On this model, when KBD is in active multiplexing mode, acknowledgements
to reset and get ID commands issued on KBD port sometimes are delivered
to AUX3 port (touchpad) which messes up device detection. Legacy KBC
mode works fine and since there are no external PS/2 ports on this laptop
and no support for docking station we can safely disable active MUX mode.
Tested-by: NCarlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This small snippet escaped last round of int -> bool conversion.
Reported-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It seems that many laptops do not fully implement AUX LOOP command in
their keyboard controllers, causing issues with touchpad detection.
We know however that almost every laptop/portable uses a PS/2 pointing
device and, even if user disables it in favor of an external mouse,
the system will not use IRQ 12 for anything else. Therefore we may
bypass AUX IRQ delivery test when running on a laptop and assume that
it is routed properly.

Just to be safe we require the box to have good PNP data in order to
bypass the test.

[Jin Dongming <jin.dongming@np.css.fujitsu.com>: fix crash caused
 by missing terminator in the DMI table]
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When KBC is in active multiplexing mode, disabling and re-enabling the
touchpad with the special key leaves the touchpad dead. Since the laptop
does not have any external PS/2 ports disabling MUX mode should be safe.
Reported-by: NEugeniy Meshcheryakov <eugen@debian.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The synaptic touchpad on the Asus G1S is not properly detected when
rebooting machine or on cold boot from time to time. Adding the Asus
G1S to the noloop exception table resolves the issue.

# dmidecode 2.10
SMBIOS 2.4 present.

Handle 0x0001, DMI type 1, 27 bytes
System Information
     Manufacturer: ASUSTeK Computer Inc.
     Product Name: G1S
     Version: 1.0
     Wake-up Type: Power Switch
     SKU Number:
     Family:
Signed-off-by: NJory A. Pratt <geekypenguin@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When testing Moblin on various netbooks, we've got reports that
many MSI Wind clones need the i8042 reset quirks for the keyboard
and/or touchpad's proper function.
Signed-off-by: NYan Li <yan.i.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There are several DMI tables in the i8042 (keyboard) driver already, but
not one for the i8042.reset option.  This patch adds such an option.

Two users for this table are added as well, the MSI Wind U-100 and the LG
X110.  The MSI Wind also needs to be in the "don't trust the pnp data" for
the touchpad to work on my machine.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reported-by: NKenneth Crudup <kenny@panix.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Dell Vostro needs 'nomux' quirk, otherwise the touchpad misbehaves.
Reported-by: NRobert Kiwanuka <robert.kiwanuka@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Gigabyte M912's touchpad needs i8042.noloop for working.
Signed-off-by: NOzan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reported-by: NJaime Cura <jimyx17@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Dell XPS M1530 needs i8042.nomux=1 for ALPS touchpad to work as
reported on https://qa.mandriva.com/show_bug.cgi?id=43532

It is said that before A08 bios version this isn't needed (I don't
have the hardware so can't check), and suppose this will not break
with bios versions before A08.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Tested-by: NAndreas Ericsson <ae@op5.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Thinkpad R31 needs i8042 nomux quirk.  Stops jittery jumping mouse
and random keyboard input. Fixes kernel bug #11723.  Cherry picked
from Ubuntu who have sometimes (on-again-off-again) had a fix in
their patched kernels.
Signed-off-by: NColin B Macdonald <cbm@m.fsf.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Apparently, there are more different versions of Lenovo 3000 N100, some
of them working properly with active mux, and some of them requiring it
being switched off.

This patch applies 'nomux' only to the specific product name that is
reported to behave badly unless 'nomux' is specified.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reported-by: NMattias Jernberg <nostrad@gmail.com>
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The board does not raise AUX IRQ in response to AUX LOOP command.
Reported-by: NGuillaume Morin <guillaume@morinfr.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Acer Aspire 5720 series also requires the Dritek quirk
to enable the extra scancodes.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

AUX LOOP command fails with a timeout although this laptop has
a touchpad.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Gericom Bellagio needs to be added to nomux blacklist, otherwise its
touchpad misbehaves.
Reported-by: NRoland Kletzing <roland.kletzing@materna.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Acer Aspire 1360 needs to be added to nomux blacklist, otherwise its
touchpad misbehaves.
Reported-by: NClark Tompsett <clarkt@cnsp.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to
already existing entry for V2010 model (note that Fujitsu-Siemens changed
the capitalization in the DMI data for product).
Tested-by: NJiri Mleziva <jmleziva@tiscali.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch introduces i8042_dmi_nopnp_table to make it possible to perform
DMI matches for systems that need 'i8042.nopnp' to work correctly, and
introduces such an entry for Intel D845PESV -- this system doesn't
detect PS2 mouse reliably without this option, as reported by Robert
Lewis.

[dtor@mail.ru - make it compile if CONFIG_PNP is off - reported
 by Randy Dunlap]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Acer TravelMate 660 series also requires the Dritek quirk to enable the
extra scancodes.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fix incorrect length argument for strncpy and strncat by replacing them with
strlcpy and strlcat
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Lenovo 3000 N100 needs entry in nomux blacklist.
Reported-by: NChristopher Desjardins <cddesjardins@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Reported-by: NHans Aschauer <Hans.Aschauer@web.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

If firmware does not implement AUX_LOOP comand in 32 bit mode it
is unlikely to implement it in 64 bit mode. Same goes for active
multiplexing. See:

http://bugzilla.kernel.org/show_bug.cgi?id=9664Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Acer Aspire 9110 series also requires the Dritek quirk to enable the
extra scancodes.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Some Wistron based laptops need us to explicitly enable the 'Dritek
keyboard extension' to make their extra keys start generating scancodes.
Originally, this was just confined to older laptops, but a few Acer
laptops have turned up in 2007 that also need this again.
Signed-off-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When booting under Microsoft Virtual Machine, the noloop quirk is
needed, otherwise PS/2 mouse is not properly detected.
Reported-by: NLawrence Steeger <vendor@russte.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This fixes "atkbd.c: Suprious NAK on isa0060/serio0" errors for
HP Pavilion DV4270ca.
Signed-off-by: NElvis Pranskevichus <el@prans.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

On some boxes that don't have PS/2 mice connected at startup BIOS
completely disables AUX port and attempts to access it result in
hosed keyboard. Historically we do not trust ACPI/PNP data on
i386 and try to poke AUX port even if we did not find an active
PNP node for it. However in cases when BIOS writers got KBD port
properly described we can assume that they did the right thing
for AUX port as well.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports and, according to documentation,
automatically disables touchpad when an external mouse is plugged
into a port replicator, so MUX mode would not work anyway.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The box does not implement AUX LOOP command properly and so we
can't test for AUX IRQ delivery so blacklist it via DMI and
assume that AUX port is present.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This board does not raise AUX IRQ in response to AUX LOOP command
which interferes with our test for proper AUX IRQ wiring. Put it
in the blacklist and assume mouse is present.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add PNP IDs for Fujitsu touchscreen/touchpad for AUX port
detection to latch onto.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There is no data coming from touchscreen on Panasonic CF-29
notebook unless keyboard controller is in legacy mode.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports so disabling MUX mode is safe.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>