fix a few places that had incorrectly hard-coded the fact that a host always had exactly two ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would just always iterate over both ports). Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
For backwards compatibility, call_platform_enable_wakeup() can return 0 instead of -EIO since we aren't guaranteed to have errno defined. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
Add a kvasprintf() function to complement kasprintf(). No in-tree users yet, but I have some coming up. [akpm@linux-foundation.org: EXPORT it] Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Keir Fraser <keir@xensource.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
This patch changes the docs and behaviour from "all states valid" to "no states valid" if no .valid callback is assigned. Users of pm_ops that only need mem sleep can assign pm_valid_only_mem without any overhead, others will require more elaborate callbacks. Now that all users of pm_ops have a .valid callback this is a safe thing to do and prevents things from getting messy again as they were before. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NPavel Machek <pavel@ucw.cz> Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl> Cc: <linux-pm@lists.linux-foundation.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
Almost all users of pm_ops only support mem sleep, don't check in .valid and don't reject any others in .prepare so users can be confused if they check /sys/power/state, especially when new states are added (these would then result in s-t-r although they're supposed to be something different). This patch implements a generic pm_valid_only_mem function that is then exported for users and puts it to use in almost all existing pm_ops. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: linux-pm@lists.linux-foundation.org Cc: Len Brown <lenb@kernel.org> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
This patch removes the firmware disk suspend mode which is the wrong approach, it is supposed to be used for implementing firmware-based disk suspend but cannot actually be used for that. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: <linux-pm@lists.linux-foundation.org> Cc: David Brownell <david-b@pacbell.net> Cc: Len Brown <lenb@kernel.org> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
This patch series cleans up some misconceptions about pm_ops. Some users of the pm_ops structure attempt to use it to stop the user from entering suspend to disk, this, however, is not possible since the user can always use "shutdown" in /sys/power/disk and then the pm_ops are never invoked. Also, platforms that don't support suspend to disk simply should not allow configuring SOFTWARE_SUSPEND (read the help text on it, it only selects suspend to disk and nothing else, all the other stuff depends on PM). The pm_ops structure is actually intended to provide a way to enter platform-defined sleep states (currently supported states are "standby" and "mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured) allows a platform to support a platform specific way to enter low-power mode once everything has been saved to disk. This is currently only used by ACPI (S4). This patch: The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really seems to understand what it actually does. This patch clarifies the pm_disk_mode description. It also removes all the arm and sh users that think they can veto suspend to disk via pm_ops; not so since the user can always do echo shutdown > /sys/power/disk, they need to find a better way involving Kconfig or such. ACPI is the only user left with a non-zero pm_disk_mode. The patch also sets the default mode to shutdown again, but when a new pm_ops is registered its pm_disk_mode is selected as default, that way the default stays for ACPI where it is apparently required. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: David Brownell <david-b@pacbell.net> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Acked-by: NRussell King <rmk@arm.linux.org.uk> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Mahoney 提交于
We're getting lockdep warnings due to a post-2.6.21-rc7 bugfix. The xattr_sem can never be taken in the manner described. Internal inodes are protected by I_PRIVATE. Add the appropriate annotation. Cc: <stable@kernel.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-