- Replace ASC_ASSERT() with BUG_ON().
   In a few places, get rid of the assertion altogether -- the ensuing
   crash will tell us all we need to know.  Use BUG() where it fits better
   than BUG_ON().  Also fix a fencepost error in advansys_proc_info().
 - Replace DvcSleepMilliSecond with mdelay.
   Despite its name using 'sleep', the implementation was a delay.
   I've marked some places with XXX where we should probably be using
   msleep instead.  They need to be audited to be sure we can sleep in
   that context.
 - Replace DvcDelayMicroSecond with udelay.
 - Replace DvcDelayNanoSecond with udelay too.
   All callers were multiples of 1000.
 - Remove DvcEnterCritical and DvcLeaveCritical.
   These functions are no-ops, and as the comments said, the spinlock
   protects the critical sections.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

AscExeScsiQueue() has one caller, and it passes the address of a
variable; this cannot ever be NULL.  This is the only place that ever
sets ASCQ_ERR_SCSIQ_NULL_PTR, so delete that error code too, as well as
several other unused ASCQ_ERR codes.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The SCSI midlayer won't send commands greater than ->max_cmd_len.
So the checks on length in asc_build_req and adv_build_req are obsolete
and can be deleted, but also we have to set the max_cmd_len in
advansys_board_found().  Also move the length definitions together, and
write a helpful comment.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Move as much as possible outside the critical section in queuecommand, eg:
 - Set the scsi_done field before acquiring the lock
 - Call asc_scsi_done after dropping the lock

Also remove a comment suggesting we should enable interrupts (now we do)
and do some minor reformatting for readability.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The `active' list was used in the reset handler -- but the midlayer
guarantees that list is empty by the time the reset handler is invoked.
It was also checked in the interrupt routines to be sure that this command
belonged to this board, but we don't need to check that either.  We can
then delete the asc_prt_target_stats() function as it will never print
anything, along with asc_enqueue(), asc_dequeue_list(), asc_rmqueue(),
asc_scsi_done_list(), struct asc_queue, ASC_QUEUE_EMPTY, ASC_TID_ALL,
ASC_FRONT, ASC_BACK, and all the REQ* macros.  Also remove this item from
the todo list.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

 - Move the guts of asc_scsi_done_list() into a new function, asc_scsi_done.
 - Call asc_scsi_done() in asc_isr_callback() and adv_isr_callback().  The
   comment was wrong; scsi_done cannot enable interrupts.
 - All other places which queued an scp on the done list are error paths
   for queuecommand, and so we can just call asc_scsi_done() in queuecommand
   if we receive an error.
 - We no longer need to keep a list of done requests in advansys_interrupt
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The midlayer guarantees it won't call ->queuecommand for a host which
is handling a reset condition.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

If the adapter is busy, return the request to the midlayer rather than
queueing it in the driver.  asc_execute_queue() and asc_dequeue() become
unused, and we don't need to print out stats on the waiting queue any more.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Move the error reporting into AscInitGetConfig, AdvInitGetConfig and
AscInitSetConfig.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

It's just data, so format it to something that looks more visually
appealing (and saves some lines)
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Split AdvLoadMicrocode out of AdvInitAsc3550Driver, AdvInitAsc38C0800Driver
and AdvInitAsc38C1600Driver.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Split AdvBuildCarrierFreelist out of AdvInitAsc3550Driver,
AdvInitAsc38C0800Driver and AdvInitAsc38C1600Driver.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

You can't have two drivers for the same bus type with the same name.
Since ISA and VLB are both isa_drivers, rename the VLB one to advansys_vlb.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Cleanup the whitepace from the entire zfcp driver to prevent
to have those changes in future feature or function patches.
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

alloc_fcdev() calls alloc_netdev() which uses kzalloc to alloc all the
memory together with dev->priv region hence no zeroing of structs inside
struct mpt_lan_priv needed.
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: N"Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The Coverity checker spotted two potential memory leaks in
drivers/message/fusion/mptbase.c::mpt_attach().

There are two returns that may leak the storage allocated for 'ioc'
(sizeof(MPT_ADAPTER) bytes).

