The new header file memfd.h from commit 9183df25 ("shm: add
memfd_create() syscall") should be exported.
Signed-off-by: NDavid Drysdale <drysdale@google.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The general form for commit id and description is

  'Commit <12+hexdigits> ("commit description/subject line")'

but commit logs often have relatively long commit ids and the commit
description emds on the next line like:

  Some explanation as to why commit <12+hexdigits>
  ("commit foo description/subject line") is improved.

Allow this form.
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NJoe Lawrence <joe.lawrence@stratus.com>
Tested-by: NJoe Lawrence <joe.lawrence@stratus.com>
Suggested-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch avoids fuse hangs on sh4 by flushing the cache on
get_user_pages_fast().  This is not necessary a good thing to do, but
get_user_pages() does this, so get_user_pages_fast() should too.

Please note the patch for mips arch that addresses the similar problem:
  https://kernel.googlesource.com/pub/scm/linux/kernel/git/ralf/linux/+/linux-3.4.50%5E!/#F0

They basically simply disable get_user_pages_fast() at all, using a
fall-back to get_user_pages().  But my fix is different, it adds an
explicit cache flushes.
Signed-off-by: NStas Sergeev <stsp@users.sourceforge.net>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When calling epoll_ctl with operation EPOLL_CTL_DEL, structure epds is
not initialized but ep_take_care_of_epollwakeup reads its event field.
When this unintialized field has EPOLLWAKEUP bit set, a capability check
is done for CAP_BLOCK_SUSPEND in ep_take_care_of_epollwakeup.  This
produces unexpected messages in the audit log, such as (on a system
running SELinux):

    type=AVC msg=audit(1408212798.866:410): avc:  denied
    { block_suspend } for  pid=7754 comm="dbus-daemon" capability=36
    scontext=unconfined_u:unconfined_r:unconfined_t
    tcontext=unconfined_u:unconfined_r:unconfined_t
    tclass=capability2 permissive=1

    type=SYSCALL msg=audit(1408212798.866:410): arch=c000003e syscall=233
    success=yes exit=0 a0=3 a1=2 a2=9 a3=7fffd4d66ec0 items=0 ppid=1
    pid=7754 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0
    fsgid=0 tty=(none) ses=3 comm="dbus-daemon"
    exe="/usr/bin/dbus-daemon"
    subj=unconfined_u:unconfined_r:unconfined_t key=(null)

("arch=c000003e syscall=233 a1=2" means "epoll_ctl(op=EPOLL_CTL_DEL)")

Remove use of epds in epoll_ctl when op == EPOLL_CTL_DEL.

Fixes: 4d7e30d9 ("epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready")
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We shouldn't set text_len in the code path that detects printk recursion
because text_len corresponds to the length of the string inside textbuf.
A few lines down from the line

    text_len = strlen(recursion_msg);

is the line

    text_len += vscnprintf(text + text_len, ...);

So if printk detects recursion, it sets text_len to 29 (the length of
recursion_msg) and logs an error.  Then the message supplied by the
caller of printk is stored inside textbuf but offset by 29 bytes.  This
means that the output of the recursive call to printk will contain 29
bytes of garbage in front of it.

This defect is caused by commit 458df9fd ("printk: remove separate
printk_sched buffers and use printk buf instead") which turned the line

    text_len = vscnprintf(text, ...);

into

    text_len += vscnprintf(text + text_len, ...);

To fix this, this patch avoids setting text_len when logging the printk
recursion error.  This patch also marks unlikely() the branch leading up
to this code.

Fixes: 458df9fd ("printk: remove separate printk_sched buffers and use printk buf instead")
Signed-off-by: NPatrick Palka <patrick@parcs.ath.cx>
Reviewed-by: NPetr Mladek <pmladek@suse.cz>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Let memblock skip the hotpluggable memory regions in __next_mem_range(),
it is used to to prevent memblock from allocating hotpluggable memory
for the kernel at early time. The code is the same as __next_mem_range_rev().

