- 13 4月, 2018 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fixes from Steven Rostedt: "A few clean ups and bug fixes: - replace open coded "ARRAY_SIZE()" with macro - updates to uprobes - bug fix for perf event filter on error path" * tag 'trace-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Enforce passing in filter=NULL to create_filter() trace_uprobe: Simplify probes_seq_show() trace_uprobe: Use %lx to display offset tracing/uprobe: Add support for overlayfs tracing: Use ARRAY_SIZE() macro instead of open coding it
-
由 Alexey Dobriyan 提交于
Add copyright in two files before they get autorubberstamped. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: - mark Extended Tags as broken on Broadcom HT1100 and HT2000 Root Ports to fix drm/Xorg hangs and unresponsive keyboards (Sinan Kaya) - remove useless messages during resource reassignment (Desnes A. Nunes do Rosario) * tag 'pci-v4.17-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Remove messages about reassigning resources PCI: Mark Broadcom HT1100 and HT2000 Root Port Extended Tags as broken
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: - fix panic when halting system via "shutdown -h now" - drop own coding in favour of generic CONFIG_COMPAT_BINFMT_ELF implementation - add FPE_CONDTRAP constant: last outstanding parisc-specific cleanup for Eric Biedermans siginfo patches - move some functions to .init and some to .text.hot linker sections * 'parisc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent panic at system halt parisc: Switch to generic COMPAT_BINFMT_ELF parisc: Move cache flush functions into .text.hot section parisc/signal: Add FPE_CONDTRAP for conditional trap handling
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull more xfs updates from Darrick Wong: "Most of these are code cleanups, but there are a couple of notable use-after-free bug fixes. This series has been run through a full xfstests run over the week and through a quick xfstests run against this morning's master, with no major failures reported. - clean up unnecessary function call parameters - fix a use-after-free bug when aborting logging intents - refactor filestreams state data to avoid use-after-free bug - fix incorrect removal of cow extents when truncating extended attributes. - refactor open-coded __set_page_dirty in favor of using vfs function. - fix a deadlock when fstrim and fs shutdown race" * tag 'xfs-4.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: Force log to disk before reading the AGF during a fstrim Export __set_page_dirty xfs: only cancel cow blocks when truncating the data fork xfs: non-scrub - remove unused function parameters xfs: remove filestream item xfs_inode reference xfs: fix intent use-after-free on abort xfs: Remove "committed" argument of xfs_dir_ialloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2由 Linus Torvalds 提交于
Pull more gfs2 updates from Bob Peterson: "We decided to request the latest three patches to be merged into this merge window while it's still open. - The first patch adds a new function to lockref: lockref_put_not_zero - The second patch fixes GFS2's glock dump code so it uses the new lockref function. This fixes a problem whereby lock dumps could miss glocks. - I made a minor patch to update some comments and fix the lock ordering text in our gfs2-glocks.txt Documentation file" * tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: GFS2: Minor improvements to comments and documentation gfs2: Stop using rhashtable_walk_peek lockref: Add lockref_put_not_zero
-
git://git.linux-nfs.org/projects/anna/linux-nfs由 Linus Torvalds 提交于
Pull NFS client updates from Anna Schumaker: "Stable bugfixes: - xprtrdma: Fix corner cases when handling device removal # v4.12+ - xprtrdma: Fix latency regression on NUMA NFS/RDMA clients # v4.15+ Features: - New sunrpc tracepoint for RPC pings - Finer grained NFSv4 attribute checking - Don't unnecessarily return NFS v4 delegations Other bugfixes and cleanups: - Several other small NFSoRDMA cleanups - Improvements to the sunrpc RTT measurements - A few sunrpc tracepoint cleanups - Various fixes for NFS v4 lock notifications - Various sunrpc and NFS v4 XDR encoding cleanups - Switch to the ida_simple API - Fix NFSv4.1 exclusive create - Forget acl cache after setattr operation - Don't advance the nfs_entry readdir cookie if xdr decoding fails" * tag 'nfs-for-4.