- 29 1月, 2008 8 次提交
-
-
由 Tomas Winkler 提交于
This patch renames restricted_mem suffix with more proper name targ_mem for function accessing memory on the nic in target mode Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames restricted_reg suffix with more proper name prhp for function accessing registers on the periphery bus. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ian Schram 提交于
These pieces of code appear to be useless. The BUG_ON is also performed in iwl_send_cmd_async. Serious karma would be needed to enter iwl_ativate_qos with a null priv. I had a deja vu when patching this, but for the life of me I couldn't track down a similar patch. Signed-off-by: NIan Schram <ischram@telenet.be> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ian Schram 提交于
Moving code around, lindent, and whatnot created several places where there appeared to be an 75 column "rule" instead of 80. This patch removes those that I can spot, hopefully increasing readability. Signed-off-by: NIan Schram <ischram@telenet.be> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch remove cck_flag from iwl_driver_hw_info, this flag is unused after spliting the iwl-base.c Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames queue pointers to write_ptr and read_ptr instead of first_empty and last_used. This is closer to technical terminology we everyday use Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ian Schram 提交于
Correct the spelling of aqcuire. Signed-off-by: NIan Schram <ischram@telenet.be> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ian Schram 提交于
Fixing various spelling errors and typos. Mostly in comments. In total 27 words were corrected, some of which occurred more than ones. Signed-Of-By: NIan Schram <ischram@telenet.be> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 1月, 2008 1 次提交
-
-
由 Reinette Chatre 提交于
This fixes a NULL pointer dereference that can occur when the ucode is not loaded at the time __iwl_up is called. The problem was reported at http://kerneloops.org/raw.php?rawid=2765&msgid=Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 20 12月, 2007 1 次提交
-
-
由 Zhu Yi 提交于
This patch moves _cancel_deferred_work out of mutex protection and removes unnecessary mutex in pci_suspend and pci_resume. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 18 12月, 2007 2 次提交
-
-
由 Zhu Yi 提交于
The patch fixes the STATUS_RF_KILL_HW state is not cleared problem if the device goes to suspend when the rf_kill switch is enabled. The bug causes the driver always thinks the rf_kill switch is enabled (although it is disabled) after resume. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Cyrill Gorcunov 提交于
Fix rate control algo reference leak in case if network device has been failed to register. In this case special flag priv->mac80211_registered is not set and the rate algo reference is not freeing on module unload. That leads to OOPs in further ieee80211 rate register/unregister procedure (by any callee). It should fix the bug #9470 http://bugzilla.kernel.org/show_bug.cgi?id=9470 [akpm@linux-foundation.org: build fix] Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Acked-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 30 11月, 2007 3 次提交
-
-
由 Joonwoo Park 提交于
Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch fixes iwl_mac_add_interface. 1. Currently only one interface is supported, instead of silently retuning 0 now it returns -EOPNOTSUPP (By Johannes Berg) 2. It enables changing mac address from user space (By Ian Schram) Signed-off-by: NTomas Winkler <tomas@localhost.localdomain> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: linux-wireless <linux-wireless@vger.kernel.org Cc: Ian Schram <ischram@telenet.be> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Saleem Abdulrasool 提交于
Signed-off-by: NSaleem Abdulrasool <compnerd@compnerd.org> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 15 11月, 2007 1 次提交
-
-
由 Mohamed Abbas 提交于
The patch fixes association failure (reason = 18) bug by arranging CCK rates before OFDM rates. This patch will register with mac80211 the modified rate arrangement with CCK rate first. Change rate scale algorithm also to deal with rate change. Fix Txpower and rate Table commands to be constructed correctly after rearrangement. Signed-off-by: NMohamed Abbas <mabbas@linux.intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 11月, 2007 1 次提交
-
-
由 Oliver Neukum 提交于
It makes no sense to enable interrupts if a device has been unplugged. In addition if in doubt IRQ_HANDLED should be returned. Signed-off-by: NOliver Neukum <oneukum@suse.de> Acked-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2007 1 次提交
-
-
由 Johannes Berg 提交于
Prior to this patch, iwlwifi would always use the first registered rate control algorithm which, depending on system setup, could be anything. After the mac80211 patch to make the simple algorithm built-in, it would always be simple. This has always been a bug in iwlwifi. This fixes it by requesting that mac80211 selects the right rate control algorithm. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 26 10月, 2007 2 次提交
-
-
由 Mohamed Abbas 提交于
This patch fix the follwing for 3945: 1. Fix direct scan by make sure we set one_direct_scan only when the mac80211 ask for direct scan. 2. Fix mac_stop and mac_remove_interface calles, we make sure we cancel any scan and disassoc on these call Signed-off-by: NMohamed Abbas <mabbas@linux.intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mohamed Abbas 提交于
This patch fixes the following for 3945: 1. Make sure we cancel scan if RXON command is called. 2. Call scan abort on scan watchdog. Signed-off-by: NMohamed Abbas <mabbas@linux.intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 19 10月, 2007 2 次提交
-
-
由 Tomas Winkler 提交于
This patch fixes setting of rates in probe request used in HW scan. The bug was reported by Helmut Schaa <hschaa@suse.de> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
This patch removes all double includes of the same file. This makes scripts/checkincludes.pl happy. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 10月, 2007 10 次提交
-
-
由 Johannes Berg 提交于
This "algorithm" is used only internally and is not useful. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Michael Buesch <mb@bu3sch.de> Acked-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhu Yi 提交于
Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
There were a few Firmware errors reported the most reproducible http://bughost.org/bugzilla/show_bug.cgi?id=1471 The root cause is rate_n_flags isn't set anymore. This patch fixes the problem. Signed-off-by: NIan Schram <ischram@telenet.be> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
This patch clears stations table for every rxon command. It removes iwl_rxon_add_station function in 3945. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
This patch repaces IPW with IWL in error messages. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The typedef is not required, we can just use "enum ieee80211_key_alg" instead of "ieee80211_key_alg" Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NMichael Wu <flamingice@sourmilk.net> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
This is nicer than the MAC_FMT stuff. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhu Yi 提交于
This patch adds the mac80211 based wireless drivers for the Intel PRO/Wireless 3945ABG/BG Network Connection and Intel Wireless WiFi Link AGN (4965) adapters. [ Move driver into it's own directory -DaveM ] Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-