if specified DVB-C bandwidth not supported then force 8MHz.
Should work for most cases.
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add these options as module parameters for now; should other drivers
need similar options we could add it to the LIRC api.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This is a duplicate of the timeout in rc_dev.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Added function to read BER for ISDB-T
Also SNR values fixed for ISDB-T
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Tha ARM randconfig builds came up with another rare build failure
for the dib3000mc driver, when dvb-usb-dibusb-mb is built-in and
dib3000mc is a loadable module:

ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!
ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!

Apparently this used to be a valid configuration (build-time, not
run-time), but broke as part of a cleanup.

I tried reverting the cleanup, but saw that the code was still wrong
then. This version adds a dependency for dib3000mb, to ensure that
dib3000mb does not force the dibusb_dib3000mc_frontend_attach function
to be built-in when dib3000mc is a loadable module.

I have also checked the two other files that were changed in the original
cleanup, and found them to be correct in either version, so I do not
touch that part.

As this is a rather obscure bug, there is no need for backports.

Fixes: 028c70ff ("[media] dvb-usb/dvb-usb-v2: use IS_ENABLED")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Tha ARM randconfig builds came up with another rare build failure
for the dib3000mc driver, when dvb-usb-dibusb-mb is built-in and
dib3000mc is a loadable module:

ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!
ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!

Apparently this used to be a valid configuration (build-time, not
run-time), but broke as part of a cleanup.

I tried reverting the cleanup, but saw that the code was still wrong
then. This tries to fix the code properly, by moving the problematic
functions into a new file that now is built as a loadable module or
built-in, whichever is correct for a particular configuration. It fixes
the regression as well as the runtime problem that already existed.

The new module dependency chain is now:

   dvb-usb-{dibusb_mc,a800,dib0700,umt-010,gp8psk}   dvb-usb-dibusb-mb
         |                        |                   |          |
   dvb-usb-dibusb-mc-common       |        ___________|          |
         |               |        |        |                     |
   dib3000mc (frontend)  |        |        |         dib3000mb (frontend)
                         |        |        |
                         |        |        |
                        dvb-usb-dibusb-common

I have also checked the two other files that were changed in the original
cleanup, and found them to be correct in either version, so I do not
touch that part.

As this is a rather obscure bug, there is no need for backports.

Fixes: 028c70ff ("[media] dvb-usb/dvb-usb-v2: use IS_ENABLED")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add the missing platform_device_del() before return from
lirc_parallel_init() in the error handling case.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>

ensure multiple separate register reads are from the same snapshot
Signed-off-by: NAbylay Ospan <aospan@netup.ru>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Currently we do not know what variant (bit length) of the nec protocol
is used, other than from guessing from the length of the scancode. Now
nec will be handled the same way as the sony protocol or the rc6 protocol;
one variant per bit length.

In the future we might want to expose the rc protocol type to userspace
and we don't want to be introducing this world of pain into userspace
too.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The hardware does not decode the 16, 20 or 24 bit variety.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When reporting decoded protocol use the enum rather than the bitmap.
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Simplify the code a little.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

ir_raw_event_handle is called anyway after the hw fifo content stored
in nvt->buf[] has been written to the kfifo. There is not really a
benefit in the potential additional call to ir_raw_event_handle
whilst nvt->buf[] is being processed.
Getting rid of this additional call allows to simplify the code.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

The call to nvt_get_rx_ir_data and nvt_process_rx_ir_data from
the ISR is protected with spinlock nvt->lock. Therefore it's
guaranteed that nvt->pkts is 0 when entering nvt_get_rx_ir_data
(as nvt->pkts is set to 0 at the end of nvt_process_rx_ir_data).
Having said that we can remove b_idx.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When removing module nuvoton-cir I get a fifo overrun warning.
It turned out to be caused by a spurious interrupt when the logical CIR
device is being disabled (although no interrupt source bit being set).
Reading the interrupt status register returns 0xff, therefore the fifo
overrun bit is mistakenly interpreted as being set.

Fix this by ignoring interrupts when interrupt source and status register
reads return 0xff.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

When removing module ir_lirc_codec I got this deadlock warning.
Fix this by introducing a separate mutex to protect access
to available_protocols instead of using ir_raw_handler_lock
for this purpose.

======================================================
[ INFO: possible circular locking dependency detected ]
4.7.0-next-20160729 #1 Not tainted
-------------------------------------------------------
rmmod/2542 is trying to acquire lock:
 (&dev->lock){+.+.+.}, at: [<ffffffffa03b1267>]
			ir_raw_handler_unregister+0x77/0xd0 [rc_core]

but task is already holding lock:
 (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffa03b1212>]
			ir_raw_handler_unregister+0x22/0xd0 [rc_core]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (ir_raw_handler_lock){+.+.+.}:
       [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0
       [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360
       [<ffffffffa03b1403>] ir_raw_get_allowed_protocols+0x13/0x30 [rc_core]
       [<ffffffffa03af8ea>] store_protocols+0x2fa/0x480 [rc_core]
       [<ffffffff8143e143>] dev_attr_store+0x13/0x20
       [<ffffffff81213c50>] sysfs_kf_write+0x40/0x50
       [<ffffffff81212f60>] kernfs_fop_write+0x150/0x1e0
       [<ffffffff81197613>] __vfs_write+0x23/0x120
       [<ffffffff81198740>] vfs_write+0xb0/0x190
       [<ffffffff81199a34>] SyS_write+0x44/0xa0
       [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8

-> #0 (&dev->lock){+.+.+.}:
       [<ffffffff810aac8c>] __lock_acquire+0x10fc/0x1270
       [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0
       [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360
       [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core]
       [<ffffffffa03c8c05>] ir_lirc_codec_exit+0x10/0x12 [ir_lirc_codec]
       [<ffffffff810e1b88>] SyS_delete_module+0x168/0x220
       [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(ir_raw_handler_lock);
                               lock(&dev->lock);
                               lock(ir_raw_handler_lock);
  lock(&dev->lock);