Clear hotpluggable flag before releasing free pages to the buddy
allocator.  If we don't clear hotpluggable flag in
free_low_memory_core_early(), the memory which marked hotpluggable flag
will not free to buddy allocator.  Because __next_mem_range() will skip
them.

free_low_memory_core_early
	for_each_free_mem_range
		for_each_mem_range
			__next_mem_range

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NXishi Qiu <qiuxishi@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull arch/microblaze fixes from Michal Simek:
 - Kconfig menu structure fix
 - fix number of syscalls
 - fix compilation warnings from allmodconfig

* tag 'microblaze-3.17-rc5' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix number of syscalls
  microblaze: Rename Advance setup to Kernel features
  microblaze: Add mm/Kconfig to advance menu
  arch/microblaze/include/asm/uaccess.h: Use pr_devel() instead of pr_debug()
  arch/microblaze/include/asm/entry.h: Include "linux/linkage.h" to avoid compiling issue

Number of syscalls have to be updated too.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

"Advance setup: menu is misleading that's why rename it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

mm/Kconfig is getting too big to be in root menu.
Move it to submenu.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

When DYNAMIC_DEBUG enabled, pr_debug() depends on KBUILD_MODNAME which
also depends on the modules number in Makefile. The related information
in "scripts/Makefile.lib" line 94:

  # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
  # end up in (or would, if it gets compiled in)
  # Note: Files that end up in two or more modules are compiled without the
  #       KBUILD_MODNAME definition. The reason is that any made-up name would
  #       differ in different configs.

For this case, 'radio-si470x-i2c.o' and 'radio-si470x-common.o' are in
one line, so cause compiling issue. And 'uaccess.h' is a common shared
header (not specially for drivers), so use pr_devel() instead of is OK.

The related error with allmodconfig:

    CC [M]  drivers/media/radio/si470x/radio-si470x-i2c.o
    CC [M]  drivers/media/radio/si470x/radio-si470x-common.o
  In file included from include/linux/printk.h:257:0,
                   from include/linux/kernel.h:13,
                   from drivers/media/radio/si470x/radio-si470x.h:29,
                   from drivers/media/radio/si470x/radio-si470x-common.c:115:
  ./arch/microblaze/include/asm/uaccess.h: In function 'access_ok':
  include/linux/dynamic_debug.h:66:14: error: 'KBUILD_MODNAME' undeclared (first use in this function)
     .modname = KBUILD_MODNAME,   \
                ^
  include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
    DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
    ^
  include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug'
    dynamic_pr_debug(fmt, ##__VA_ARGS__)
    ^
  ./arch/microblaze/include/asm/uaccess.h:101:3: note: in expansion of macro 'pr_debug'
     pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n",
     ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

"entry.h" needs 'asmlinkage', and "asm/linkage.h" does not provide it.
So need include "linux/linkage.h" to use generic one instead of.

The related error (with allmodconfig under microblaze):

    CC [M]  drivers/net/ethernet/emulex/benet/be_main.o
  In file included from ./arch/microblaze/include/asm/processor.h:17:0,
                   from include/linux/prefetch.h:14,
                   from drivers/net/ethernet/emulex/benet/be_main.c:18:
  ./arch/microblaze/include/asm/entry.h:33:19: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void'
   extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall);
                     ^
Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Pull ext4 bugfix from Ted Ts'o.

[ Hmm.  It's possible we should make kfree() aware of error pointers,
  and use IS_ERR_OR_NULL rather than a NULL check.  But in the meantime
  this is obviously the right fix.  - Linus ]

* 'for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid trying to kfree an ERR_PTR pointer

Pull nfsd bugfixes from Bruce Fields:
 "A couple minor nfsd bugfixes"

* 'for-3.17' of git://linux-nfs.org/~bfields/linux:
  lockd: fix rpcbind crash on lockd startup failure
  nfsd4: fix rd_dircount enforcement

Nikita Yuschenko reported that booting a kernel with init=/bin/sh and
then nfs mounting without portmap or rpcbind running using a busybox
mount resulted in:

