- 24 6月, 2013 18 次提交
-
-
由 David S. Miller 提交于
Yuval Mintz says: ==================== This patch series mostly revolves around improving SR-IOV implementation (Better PF-VF relation, sanity checks and timings), as well as including a patch correcting the (outward) advertisement of 20G capabilities. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yaniv Rosner 提交于
Don't claim 20G is supported if the speed is unsupported by the phys (reflected by various ethtools and ndos). Signed-off-by: NYaniv Rosner <yanivr@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
Wait 100ms for FLR to complete in parallel over all VFs instead of serializing the waits (which can amount to several seconds with 64 VFs). Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
If iproute2 VF callbacks are invoked before PF is loaded, abort gracefully. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ariel Elior 提交于
If PF is unloaded with loaded VFs, signal towards VFs so they can detect this gracefully. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> ---- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 23 +++++++++++++++++++--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 24 ++++++++++++++++++++--- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 12 +++++++++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.h | 5 ++++- 7 files changed, 63 insertions(+), 8 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asias He 提交于
If we mod with VSOCK_HASH_SIZE -1, we get 0, 1, .... 249. Actually, we have vsock_bind_table[0 ... 250] and vsock_connected_table[0 .. 250]. In this case the last entry will never be used. We should mod with VSOCK_HASH_SIZE instead. Signed-off-by: NAsias He <asias@redhat.com> Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asias He 提交于
Signed-off-by: NAsias He <asias@redhat.com> Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asias He 提交于
vmci_transport_recv_dgram_cb always return VMCI_SUCESS even if we fail to allocate skb, return VMCI_ERROR_NO_MEM instead. Signed-off-by: NAsias He <asias@redhat.com> Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Asias He 提交于
This peace of code is called three times, let's have a helper for it. Signed-off-by: NAsias He <asias@redhat.com> Acked-by: NAndy King <acking@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
This is debug info, should at least be pr_debug(), but given that this code is in upstream for two years, there is no need to keep this debugging printk any more, so just remove it. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Implement shutdown and resume handlers for 83xx. o Refactor 82xx shutdown and resume handlers. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Issue 'set driver version' during driver load and after reset recovery to notify the driver version to the firmware. Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
This patch adds support to read memory section of adapter dump using PEX DMA method. This method significantly improves total adapter dump collection time. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
o Minimize sleep duration and check for adapter status. o Exit from loopback test if adapter reset is detected. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Add support for configuring secondary unicast address which will use existing HW filters to store all the unicast MAC addresses and prevent device going into promiscuous mode. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
qlcnic_alloc_mbx_args() may fail due to failure in memory allocation. This patch checks for failure of qlcnic_alloc_mbx_args() to avoid potential invalid memory access. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2013 22 次提交
-
-
由 Joe Perches 提交于
This typedef is unnecessary and should just be removed. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
This typedef is unnecessary and should just be removed. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
This patch removes an empty ifdef from inet_frag_intern() in net/ipv4/inet_fragment.c. commit b67bfe0d (hlist: drop the node parameter from iterators) removed hlist from net/ipv4/inet_fragment.c, but did not remove the enclosing ifdef command, which is now empty. Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
htb_sched structures are big, and source of false sharing on SMP. Every time a packet is queued or dequeue, many cache lines must be touched because structures are not lay out properly. By carefully splitting htb_sched in two parts, and define sub structures to increase data locality, we can improve performance dramatically on SMP. New htb_prio structure can also be used in htb_class to increase data locality. I got 26 % performance increase on a 24 threads machine, with 200 concurrent netperf in TCP_RR mode, using a HTB hierarchy of 4 classes. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