 *** DEADLOCK ***

1 lock held by rmmod/2542:
 #0:  (ir_raw_handler_lock){+.+.+.}, at: [<ffffffffa03b1212>]
			ir_raw_handler_unregister+0x22/0xd0 [rc_core]

stack backtrace:
CPU: 0 PID: 2542 Comm: rmmod Not tainted 4.7.0-next-20160729 #1
Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015
 0000000000000000 ffff88006e607cc0 ffffffff812715f5 ffffffff8232b230
 ffffffff8232b230 ffff88006e607d00 ffffffff810a846e 00000000790107f0
 ffff880079010818 ffff8800790107f0 1efeb9f4f0dd2e6f ffff880079010000
Call Trace:
 [<ffffffff812715f5>] dump_stack+0x68/0x93
 [<ffffffff810a846e>] print_circular_bug+0x1be/0x210
 [<ffffffff810aac8c>] __lock_acquire+0x10fc/0x1270
 [<ffffffff810bcead>] ? debug_lockdep_rcu_enabled+0x1d/0x20
 [<ffffffff810ab1f2>] lock_acquire+0xb2/0x1e0
 [<ffffffffa03b1267>] ? ir_raw_handler_unregister+0x77/0xd0 [rc_core]
 [<ffffffff815c087f>] mutex_lock_nested+0x5f/0x360
 [<ffffffffa03b1267>] ? ir_raw_handler_unregister+0x77/0xd0 [rc_core]
 [<ffffffff810a980e>] ? trace_hardirqs_on_caller+0xee/0x1b0
 [<ffffffffa03b1267>] ir_raw_handler_unregister+0x77/0xd0 [rc_core]
 [<ffffffffa03c8c05>] ir_lirc_codec_exit+0x10/0x12 [ir_lirc_codec]
 [<ffffffff810e1b88>] SyS_delete_module+0x168/0x220
 [<ffffffff815c55a5>] entry_SYSCALL_64_fastpath+0x18/0xa8
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This partly reverts commit 078600f5.

Due to the relocation of input_register_device() call, holding down a
button on an IR remote no longer resulted in repeated key down events.
Signed-off-by: NOle Ernst <olebowle@gmx.com>
Tested-by: NMatthias Reichl <hias@horus.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use regmap for I2C register access.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Check demod and ts locks and report lock status according to those.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use correct device for logging functions as we now have it due to
proper I2C client bindings.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Add I2C driver bindings in order to support proper I2C driver
registration with driver core.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Return DVBv5 statistics via legacy DVBv3 API.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement dvbv5 statistics for DVB-C.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement dvbv5 statistics for DVB-T2.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Implement dvbv5 statistics for DVB-T.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use 64-bit calculation.

Return error if tuner does not provide get_if_frequency() callback.
All currently used tuners has it.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

New IOCTLs (especially for the request API) do not necessarily need the
graph mutex acquired. Leave this up to the drivers.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Refactor copying the IOCTL argument structs from the user space and back,
in order to reduce code copied around and make the implementation more
robust.

As a result, the copying is done while not holding the graph mutex.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Each IOCTL handler can be listed in an array instead of using a large and
cumbersome switch. Do that.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Preparation for refactoring media IOCTL handling to unify common parts.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Instead of relying on the "simple-bus" compatible and the driver core
populating FIMC-IS child devices make the fimc-is driver populating
its child devices.  This prevents issues related to accessing ISP_I2C
clock registers with corresponding power domain switched off, which
popped out after applying some pending IOMMU driver patches.  Now the
I2C_ISP child devices will be instantiated only when required parent
device drivers are initialized and ready.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Since commit 04f59143
("i2c: let I2C masters ignore their children for PM")
the power.ignore_children flag is set when registering an I2C
adapter.  Since I2C transfers are not managed by the fimc-isp-i2c
driver its clients use pm_runtime_* calls directly to communicate
required power state of the bus controller.

However, when the power.ignore_children flag is set that doesn't
work, so clear that flag back after registering the adapter.
While at it drop pm_runtime_enable() call on the i2c_adapter
as it is already done by the I2C subsystem when registering
I2C adapter.

This patch is meant as a minimal change to fix the regression,
eventually the I2C_ISPx clock handling will be moved to the
top level fimc-is driver and whole runtime PM code is going to
be dropped from the fimc-is-i2c module.

Cc: <stable@vger.kernel.org> # 4.7+
Reported-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Suppresses warnings like:
s5p-fimc-md camera: Entity type for entity S5C73M3-OIF was not initialized!
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Suppresses warning like:
s5p-fimc-md camera: Entity type for entity S5K6A3 13-0010 was not initialized!
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Suppresses following warnings:

s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC.1 was not initialized!
s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.0 was not initialized!
s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.1 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-LITE.0 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-LITE.1 was not initialized!
s5p-fimc-md camera: Entity type for entity FIMC-IS-ISP was not initialized!
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

There is no need to keep all clocks prepared all the time. Call to
clk_prepare/unprepare can be done on demand from runtime pm callbacks
(it is allowed to call sleeping functions from that context).
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

This patch adds 3 more clocks to Exynos4 ISP driver. Enabling them is
needed to make the hardware operational. Till now it worked only because
those clocks were registered with IGNORE_UNUSED flag and were enabled
by default after SoC reset.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

It is likely that checking the result of the memory allocation just above
is expected here.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Use generic helpers instead of open-coding usage of runtime PM for system
sleep PM, which was potentially broken for some corner cases.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>