mode_fixup function for encoder drivers became optional with patch
http://patchwork.freedesktop.org/patch/msgid/1455106522-32307-1-git-send-email-palminha@synopsys.com

This patch set nukes all the dummy mode_fixup implementations.

(made on top of Daniel topic/drm-misc branch)
Signed-off-by: NCarlos Palminha <palminha@synopsys.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/8bf274e8f6908142a9f940d3f2913e4a735e0caa.1455540137.git.palminha@synopsys.com

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/imx/imxdrm.ko:
-.rodata                      624
+.rodata                      652
-.data                        372
+.data                        344

 drivers/gpu/drm/imx/imx-ipuv3-crtc.ko:
-.rodata                      224
+.rodata                      280
-.data                        184
+.data                        128

 drivers/gpu/drm/imx/imx-ldb.ko:
-.rodata                      660
+.rodata                      784
-.data                        240
+.data                        116

 drivers/gpu/drm/imx/imx-tve.ko:
-.rodata                      400
+.rodata                      524
-.data                        416
+.data                        292

 drivers/gpu/drm/imx/parallel-display.ko:
-.rodata                      400
+.rodata                      524
-.data                        216
+.data                         92
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-22-git-send-email-boris.brezillon@free-electrons.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Done with coccinelle for the most part. However, it thinks '...' is
part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder
in its place and got rid of it with sed afterwards.

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      )
{ ... }

@@
identifier dev, encoder, funcs;
@@
 int drm_encoder_init(struct drm_device *dev,
                      struct drm_encoder *encoder,
                      const struct drm_encoder_funcs *funcs,
                      int encoder_type
+                     ,const char *name, int DOTDOTDOT
                      );

@@
expression E1, E2, E3, E4;
@@
 drm_encoder_init(E1, E2, E3, E4
+                 ,NULL
                  )

v2: Add ', or NULL...' to @name kernel doc (Jani)
    Annotate the function with __printf() attribute (Jani)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com

This worked before the dw-hdmi bridge code was changed to validate
the setup data more strictly. Add back support for modes with a
pixel clock up to 216MHz. Even higher clocks should work, but we
are missing the required setup data for now.

Also change the mode validate callbacks to disallow modes with
higher pixelclocks, so we don't end up failing the modeset later
on.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

The phy comments in dw_hdmi.c applied to the iMX6 version.  Move these
comments to the iMX6 dw_hdmi-imx data along side the data.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Because of iMX6 & Rockchip have differnet mpll config parameter,
the VLEVCTRL parameter would be different. In this case we should
separate VLEVCTRL setting from the common dw_hdmi driver, config
this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip)
Signed-off-by: NYakir Yang <ykk@rock-chips.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NEmil Renner Berthing <kernel@esmil.dk>

imx-drm internally misused the V4L2_PIX_FMT constants, which are supposed to
describe the pixel format of frame buffers in memory, to describe the pixel
format on the bus between the display controller and the encoder hardware.
Now that MEDIA_BUS_FMT constants are available to drm drivers, use those
instead.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Tested-by: NEmil Renner Berthing <kernel@esmil.dk>

The loop iterating over curr_ctrl in dw_hdmi terminates on mpixelclock == ~0UL,
so there needs to be an end of list element here in case a mode with a pixel
clock larger than 216 MHz is set.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

This patch limits the pixel clock to 13.4 MHz - 266 MHz for i.MX6Q
and 13.5 MHz - 270 MHz for i.MX6DL, which is the range documented
in the HDMI Transmitter chapter of the respective reference manuals.

Without this patch, when connected to a monitor capable of 2160p60
modes, dw_hdmi will happily report this mode and the IPU code will
cause a division by zero in ipu_di_config_clock when trying to figure
out how to divide the 264 MHz HSP clock down to ~600 MHz.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

the original imx hdmi driver is under drm/imx/,
which depends on imx-drm, so move the imx hdmi
driver out to drm/bridge and rename it to dw_hdmi
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

hdmi phy configuration is platform specific, which can be adjusted
according to the board to get the best SI
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

IMX6 and Rockchip RK3288 and JZ4780 (Ingenic Xburst/MIPS)
use the interface compatible Designware HDMI IP, but they
also have some lightly differences, such as phy pll configuration,
register width, 4K support, clk useage, and the crtc mux configuration
is also platform specific.

To reuse the imx hdmi driver, convert it to drm_bridge

handle encoder in imx-hdmi_pltfm.c, as most of the encoder
operation are platform specific such as crtc select and
panel format set

This patch depends on Russell King's patch:
 drm: imx: convert imx-drm to use the generic DRM OF helper
 http://driverdev.linuxdriverproject.org/pipermail/driverdev-devel/2014-July/053484.htmlSigned-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NYakir Yang <ykk@rock-chips.com>
Tested-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>