A simple fix would be to simply add two kfree() calls before the return
statements, but a better fix (that this patch implements) is to reorder the
code so that if we hit the first return condition we don't have to do the
allocation at all and then just add a kfree() call for the second case.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Acked-by: N"Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This patch does kmalloc + memset conversion to kzalloc anSigned-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
d simplifies mptctl_probe().

 drivers/message/fusion/mptctl.c | 82092 -> 81884 (-208 bytes)
 drivers/message/fusion/mptctl.o | 201784 -> 200648 (-1136 bytes)
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Acked-by: N"Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Acked-by: N"Moore, Eric Dean" <Eric.Moore@lsil.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

srp transport works for target drivers without supported_mode
attribute but it would be better to use it explicitly.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This adds minimum target driver support like the srp transport does:

- fc_remote_port_{rolechg,delete} calls
scsi_tgt_it_nexus_{create,destroy} for target drivers.

- add callbacks to notify target drivers of the nexus and tmf
operation results to fc_function_template.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This adds supported_mode and active_mode attributes to
/sys/class/sys_host/hostX/ for specifying the mode that a lld supports
and the currently activated mode. The output format is similar to fc
rport roles:

luce:/sys/class/scsi_host/host0$ cat supported_mode
Initiator
luce:/sys/class/scsi_host/host0$ cat active_mode
Initiator

The mode values uses bitmap since we would support dual-mode llds in
the future like this:

luce:/sys/class/scsi_host/host0$ cat supported_mode
Initiator, Target

The supported_mode attribute looks at a scsi_host_template and the
active_mode attribute looks at a scsi_host. We would add a hook to a
scsi_host_template to change the active_mode attribute
dynamically. But now there is no hook since no lld supports that
feature.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

should use host->can_queue instead of host->hostt->can_queue.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Add new HBA PCI ID (0x416) for ASC58300 which has eight port SAS and
SATA PCI-X 133MHz low profile host bus adapter with two mini SAS 4x
external connectors.
Signed-off-by: NGilbert Wu <gilbert_wu@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Add the SMC LP, SUN EM and Adaptec 5405 cards to the aacraid
documentation list of supported products. These cards are picked up with
family match, so no associated code changes.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

updated patch based on Jeff Garzik's comments.

- check adapter firmware version and use appropriate interface accordingly
- add new PCI device IDs and use PCI_VDEVICE macro
- update driver version string
- remove unused data structures
- remove unnecessary typecasts
Signed-off-by: NHighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Already register the debug feature before the zfcp adapter is
set online. This allows to use the debug feature to investigate
the online/offline sequence.
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

cleanup, using ERP request mempool for all ERP versions of
the exchange functions (exchange_config (ECD), exchange_port (EPD) )
providing individual versions of the ECD, EPD functions for ERP
and other purposes (_sync).
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

This change has already been discussed on linux-scsi:
http://marc.info/?t=118771096400003
http://marc.info/?t=118760913100005Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Acked-by: NJames Smart <James.Smart@Emulex.Com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Remove braces for only one statement
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

zfcp_adapter_enqueue initialized adapter->ccw_device twice with
the same value. Remove the second assignment, since it is not
necessary.
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Avoid "if (whatever) ;" constructs since they seem to confuse people,
even if there is a comment.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

correct indentation for nested if-else
Signed-off-by: NChristof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: NSwen Schillig <swen@vnet.ibm.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc,
megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is
a reference of LSI Logic, it is changed to LSI in mpt fusion driver
code.
signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
Acked-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

When there is state change in FC links, a message is displayed with
old and new link speed.
signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
Acked-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The data structure definitions from mptsas.c are moved to a new header
file mptsas.h
signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
Acked-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

The call back index requires only u8 but in lot of places it is
referred as int, now everywhere the call back index variables are
declared as u8 with uniform name cb_idx
signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
Acked-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Added support for sending the task management requests through High priority
request FIFO instead of Doorbell writes when firmware support High priority
FIFO.
signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
Acked-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Per request from Matthew Wilcox - using PCI_VENDOR_ATTO.

Add support for ATTO UL4D, they are rebranded 53C1030.
The changes are
1. Adding a new PCI vendor ID in pci table
2. The spi_port_page_2 is in different format than that of LSI generic
spi_port_page_2 and hence mapping code is added.
signed-off-by: NSathya Prakash <sathya.prakash@lsi.com>
signed-off-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

A new PCI_VENDOR_ID for pci_ids.h.
signed-off-by: NEric Moore <Eric.Moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>