  # mount -t nfs 10.30.130.21:/opt /mnt
  svc: failed to register lockdv1 RPC service (errno 111).
  lockd_up: makesock failed, error=-111
  Unable to handle kernel paging request for data at address 0x00000030
  Faulting instruction address: 0xc055e65c
  Oops: Kernel access of bad area, sig: 11 [#1]
  MPC85xx CDS
  Modules linked in:
  CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117
  task: cf29cea0 ti: cf35c000 task.ti: cf35c000
  NIP: c055e65c LR: c0566490 CTR: c055e648
  REGS: cf35dad0 TRAP: 0300   Not tainted  (3.10.44.cge)
  MSR: 00029000 <CE,EE,ME>  CR: 22442488  XER: 20000000
  DEAR: 00000030, ESR: 00000000

  GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086
  00000000
  GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000
  10090ae8
  GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000
  bfa46ef0
  GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000
  cf0ded80
  NIP [c055e65c] call_start+0x14/0x34
  LR [c0566490] __rpc_execute+0x70/0x250
  Call Trace:
  [cf35db80] [00000080] 0x80 (unreliable)
  [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4
  [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8
  [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84
  [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c
  [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108
  [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30
  [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0
  [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8
  [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec
  [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4
  [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44
  [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4
  [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8
  [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc
  [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104
  [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0
  [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0
  [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c

The addition of svc_shutdown_net() resulted in two calls to
svc_rpcb_cleanup(); the second is no longer necessary and crashes when
it calls rpcb_register_call with clnt=NULL.
Reported-by: NNikita Yushchenko <nyushchenko@dev.rtsoft.ru>
Fixes: 679b033d "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up"
Cc: stable@vger.kernel.org
Acked-by: NJeff Layton <jlayton@primarydata.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Commit 3b299709 "nfsd4: enforce rd_dircount" totally misunderstood
rd_dircount; it refers to total non-attribute bytes returned, not number
of directory entries returned.

Bring the code into agreement with RFC 3530 section 14.2.24.

Cc: stable@vger.kernel.org
Fixes: 3b299709 "nfsd4: enforce rd_dircount"
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Pull s390 fixes from Martin Schwidefsky:
 "A bug fix for the vdso code, the loadparm for booting from SCSI is
  added and the access permissions for the dasd module parameters are
  corrected"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vdso: remove NULL pointer check from clock_gettime
  s390/ipl: Add missing SCSI loadparm attributes to /sys/firmware
  s390/dasd: Make module parameter visible in sysfs

Pull cgroup fixes from Tejun Heo:
 "This pull request includes Alban's patch to disallow '\n' in cgroup
  names.

  Two other patches from Li to fix a possible oops when cgroup
  destruction races against other file operations and one from Vivek to
  fix a unified hierarchy devel behavior"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: check cgroup liveliness before unbreaking kernfs
  cgroup: delay the clearing of cgrp->kn->priv
  cgroup: Display legacy cgroup files on default hierarchy
  cgroup: reject cgroup names with '\n'

Pull percpu fixes from Tejun Heo:
 "One patch to fix a failure path in the alloc path.  The bug is
  dangerous but probably not too likely to actually trigger in the wild
  given that there hasn't been any report yet.

  The other two are low impact fixes"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: free percpu allocation info for uniprocessor system
  percpu: perform tlb flush after pcpu_map_pages() failure
  percpu: fix pcpu_alloc_pages() failure path

Pull libata fixes from Tejun Heo:
 "Two patches are to add PCI IDs for ICH9 and all others are device
  specific fixes.  Nothing too interesting"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci_xgene: Fix the link down in first attempt for the APM X-Gene SoC AHCI SATA host controller driver.
  ahci_xgene: Skip the PHY and clock initialization if already configured by the firmware.
  ahci: add pcid for Marvel 0x9182 controller
  ata: Disabling the async PM for JMicron chip 363/361
  ata_piix: Add Device IDs for Intel 9 Series PCH
  ahci: Add Device IDs for Intel 9 Series PCH
  ata: ahci_tegra: Read calibration fuse

Pull networking fixes from David Miller:

 1) Fix skb leak in mac802154, from Martin Townsend

 2) Use select not depends on NF_NAT for NFT_NAT, from Pablo Neira
    Ayuso

 3) Fix union initializer bogosity in vxlan, from Gerhard Stenzel

 4) Fix RX checksum configuration in stmmac driver, from Giuseppe
    CAVALLARO

 5) Fix TSO with non-accelerated VLANs in e1000, e1000e, bna, ehea,
    i40e, i40evf, mvneta, and qlge, from Vlad Yasevich