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (47 commits) NFS: advance nfs_entry cookie only after decoding completes successfully NFSv3/acl: forget acl cache after setattr NFSv4.1: Fix exclusive create NFSv4: Declare the size up to date after it was set. nfs: Use ida_simple API NFSv4: Fix the nfs_inode_set_delegation() arguments NFSv4: Clean up CB_GETATTR encoding NFSv4: Don't ask for attributes when ACCESS is protected by a delegation NFSv4: Add a helper to encode/decode struct timespec NFSv4: Clean up encode_attrs NFSv4; Clean up XDR encoding of type bitmap4 NFSv4: Allow GFP_NOIO sleeps in decode_attr_owner/decode_attr_group SUNRPC: Add a helper for encoding opaque data inline SUNRPC: Add helpers for decoding opaque and string types NFSv4: Ignore change attribute invalidations if we hold a delegation NFS: More fine grained attribute tracking NFS: Don't force unnecessary cache invalidation in nfs_update_inode() NFS: Don't redirty the attribute cache in nfs_wcc_update_inode() NFS: Don't force a revalidation of all attributes if change is missing NFS: Convert NFS_INO_INVALID flags to unsigned long ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs thaw updates from Al Viro: "An ancient series that has fallen through the cracks in the previous cycle" * 'work.thaw' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: buffer.c: call thaw_super during emergency thaw vfs: factor sb iteration out of do_emergency_remount
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull AFS updates from Al Viro: "The AFS series posted by dhowells depended upon lookup_one_len() rework; now that prereq is in the mainline, that series had been rebased on top of it and got some exposure and testing..." * 'afs-dh' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Do better accretion of small writes on newly created content afs: Add stats for data transfer operations afs: Trace protocol errors afs: Locally edit directory data for mkdir/create/unlink/... afs: Adjust the directory XDR structures afs: Split the directory content defs into a header afs: Fix directory handling afs: Split the dynroot stuff out and give it its own ops tables afs: Keep track of invalid-before version for dentry coherency afs: Rearrange status mapping afs: Make it possible to get the data version in readpage afs: Init inode before accessing cache afs: Introduce a statistics proc file afs: Dump bad status record afs: Implement @cell substitution handling afs: Implement @sys substitution handling afs: Prospectively look up extra files when doing a single lookup afs: Don't over-increment the cell usage count when pinning it afs: Fix checker warnings vfs: Remove the const from dir_context::actor
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) In ip_gre tunnel, handle the conflict between TUNNEL_{SEQ,CSUM} and GSO/LLTX properly. From Sabrina Dubroca. 2) Stop properly on error in lan78xx_read_otp(), from Phil Elwell. 3) Don't uncompress in slip before rstate is initialized, from Tejaswi Tanikella. 4) When using 1.x firmware on aquantia, issue a deinit before we hardware reset the chip, otherwise we break dirty wake WOL. From Igor Russkikh. 5) Correct log check in vhost_vq_access_ok(), from Stefan Hajnoczi. 6) Fix ethtool -x crashes in bnxt_en, from Michael Chan. 7) Fix races in l2tp tunnel creation and duplicate tunnel detection, from Guillaume Nault. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (22 commits) l2tp: fix race in duplicate tunnel detection l2tp: fix races in tunnel creation tun: send netlink notification when the device is modified tun: set the flags before registering the netdevice lan78xx: Don't reset the interface on open bnxt_en: Fix NULL pointer dereference at bnxt_free_irq(). bnxt_en: Need to include RDMA rings in bnxt_check_rings(). bnxt_en: Support max-mtu with VF-reps bnxt_en: Ignore src port field in decap filter nodes bnxt_en: do not allow wildcard matches for L2 flows bnxt_en: Fix ethtool -x crash when device is down. vhost: return bool from *_access_ok() functions vhost: fix vhost_vq_access_ok() log check vhost: Fix vhost_copy_to_user() net: aquantia: oops when shutdown on already stopped device net: aquantia: Regression on reset with 1.x firmware cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWAN slip: Check if rstate is initialized before uncompressing lan78xx: Avoid spurious kevent 4 "error" lan78xx: Correctly indicate invalid OTP ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip由 Linus Torvalds 提交于
Pull xen fixes from Juergen Gross: "A few fixes of Xen related core code and drivers" * tag 'for-linus-4.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvh: Indicate XENFEAT_linux_rsdp_unrestricted to Xen xen/acpi: off by one in read_acpi_id() xen/acpi: upload _PSD info for non Dom0 CPUs too x86/xen: Delay get_cpu_cap until stack canary is established xen: xenbus_dev_frontend: Verify body of XS_TRANSACTION_END xen: xenbus: Catch closing of non existent transactions xen: xenbus_dev_frontend: Fix XS_TRANSACTION_END handling
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping fix from Christoph Hellwig: "Fix for one swiotlb regression in 2.16 from Takashi" * tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: fix unexpected swiotlb_alloc_coherent failures
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fixes from Ulf Hansson: "MMC core: - Prevent bus reference leak in mmc_blk_init() MMC host: - tmio: Fix error handling when issuing CMD23 - jz4740: Fix race condition in IRQ mask update" * tag 'mmc-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fix error handling when issuing CMD23 mmc: core: Prevent bus reference leak in mmc_blk_init() mmc: jz4740: Fix race condition in IRQ mask update
