What is the value shown in "cpu MHz" of /proc/cpuinfo when CPUs are capable of
changing frequency?

Today the answer is: It depends.
On i386:
SMP kernel - It is always the boot frequency
UP kernel - Scales with the frequency change and shows that was last set.

On x86_64:
There is one single variable cpu_khz that gets written by all the CPUs. So,
the frequency set by last CPU will be seen on /proc/cpuinfo of all the
CPUs in the system. What you see also depends on whether you have constant_tsc
capable CPU or not.

On ia64:
It is always boot time frequency of a particular CPU that gets displayed.

The patch below changes this to:
Show the last known frequency of the particular CPU, when cpufreq is present. If
cpu doesnot support changing of frequency through cpufreq, then boot frequency
will be shown. The patch affects i386, x86_64 and ia64 architectures.

Signed-off-by: Venkatesh Pallipadi<venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

There are some callers in cpufreq hotplug notify path that the lowest
function calls lock_cpu_hotplug().  The lock is already held during
cpu_up() and cpu_down() calls when the notify calls are broadcast to
registered clients.

Ideally if possible, we could disable_preempt() at the highest caller and
make sure we dont sleep in the path down in cpufreq->driver_target() calls
but the calls are so intertwined and cumbersome to cleanup.

Hence we consistently use lock_cpu_hotplug() and unlock_cpu_hotplug() in
all places.

 - Removed export of cpucontrol semaphore and made it static.
 - removed explicit uses of up/down with lock_cpu_hotplug()
   so we can keep track of the the callers in same thread context and
   just keep refcounts without calling a down() that causes a deadlock.
 - Removed current_in_hotplug() uses
 - Removed PF_HOTPLUG_CPU in sched.h introduced for the current_in_hotplug()
   temporary workaround.

Tested with insmod of cpufreq_stat.ko, and logical online/offline
to make sure we dont have any hang situations.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Cc: Zwane Mwaikambo <zwane@linuxpower.ca>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/cpufreq/cpufreq.c: In function `cpufreq_remove_dev':
drivers/cpufreq/cpufreq.c:696: warning: unused variable `cpu_sys_dev'
Signed-off-by: NGrant Coady <gcoady@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When calling target drivers to set frequency, we take cpucontrol lock.
When we modified the code to accomodate CPU hotplug, there was an attempt
to take a double lock of cpucontrol leading to a deadlock.  Since the
current thread context is already holding the cpucontrol lock, we dont need
to make another attempt to acquire it.

Now we leave a trace in current->flags indicating current thread already is
under cpucontrol lock held, so we dont attempt to do this another time.

Thanks to Andrew Morton for the beating:-)

From: Brice Goglin <Brice.Goglin@ens-lyon.org>

  Build fix

(akpm: this patch is still unpleasant.  Ashok continues to look for a cleaner
solution, doesn't he?  ;))
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cpufreq entries in sysfs should only be populated when CPU is online state.
 When we either boot with maxcpus=x and then boot the other cpus by echoing
to sysfs online file, these entries should be created and destroyed when
CPU_DEAD is notified.  Same treatement as cache entries under sysfs.

We place the processor in the lowest frequency, so hw managed P-State
transitions can still work on the other threads to save power.

Primary goal was to just make these directories appear/disapper dynamically.

There is one in this patch i had to do, which i really dont like myself but
probably best if someone handling the cpufreq infrastructure could give
this code right treatment if this is not acceptable.  I guess its probably
good for the first cut.

- Converting lock_cpu_hotplug()/unlock_cpu_hotplug() to disable/enable preempt.
  The locking was smack in the middle of the notification path, when the
  hotplug is already holding the lock. I tried another solution to avoid this
  so avoid taking locks if we know we are from notification path. The solution
  was getting very ugly and i decided this was probably good for this iteration
  until someone who understands cpufreq could do a better job than me.

(akpm: export cpucontrol to GPL modules: drivers/cpufreq/cpufreq_stats.c now
does lock_cpu_hotplug())
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Zwane Mwaikambo <zwane@holomorphy.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cpu_sys_devices is redundant with the new API get_cpu_sysdev().  So nuking
this usage since its not needed.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Zwane Mwaikambo <zwane@holomorphy.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDave Jones <davej@redhat.com>

A minor fix for cpufreq_add_dev() error path. We need to call driver->exit()
if driver_init() call has succeeded.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

* ret has no need to be unsigned in cpufreq_driver_target()
* ret has no need to be initialized in __cpufreq_governor()
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Fix u32 vs pm_message_t confusion in cpufreq.
Signed-off-by: NBernard Blackham <bernard@blackham.com.au>
Signed-off-by: NPavel Machek <pavel@suse.cz>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

sysfs: fix the rest of the kernel so if an attribute doesn't
       implement show or store method read/write will return
       -EIO instead of 0 or -EINVAL or -EPERM.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

cpufreq core is printing out messages at KERN_WARNING level that the core
recovers from without intervention, and that the system administrator can
do nothing about.  Patch below reduces the severity of these messages to
debug.
Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Jones <davej@redhat.com>

The cpufreq core patch I sent earlier got only half-applied.  I added a
flag to let the low level driver disable an annoying warning on
suspend/resume that is normal on ppc, but the "resume" part of it wasn't
applied.

This just adds back that missing bit.  The original patch also reworked
the resume() function to avoid nesting too many if () statements along
the way I did the suspend() one, but I didn't include that in the patch
below.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In order to properly fix some issues with cpufreq vs. sleep on
PowerBooks, I had to add a suspend callback to the pmac_cpufreq driver.
I must force a switch to full speed before sleep and I switch back to
previous speed on resume.

I also added a driver flag to disable the warnings in suspend/resume
since it is expected in this case to have different speed (and I want it
to fixup the jiffies properly).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!