 6) Fix capability checks in phy_init_eee(), from Giuseppe CAVALLARO

 7) Try high order allocations more sanely for SKBs, specifically if a
    high order allocation fails, fall back directly to zero order pages
    rather than iterating down one order at a time.  From Eric Dumazet

 8) Fix a memory leak in openvswitch, from Li RongQing

 9) amd-xgbe initializes wrong spinlock, from Thomas Lendacky

10) RTNL locking was busted in setsockopt for anycast and multicast, fix
    from Sabrina Dubroca

11) Fix peer address refcount leak in ipv6, from Nicolas Dichtel

12) DocBook typo fixes, from Masanari Iida

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
  ipv6: restore the behavior of ipv6_sock_ac_drop()
  amd-xgbe: Enable interrupts for all management counters
  amd-xgbe: Treat certain counter registers as 64 bit
  greth: moved TX ring cleaning to NAPI rx poll func
  cnic : Cleanup CONFIG_IPV6 & VLAN check
  net: treewide: Fix typo found in DocBook/networking.xml
  bnx2x: Fix link problems for 1G SFP RJ45 module
  3c59x: avoid panic in boomerang_start_xmit when finding page address:
  netfilter: add explicit Kconfig for NETFILTER_XT_NAT
  ipv6: use addrconf_get_prefix_route() to remove peer addr
  ipv6: fix a refcnt leak with peer addr
  net-timestamp: only report sw timestamp if reporting bit is set
  drivers/net/fddi/skfp/h/skfbi.h: Remove useless PCI_BASE_2ND macros
  l2tp: fix race while getting PMTU on PPP pseudo-wire
  ipv6: fix rtnl locking in setsockopt for anycast and multicast
  VMXNET3: Check for map error in vmxnet3_set_mc
  openvswitch: distinguish between the dropped and consumed skb
  amd-xgbe: Fix initialization of the wrong spin lock
  openvswitch: fix a memory leak
  netfilter: fix missing dependencies in NETFILTER_XT_TARGET_LOG
  ...

John W. Linville says:

====================
pull request: wireless 2014-09-05

Please pull this batch of fixes intended for the 3.17 stream...

For the mac80211 bits, Johannes says:

"Here are a few fixes for mac80211. One has been discussed for a while
and adds a terminating NUL-byte to the alpha2 sent to userspace, which
shouldn't be necessary but since many places treat it as a string we
couldn't move to just sending two bytes.

In addition to that, we have two VLAN fixes from Felix, a mesh fix, a
fix for the recently introduced RX aggregation offload, a revert for
a broken patch (that luckily didn't really cause any harm) and a small
fix for alignment in debugfs."

For the iwlwifi bits, Emmanuel says:

"I revert a patch that disabled CTS to self in dvm because users
reported issues. The revert is CCed to stable since the offending
patch was sent to stable too. I also bump the firmware API versions
since a new firmware is coming up. On top of that, Marcel fixes a
bug I introduced while fixing a bug in our Kconfig file."

Please let me know if there are problems!
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is possible that the interface is already gone after joining
the list of anycast on this interface as we don't hold a refcount
for the device, in this case we are safe to ignore the error.

What's more important, for API compatibility we should not
change this behavior for applications even if it were correct.

Fixes: commit a9ed4a29 ("ipv6: fix rtnl locking in setsockopt for anycast and multicast")
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

new link for - How to piss off a Linux kernel subsystem maintainer
Signed-off-by: NSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The NFS/RDMA Kconfig symbol was split into separate options for client
and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig
options for NFSoRDMA client and server support").

Update the documentation to reflect this split.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: "J. Bruce Fields" <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hpfall.c was renamed to freefall.c in 3.16, but this file still refer to
hpfall.c instead of freefall.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The example code provided with the i2c device interface documentation
won't compile since it uses the reserved word "register" to name a
variable.

The compiler fails with this error message:

 error: expected identifier or '(' before '=' token
   __u8 register = 0x20; /* Device register to access */
                 ^

Rename the variable "register" to simply "reg" in the example code.