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb由 Linus Torvalds 提交于
Pull kdb updates from Jason Wessel: - fix 2032 time access issues and new compiler warnings - minor regression test cleanup - formatting fixes for end user use of kdb * tag 'for_linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kdb: use memmove instead of overlapping memcpy kdb: use ktime_get_mono_fast_ns() instead of ktime_get_ts() kdb: bl: don't use tab character in output kdb: drop newline in unknown command output kdb: make "mdr" command repeat kdb: use __ktime_get_real_seconds instead of __current_kernel_time misc: kgdbts: Display progress of asynchronous tests
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
Pull microblaze updates from Michal Simek: "Use generic pci_mmap_resource_range()" * tag 'microblaze-4.17-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Use generic pci_mmap_resource_range() microblaze: Provide pgprot_device/writecombine macros for nommu
-
由 Bob Peterson 提交于
This patch simply fixes some comments and the gfs2-glocks.txt file: Places where i_rwsem was called i_mutex, and adding i_rw_mutex. Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
Function rhashtable_walk_peek is problematic because there is no guarantee that the glock previously returned still exists; when that key is deleted, rhashtable_walk_peek can end up returning a different key, which will cause an inconsistent glock dump. Fix this by keeping track of the current glock in the seq file iterator functions instead. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
由 Andreas Gruenbacher 提交于
Put a lockref unless the lockref is dead or its count would become zero. This is the same as lockref_put_or_lock except that the lock is never left held. Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com> Signed-off-by: NBob Peterson <rpeterso@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic由 Linus Torvalds 提交于
Pull asm-generic fixes from Arnd Bergmann: "I have one regression fix for a minor build problem after the architecture removal series, plus a rework of the barriers in the readl/writel functions, thanks to work by Sinan Kaya: This started from a discussion on the linuxpcc and rdma mailing lists[1]. To summarize, we decided that architectures are responsible to serialize readl() and writel() accesses on a device MMIO space relative to DMA performed by that device. This series provides a pessimistic implementation of that behavior for asm-generic/io.h, which is in turn used by a number of architectures (h8300, microblaze, nios2, openrisc, s390, sparc, um, unicore32, and xtensa). Some of those presumably need no extra barriers, or something weaker than rmb()/wmb(), and they are advised to override the new default for better performance. For inb()/outb(), the same barriers are used, but architectures might want to add another barrier to outb() here if that can guarantee non-posted behavior (some architectures can, others cannot do that). The readl_relaxed()/writel_relaxed() family of functions retains the existing behavior with no extra barriers" [1] https://lists.ozlabs.org/pipermail/linuxppc-dev/2018-March/170481.html * tag 'asm-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: io: change writeX_relaxed() to remove barriers io: change readX_relaxed() to remove barriers dts: remove cris & metag dts hard link file io: change inX() to have their own IO barrier overrides io: change outX() to have their own IO barrier overrides io: define stronger ordering for the default writeX() implementation io: define stronger ordering for the default readX() implementation io: define several IO & PIO barrier types for the asm-generic version
-
- 12 4月, 2018 21 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull virtio update from Michael Tsirkin: "This adds reporting hugepage stats to virtio-balloon" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: export hugetlb page allocation counts
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU updates from Joerg Roedel: - OF_IOMMU support for the Rockchip iommu driver so that it can use generic DT bindings - rework of locking in the AMD IOMMU interrupt remapping code to make it work better in RT kernels - support for improved iotlb flushing in the AMD IOMMU driver - support for 52-bit physical and virtual addressing in the ARM-SMMU - various other small fixes and cleanups * tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits) iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t iommu/rockchip: Support sharing IOMMU between masters iommu/rockchip: Add runtime PM support iommu/rockchip: Fix error handling in init iommu/rockchip: Use OF_IOMMU to attach devices automatically iommu/rockchip: Use IOMMU device for dma mapping operations dt-bindings: iommu/rockchip: Add clock property iommu/rockchip: Control clocks needed to access the IOMMU