In previous discussions, I tried to find some reasonable heuristics for delayed ACK, however this seems not possible, according to Eric: "ACKS might also be delayed because of bidirectional traffic, and is more controlled by the application response time. TCP stack can not easily estimate it." "ACK can be incredibly useful to recover from losses in a short time. The vast majority of TCP sessions are small lived, and we send one ACK per received segment anyway at beginning or retransmits to let the sender smoothly increase its cwnd, so an auto-tuning facility wont help them that much." and according to David: "ACKs are the only information we have to detect loss. And, for the same reasons that TCP VEGAS is fundamentally broken, we cannot measure the pipe or some other receiver-side-visible piece of information to determine when it's "safe" to stretch ACK. And even if it's "safe", we should not do it so that losses are accurately detected and we don't spuriously retransmit. The only way to know when the bandwidth increases is to "test" it, by sending more and more packets until drops happen. That's why all successful congestion control algorithms must operate on explicited tested pieces of information. Similarly, it's not really possible to universally know if it's safe to stretch ACK or not." It still makes sense to enable or disable quick ack mode like what TCP_QUICK_ACK does. Similar to TCP_QUICK_ACK option, but for people who can't modify the source code and still wants to control TCP delayed ACK behavior. As David suggested, this should belong to per-path scope, since different pathes may want different behaviors. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Graf <tgraf@suug.ch> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yijing Wang 提交于
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init() in init path. So we can use pdev->pm_cap instead of using pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yijing Wang 提交于
Pci core has been saved pm cap register offset by pdev->pm_cap in pci_pm_init() in init path. So we can use pdev->pm_cap instead of using pci_find_capability(pdev, PCI_CAP_ID_PM) for better performance and simplified code. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: netdev@vger.kernel.org (open list:NETWORKING DRIVERS) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yijing Wang 提交于
Pci_enable_device() will set device power state to D0, so it's no need to do it again in bnx2x_init_dev(). Also remove redundant PM Cap find code, because pci core has been saved the pci device pm cap value. Signed-off-by: NYijing Wang <wangyijing@huawei.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
ETRAX_ETHERNET selects ETHERNET and MII, which depend on NETDEVICES. I don't think anything should select NETDEVICES, so make it a dependency. It also doesn't need to select or depend on ETHERNET, which has nothing to do with the Ethernet library functions. BPCTL selects MII, which depends on NETDEVICES. But everything in the drivers/staging/silicom directory is related to net devices, so make NET_VENDOR_SILICOM depend on NETDEVICES and remove the now-redundant dependencies on NET. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This has no dependency on any of the drivers under NET_CORE. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weiping Pan 提交于
Signed-off-by: NWeiping Pan <wpan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Also, cleanup bond_alb_handle_active_change() from 2 identical ifs. Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
be_find_vfs() is no longer needed as the common PCI calls provide the same functionality. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
The use of this attribute has been added in 32b8a8e5 (sit: add IPv4 over IPv4 support). It is optional, by default proto is IPPROTO_IPV6. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The current situation is that SOCK_MIN_RCVBUF is 2048 + sizeof(struct sk_buff)) while SOCK_MIN_SNDBUF is 2048. Since in both cases, skb->truesize is used for sk_{r,w}mem_alloc accounting, we should have both sizes adjusted via defining a TCP_SKB_MIN_TRUESIZE. Further, as Eric Dumazet points out, the minimal skb truesize in transmit path is SKB_TRUESIZE(2048) after commit f07d960d ("tcp: avoid frag allocation for small frames"), and tcp_sendmsg() tries to limit skb size to half the congestion window, meaning we try to build two skbs at minimum. Thus, having SOCK_MIN_SNDBUF as 2048 can hit a small regression for some applications setting to low SO_SNDBUF / SO_RCVBUF. Note that we define a TCP_SKB_MIN_TRUESIZE, because SKB_TRUESIZE(2048) adds SKB_DATA_ALIGN(sizeof(struct skb_shared_info)), but in case of TCP skbs, the skb_shared_info is part of the 2048 bytes allocation for skb->head. The minor adaption in sk_stream_moderate_sndbuf() is to silence a warning by using a typed max macro, as similarly done in SOCK_MIN_RCVBUF occurences, that would appear otherwise. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
thresh and interval are global resources, only init net can change them. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
Though we don't export the /proc/sys/net/ipv[4,6]/neigh/default/ directory to the un-init_net, but we can still use cmd such as "ip ntable change name arp_cache locktime 129" to change the locktime of default neigh_parms. This patch disallows the un-init_net to find out the neigh_table.parms. So the un-init_net will failed to influence the init_net. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
neigh_table.parms always exist and is initialized,kmemdup can use it to create new neigh_parms, actually lookup_neigh_parms here will return neigh_table.parms too. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Check next packet availability by validating that HW has finished CQE placement. This saves latency of another dma transaction performed to update SB indexes. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Adds ndo_ll_poll method and locking for FPs between LL and the napi. When receiving a packet we use skb_mark_ll to record the napi it came from. Add each napi to the napi_hash right after netif_napi_add(). Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-