Another couple of typos has been fixed as well.
[Change "! =" to "!=".]
Signed-off-by: NJose Alarcon Roldan <jose.alarcon.roldan@gmail.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Despite the fact that these functions have been around for years, they
are little used (only 15 uses in 13 files at the preseht time) even
though many other files use work-arounds to achieve the same result.

By documenting them, hopefully they will become more widely used.
Signed-off-by: NRob Jones <rob.jones@codethink.co.uk>
Acked-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are regression fixes (ACPI sysfs, ACPI video, suspend test),
  ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD
  output, a fix and a new CPU ID for the RAPL driver, new blacklist
  entry for the ACPI EC driver and a couple of trivial cleanups
  (intel_pstate and generic PM domains).

  Specifics:

   - Fix for recently broken test_suspend= command line argument (Rafael
     Wysocki).

   - Fixes for regressions related to the ACPI video driver caused by
     switching the default to native backlight handling in 3.16 from
     Hans de Goede.

   - Fix for a sysfs attribute of ACPI device objects that returns stale
     values sometimes due to the fact that they are cached instead of
     executing the appropriate method (_SUN) every time (broken in
     3.14).  From Yasuaki Ishimatsu.

   - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the
     ACPI processor driver from Jiri Kosina.

   - Runtime output validation for the ACPI _DSD device configuration
     object missing from the support for it that has been introduced
     recently.  From Mika Westerberg.

   - Fix for an unuseful and misleading RAPL (Running Average Power
     Limit) domain detection message in the RAPL driver from Jacob Pan.

   - New Intel Haswell CPU ID for the RAPL driver from Jason Baron.

   - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan
     Tianyu.

   - Cleanup for the intel_pstate driver and the core generic PM domains
     code from Gabriele Mazzotta and Geert Uytterhoeven"

* tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock
  ACPI / scan: not cache _SUN value in struct acpi_device_pnp
  cpufreq: intel_pstate: Remove unneeded variable
  powercap / RAPL: change domain detection message
  powercap / RAPL: add support for CPU model 0x3f
  PM / domains: Make generic_pm_domain.name const
  PM / sleep: Fix test_suspend= command line option
  ACPI / EC: Add msi quirk for Clevo W350etq
  ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC
  ACPI / video: Add a disable_native_backlight quirk
  ACPI / video: Fix use_native_backlight selection logic
  ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.

Pull filesystem fixes from Al Viro:
 "Several bugfixes (all of them -stable fodder).

  Alexey's one deals with double mutex_lock() in UFS (apparently, nobody
  has tried to test "ufs: sb mutex merge + mutex_destroy" on something
  like file creation/removal on ufs).  Mine deal with two kinds of
  umount bugs, in umount propagation and in handling of automounted
  submounts, both resulting in bogus transient EBUSY from umount"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix deadlocks introduced by sb mutex merge
  fix EBUSY on umount() from MNT_SHRINKABLE
  get rid of propagate_umount() mistakenly treating slaves as busy.

Pull RCU fix from Ingo Molnar:
 "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y
  && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Make nocb leader kthreads process pending callbacks after spawning

Pull timer fixes from Thomas Gleixner:
 "Three fixlets from the timer departement:

   - Update the timekeeper before updating vsyscall and pvclock.  This
     fixes the kvm-clock regression reported by Chris and Paolo.

   - Use the proper irq work interface from NMI.  This fixes the
     regression reported by Catalin and Dave.

   - Clarify the compat_nanosleep error handling mechanism to avoid
     future confusion"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Update timekeeper before updating vsyscall and pvclock
  compat: nanosleep: Clarify error handling
  nohz: Restore NMI safe local irq work for local nohz kick

Commit 0244756e ("ufs: sb mutex merge + mutex_destroy") introduces
deadlocks in ufs_new_inode() and ufs_free_inode().
Most callers of that functions acqure the mutex by themselves and
ufs_{new,free}_inode() do that via lock_ufs(),
i.e we have an unavoidable double lock.

The patch proposes to resolve the issue by making sure that
ufs_{new,free}_inode() are not called with the mutex held.