iommu/rockchip: Fix TLB flush of secondary IOMMUs iommu/rockchip: Use iopoll helpers to wait for hardware iommu/rockchip: Fix error handling in attach iommu/rockchip: Request irqs in rk_iommu_probe() iommu/rockchip: Fix error handling in probe iommu/rockchip: Prohibit unbind and remove iommu/amd: Return proper error code in irq_remapping_alloc() iommu/amd: Make amd_iommu_devtable_lock a spin_lock iommu/amd: Drop the lock while allocating new irq remap table iommu/amd: Factor out setting the remap table for a devid iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga() iommu/amd: Remove the special case from alloc_irq_table() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull more power management updates from Rafael Wysocki: "These include one big-ticket item which is the rework of the idle loop in order to prevent CPUs from spending too much time in shallow idle states. It reduces idle power on some systems by 10% or more and may improve performance of workloads in which the idle loop overhead matters. This has been in the works for several weeks and it has been tested and reviewed quite thoroughly. Also included are changes that finalize the cpufreq cleanup moving frequency table validation from drivers to the core, a few fixes and cleanups of cpufreq drivers, a cpuidle documentation update and a PM QoS core update to mark the expected switch fall-throughs in it. Specifics: - Rework the idle loop in order to prevent CPUs from spending too much time in shallow idle states by making it stop the scheduler tick before putting the CPU into an idle state only if the idle duration predicted by the idle governor is long enough. That required the code to be reordered to invoke the idle governor before stopping the tick, among other things (Rafael Wysocki, Frederic Weisbecker, Arnd Bergmann). - Add the missing description of the residency sysfs attribute to the cpuidle documentation (Prashanth Prakash). - Finalize the cpufreq cleanup moving frequency table validation from drivers to the core (Viresh Kumar). - Fix a clock leak regression in the armada-37xx cpufreq driver (Gregory Clement). - Fix the initialization of the CPU performance data structures for shared policies in the CPPC cpufreq driver (Shunyong Yang). - Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a bit (Viresh Kumar, Rafael Wysocki). - Mark the expected switch fall-throughs in the PM QoS core (Gustavo Silva)" * tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) tick-sched: avoid a maybe-uninitialized warning cpufreq: Drop cpufreq_table_validate_and_show() cpufreq: SCMI: Don't validate the frequency table twice cpufreq: CPPC: Initialize shared perf capabilities of CPUs cpufreq: armada-37xx: Fix clock leak cpufreq: CPPC: Don't set transition_latency cpufreq: ti-cpufreq: Use builtin_platform_driver() cpufreq: intel_pstate: Do not include debugfs.h PM / QoS: mark expected switch fall-throughs cpuidle: Add definition of residency to sysfs documentation time: hrtimer: Use timerqueue_iterate_next() to get to the next timer nohz: Avoid duplication of code related to got_idle_tick nohz: Gather tick_sched booleans under a common flag field cpuidle: menu: Avoid selecting shallow states with stopped tick cpuidle: menu: Refine idle state selection for running tick sched: idle: Select idle state before stopping the tick time: hrtimer: Introduce hrtimer_next_event_without() time: tick-sched: Split tick_nohz_stop_sched_tick() cpuidle: Return nohz hint from cpuidle_select() jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest由 Linus Torvalds 提交于
Pull ktest updates from Steven Rostedt: "These commits have either been sitting in my INBOX or have been in my local tree for some time. I need to push them upstream: - Separate out config-bisect.pl from ktest.pl. This allows users to do config bisects without full ktest setup. - Email on status change. Allow the user to be emailed on test start, finish, failure, etc. - Other small fixes and enhancements" * tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits) ktest: Take submenu into account for grub2 menus ktest.pl: Add MAIL_COMMAND option to define how to send email ktest.pl: Use run_command to execute sending mail ktest.pl: Allow dodie be recursive ktest.pl: Kill test if mailer is not supported ktest.pl: Add MAIL_PATH option to define where to find the mailer ktest.pl: No need to print no mailer is specified when mailto is not Ktest: add email options to sample.config Ktest: Use dodie for critical falures Ktest: Add SigInt handling Ktest: Add email support ktest.pl: Detect if a config-bisect was interrupted ktest.pl: Make finding config-bisect.pl dynamic ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect ktest.pl: Use diffconfig if available for failed config bisects ktest.pl: Allow for the config-bisect.pl output to display to console ktest: Use config-bisect.pl in ktest.pl ktest: Add standalone config-bisect.pl program ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build ...
