saa7134_buffer_requeue() and set_tvnorm() can become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This board has some special tea5767 configuration. Basically, radio 
XTAL uses a different frequency than the other supported radios. It 
uses a 13 MHz XTAL.

This patch adds the proper radio gpio and tea5767 configurations for 
the board.

Also, with PAL/BG, the board requires some special init for tda9887:
port1=0 port2=0 qss=1

Thanks to Serge Kolotylo and MIDImaster for their help on identifying 
the proper needs for this driver.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

tea5767 has several possible configurations. Before the patch, the
driver were assuming the more common configuration. However, some newer
cards, like MSI @nyware Master requires other configurations, like
de-activating a gpio port and changing chip Xtal.

This patch adds the capability of altering device configuration at
runtime. This may also be used later to activate some features like
auto-mute when signal is weak.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Currently, the only tuner-specific device that allows special
configurations is tda9887. However, tea5767 also may require some
special configurations (for example, to specify a different Xtal freq).

This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl
(TUNER_SET_CONFIG). The newer one allows specifying what tuner is
appliable to a configuration set, and allows an arbitrary configuration
struct.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix overwriting the stack with the version string
(it is currently 10 bytes + zero) when unloading the
capidrv module. Safeguard against overwriting it
should the version string grow in the future.

Should fix Kernel Bug Tracker Bug 9696.
Signed-off-by: NGerd v. Egidy <gerd.von.egidy@intra2net.com>
Acked-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These are derivatives of the AT32AP7000 chip, which means that most of
the code stays the same. Rename a few files, functions, definitions
and config symbols to reflect that they apply to all AP700x chips, and
exclude some platform devices from chips where they aren't present.
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

This patch disables the VGA text console for AVR32 architecture since
it does not provide the vga.h include file.

AVR32 users should use framebuffer console instead if they need a
console on an attached display.
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>

Fix up a number of coding style issues in the drivers/base/ directory
that have annoyed me over the years.  checkpatch.pl is now very happy.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert to use the class iteration api.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert to use the class iteration api.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert to use the class iteration api.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert to use the class iteration api.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert to use the class iteration api.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the following class iteration functions for driver use:
	class_for_each_device
	class_find_device
	class_for_each_child
	class_find_child
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make setup_parent() void as get_device_parent() will always return
either a valid kobject or NULL.
Introduce cleanup_glue_dir() to drop reference grabbed on "glue"
directory by get_device_parent(). Use it for cleanup in device_move()
and device_add() on errors.

This should fix the refcounting problem reported in
http://marc.info/?l=linux-kernel&m=120052487909200&w=2Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Gabor Gombas <gombasg@sztaki.hu>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: David Miller <davem@davemloft.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NJan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This name is just passed to platform_device_alloc which has its parameter
declared const.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When SYSFS=n and MODULES=y, build ends with:

linux-2.6.24-rc6-mm1/drivers/base/module.c: In function 'module_add_driver':
linux-2.6.24-rc6-mm1/drivers/base/module.c:49: error: 'module_kset' undeclared (first use in this function)
make[3]: *** [drivers/base/module.o] Error 1

Below is one possible fix.
Build-tested with all 4 config combinations of SYSFS & MODULES.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

LIST_HEAD has been widely used, so switch to this simpler method.
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We save the current state in the object itself, so we can do proper
cleanup when the last reference is dropped.

If the initial reference is dropped, the object will be removed from
sysfs if needed, if an "add" event was sent, "remove" will be send, and
the allocated resources are released.

This allows us to clean up some driver core usage as well as allowing us
to do other such changes to the rest of the kernel.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that the old kobject_init() function is gone, rename
kobject_init_ng() to kobject_init() to clean up the namespace.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now that the old kobject_add() function is gone, rename kobject_add_ng()
to kobject_add() to clean up the namespace.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Neil Brown <neilb@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This moves the block devices to /sys/class/block. It will create a
flat list of all block devices, with the disks and partitions in one
directory. For compatibility /sys/block is created and contains symlinks
to the disks.

  /sys/class/block
  |-- sda -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  |-- sda1 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda1
  |-- sda10 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda10
  |-- sda5 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda5
  |-- sda6 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda6
  |-- sda7 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda7
  |-- sda8 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda8
  |-- sda9 -> ../../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/sda9
  `-- sr0 -> ../../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0

  /sys/block/
  |-- sda -> ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda
  `-- sr0 -> ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We should remove the glue directory between the class and the bus
device _after_ we sent out the 'remove' event for the device, otherwise
the parent relationship is no longer valid, and composing the path
with deleted sysfs entries will not work.

Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1013) was suggested by David Woodhouse; it fixes a race
in the driver core.  If a device is unregistered at the same time as
its driver is unloaded, the driver's code pages may be unmapped while
the remove method is still running.  The calls to get_driver() and
put_driver() were intended to prevent this, but they don't work if the
driver's module count has already dropped to 0.

Instead, the patch keeps the device on the driver's list until after
the remove method has returned.  This forces the necessary
synchronization to occur.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stop using kobject_register, as this way we can control the sending of
the uevent properly, after everything is properly initialized.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The driver core debugging messages are a mess.  This provides a unified
message that makes them actually useful.

The format for new kobject debug messages should be:
	driver/bus/class: 'OBJECT_NAME': FUNCTION_NAME: message.\n

Note, the class code is not changed in this patch due to pending patches
in my queue that this would conflict with.  A later patch will clean
them up.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes the kobject, and a few other driver-core-only fields
out of struct driver and into the driver core only.  Now drivers can be
safely create on the stack or statically (like they currently are.)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The module driver specific code should belong in the driver core, not in
the kernel/ directory.  So move this code.  This is done in preparation
for some struct device_driver rework that should be confined to the
driver core code only.

This also lets us keep from exporting these functions, as no external
code should ever be calling it.

Thanks to Andrew Morton for the !CONFIG_MODULES fix.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The iseries driver wants to hang kobjects off of its driver, so, to
preserve backwards compatibility, we need to add a call to the driver
core to allow future changes to work properly.

Hopefully no one uses this function in the future and the iseries_veth
driver authors come to their senses so I can remove this hack...

Cc: Dave Larson <larson1@us.ibm.com>
Cc: Santiago Leon <santil@us.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make the ipath driver use the new driver functions so that it does not
touch the sysfs portion of the driver structure.

We also remove the redundant symlink from the device back to the driver,
as it is already in the sysfs tree.  Any userspace tools should be using
the standard symlink, not some driver specific one.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: Arthur Jones <arthur.jones@qlogic.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

CC: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

CC: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is lot like default attributes for devices (and indeed,
a lot of the code is lifted from there).
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The PCI bus should not be trying to declare its own attribute type.
Especially as this code could never ever be called because the driver
core overwrites the driver kobject type to be its own internal type.
Delete all of this code as it was never being used and is not correct.

Also update my copyright on the file while I'm touching things there.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>