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org # 3.16
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull kvm fixes from Paolo Bonzini:
 "A smattering of bug fixes across most architectures"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  powerpc/kvm/cma: Fix panic introduces by signed shift operation
  KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags
  KVM: s390/mm: Fix storage key corruption during swapping
  arm/arm64: KVM: Complete WFI/WFE instructions
  ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU
  KVM: s390/mm: try a cow on read only pages for key ops
  KVM: s390: Fix user triggerable bug in dead code

Pull ARM SoC fixes from Kevin Hilman:
 "Another round of fixes from arm-soc land, which are mostly DT fixes
  for:

   - OMAP: handful of DT fixes devices on newly supported hardware
   - davinci: fix 2nd EDMA channel
   - ux500: extend previous pinctrl fix to another board
   - at91: clock registration fixes, compatibility string precision

  And one more fix for event cleanup in drivers/bus/arm-ccn"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  bus: arm-ccn: Move event cleanup routine
  ARM: at91/dt: rm9200: fix usb clock definition
  ARM: at91: rm9200: fix clock registration
  ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver
  ARM: dts: dra7-evm: Add vtt regulator support
  ARM: dts: dra7-evm: Fix spi1 mux documentation
  ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
  ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am4372: fix USB regs size
  ARM: dts: am437x-gp: switch i2c0 to 100KHz
  ARM: dts: dra7-evm: Fix 8th NAND partition's name
  ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
  ARM: ux500: disable msp2 node on Snowball
  ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC
  ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock

Pull xfs fixes from Dave Chinner:
 "The fixes all address recently discovered data corruption issues.

  The original Direct IO issue was discovered by Chris Mason @ Facebook
  on a production workload which mixed buffered reads with direct reads
  and writes IO to the same file.  The fix for that exposed other issues
  with page invalidation (exposed by millions of fsx operations) failing
  due to dirty buffers beyond EOF.

  Finally, the collapse_range code could also cause problems due to
  racing writeback changing the extent map while it was being shifted
  around.  The commits for that problem are simple mitigation fixes that
  prevent the problem from occuring.  A more robust fix for 3.18 that
  addresses the underlying problem is currently being worked on by
  Brian.

  Summary of fixes:
   - a direct IO read/buffered read data corruption
   - the associated fallout from the DIO data corruption fix
   - collapse range bugs that are potential data corruption issues"

* tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: trim eofblocks before collapse range
  xfs: xfs_file_collapse_range is delalloc challenged
  xfs: don't log inode unless extent shift makes extent modifications
  xfs: use ranged writeback and invalidation for direct IO
  xfs: don't zero partial page cache pages during O_DIRECT writes
  xfs: don't zero partial page cache pages during O_DIRECT writes
  xfs: don't dirty buffers beyond EOF

Pull mtd fixes from Brian Norris:
 "Two trivial MTD updates for 3.17-rc4:

   - a tiny comment tweak, to kill a bunch of DocBook warnings added
     during the merge window

   - a small fixup to the OTP routines' error handling"

* tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd:
  mtd: nand: fix DocBook warnings on nand_sdr_timings doc
  mtd: cfi_cmdset_0002: check return code for get_chip()

The update_walltime() code works on the shadow timekeeper to make the
seqcount protected region as short as possible. But that update to the
shadow timekeeper does not update all timekeeper fields because it's
sufficient to do that once before it becomes life. One of these fields
is tkr.base_mono. That stays stale in the shadow timekeeper unless an
operation happens which copies the real timekeeper to the shadow.

The update function is called after the update calls to vsyscall and
pvclock. While not correct, it did not cause any problems because none
of the invoked update functions used base_mono.

commit cbcf2dd3 (x86: kvm: Make kvm_get_time_and_clockread()
nanoseconds based) changed that in the kvm pvclock update function, so
the stale mono_base value got used and caused kvm-clock to malfunction.

Put the update where it belongs and fix the issue.
Reported-by: NChris J Arges <chris.j.arges@canonical.com>
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409050000570.3333@nanosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The error handling in compat_sys_nanosleep() is correct, but
completely non obvious. Document it and restrict it to the
-ERESTART_RESTARTBLOCK return value for clarity.
Reported-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>