-
git://git.infradead.org/linux-ubifs由 Linus Torvalds 提交于
Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull UML updates from Richard Weinberger: - a new and faster epoll based IRQ controller and NIC driver - misc fixes and janitorial updates * git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: Fix vector raw inintialization logic Migrate vector timers to new timer API um: Compile with modern headers um: vector: Fix an error handling path in 'vector_parse()' um: vector: Fix a memory allocation check um: vector: fix missing unlock on error in vector_net_open() um: Add missing EXPORT for free_irq_by_fd() High Performance UML Vector Network Driver Epoll based IRQ controller um: Use POSIX ucontext_t instead of struct ucontext um: time: Use timespec64 for persistent clock um: Restore symbol versions for __memcpy and memcpy
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "Here is a very small set of fixes for inclusion in linux-4.17-rc1: Two changes for the maintainer file, and one more fix for the newly added npcm platform, to enable the level 2 cache controller" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: MAINTAINERS: Update ASPEED entry with details MAINTAINERS: Migrate oxnas list to groups.io arm: npcm: enable L2 cache in NPCM7xx architecture
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2由 Linus Torvalds 提交于
Pull nios2 update from Ley Foon Tan: "Use read_persistent_clock64() instead of read_persistent_clock()" * tag 'nios2-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: Use read_persistent_clock64() instead of read_persistent_clock()
-
由 David S. Miller 提交于
Guillaume Nault says: ==================== l2tp: tunnel creation fixes L2TP tunnel creation is racy. We need to make sure that the tunnel returned by l2tp_tunnel_create() isn't going to be freed while the caller is using it. This is done in patch #1, by separating tunnel creation from tunnel registration. With the tunnel registration code in place, we can now check for duplicate tunnels in a race-free way. This is done in patch #2, which incidentally removes the last use of l2tp_tunnel_find(). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
We can't use l2tp_tunnel_find() to prevent l2tp_nl_cmd_tunnel_create() from creating a duplicate tunnel. A tunnel can be concurrently registered after l2tp_tunnel_find() returns. Therefore, searching for duplicates must be done at registration time. Finally, remove l2tp_tunnel_find() entirely as it isn't use anywhere anymore. Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
l2tp_tunnel_create() inserts the new tunnel into the namespace's tunnel list and sets the socket's ->sk_user_data field, before returning it to the caller. Therefore, there are two ways the tunnel can be accessed and freed, before the caller even had the opportunity to take a reference. In practice, syzbot could crash the module by closing the socket right after a new tunnel was returned to pppol2tp_create(). This patch moves tunnel registration out of l2tp_tunnel_create(), so that the caller can safely hold a reference before publishing the tunnel. This second step is done with the new l2tp_tunnel_register() function, which is now responsible for associating the tunnel to its socket and for inserting it into the namespace's list. While moving the code to l2tp_tunnel_register(), a few modifications have been done. First, the socket validation tests are done in a helper function, for clarity. Also, modifying the socket is now done after having inserted the tunnel to the namespace's tunnels list. This will allow insertion to fail, without having to revert theses modifications in the error path (a followup patch will check for duplicate tunnels before insertion). Either the socket is a kernel socket which we control, or it is a user-space socket for which we have a reference on the file descriptor. In any case, the socket isn't going to be closed from under us. Reported-by: syzbot+fbeeb5c3b538e8545644@syzkaller.appspotmail.com Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Helge Deller 提交于
When issuing a "shutdown -h now", the reboot syscall calls kernel_halt() which shouldn't return, otherwise one gets this panic: reboot: System halted Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000 CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 4.16.0-32bit+ #560 Backtrace: [<1018a694>] show_stack+0x18/0x28 [<106e68a8>] dump_stack+0x80/0x10c [<101a4df8>] panic+0xfc/0x290 [<101a90b8>] do_exit+0x73c/0x914 [<101c7e38>] SyS_reboot+0x190/0x1d4 [<1017e444>] syscall_exit+0x0/0x14 Fix it by letting machine_halt() call machine_power_off() which doesn't return. Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Sabrina Dubroca 提交于
I added dumping of link information about tun devices over netlink in commit 1ec010e7 ("tun: export flags, uid, gid, queue information over netlink"), but didn't add the missing netlink notifications when the device's exported properties change. This patch adds notifications when owner/group or flags are modified, when queues are attached/detached, and when a tun fd is closed. Reported-by: NThomas Haller <thaller@redhat.com> Fixes: 1ec010e7 ("tun: export flags, uid, gid, queue information over netlink") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Otherwise, register_netdevice advertises the creation of the device with the default flags, instead of what the user requested. Reported-by: NThomas Haller <thaller@redhat.com> Fixes: 1ec010e7 ("tun: export flags, uid, gid, queue information over netlink") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Phil Elwell 提交于
Commit 92571a1a ("lan78xx: Connect phy early") moves the PHY initialisation into lan78xx_probe, but lan78xx_open subsequently calls lan78xx_reset. As well as forcing a second round of link negotiation, this reset frequently prevents the phy interrupt from being generated (even though the link is up), rendering the interface unusable. Fix this issue by removing the lan78xx_reset call from lan78xx_open. Fixes: 92571a1a ("lan78xx: Connect phy early") Signed-off-by: NPhil Elwell <phil@raspberrypi.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Michael Chan says: ==================== bnxt_en: Fixes for net. This bug fix series include NULL pointer fixes in ethtool -x code path and in the error clean up path when freeing IRQs, a ring accounting bug that missed rings used by the RDMA driver, and 3 bug fixes related to TC Flower and VF-reps. v2: Fixed commit message of patch 4. Changed the pound sign to $ sign in front of the ip command. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
When open fails during ethtool -L ring change, for example, the driver may crash at bnxt_free_irq() because bp->bnapi is NULL. If we fail to allocate all the new rings, bnxt_open_nic() will free all the memory including bp->bnapi. Subsequent call to bnxt_close_nic() will try to dereference bp->bnapi in bnxt_free_irq(). Fix it by checking for !bp->bnapi in bnxt_free_irq(). Fixes: e5811b8c ("bnxt_en: Add IRQ remapping logic.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
With recent changes to reserve both L2 and RDMA rings, we need to include the RDMA rings in bnxt_check_rings(). Otherwise we will under-estimate the rings we need during ethtool -L and may lead to failure. Fixes: fbcfc8e4 ("bnxt_en: Reserve completion rings and MSIX for bnxt_re RDMA driver.") Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sriharsha Basavapatna 提交于
While a VF is configured with a bigger mtu (> 1500), any packets that are punted to the VF-rep (slow-path) get dropped by OVS kernel-datapath with the following message: "dropped over-mtu packet". Fix this by returning the max-mtu value for a VF-rep derived from its corresponding VF. VF-rep's mtu can be changed using 'ip' command as shown in this example: $ ip link set bnxt0_pf0vf0 mtu 9000 Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sriharsha Basavapatna 提交于
The driver currently uses src port field (along with other fields) in the decap tunnel key, while looking up and adding tunnel nodes. This leads to redundant cfa_decap_filter_alloc() requests to the FW and flow-miss in the flow engine. Fix this by ignoring the src port field in decap tunnel nodes. Fixes: f484f678 ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter") Signed-off-by: NSriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Gospodarek 提交于
Before this patch the following commands would succeed as far as the user was concerned: $ tc qdisc add dev p1p1 ingress $ tc filter add dev p1p1 parent ffff: protocol all \ flower skip_sw action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:01/44 action drop The current flow offload infrastructure used does not support wildcard matching for ethernet headers, so do not allow the second or third commands to succeed. If a user wants to drop traffic on that interface the protocol and MAC addresses need to be specified explicitly: $ tc qdisc add dev p1p1 ingress $ tc filter add dev p1p1 parent ffff: protocol arp \ flower skip_sw action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw action drop ... $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:01 action drop $ tc filter add dev p1p1 parent ffff: protocol ipv4 \ flower skip_sw src_mac 00:02:00:00:00:02 action drop ... There are also checks for VLAN parameters in this patch as other callers may wildcard those parameters even if tc does not. Using different flow infrastructure could allow this to work in the future for L2 flows, but for now it does not. Fixes: 2ae7408f ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: NAndy Gospodarek <gospo@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-