If we want hdmi_offset to be relative to the first block, zero value can
be used also for enabled block.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

R6xx has routable blocks, but there's nothing wrong in assignment based
on dig_encoder. We didn't really need that algorithm.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NChristian König <deathsimple@vodafone.de>
Reviewed-by: NChristian König <deathsimple@vodafone.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

this fixes a report that the new load code needed to be updated for
ajax's validity changes.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some boards such as the Intel D2700MUD allow you to have over 4GB of RAM.
The GTT on the PVR based devices is 32bit however. Hugh Dickins points out
that we should therefore be setting the mapping gfp mask.

This is not the whole fix for the problem. Some further shmem patches will
be needed to deal with the corner cases.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This provides the needed callback hooks to add hotplug display support to
the GMA36x0 devices.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In particular clean up the errata handling and correct the crtc masks. We do
this a bit differently using our device abstraction for neatness.

This doesn't address the ACPI opregion and hotplug plumbing, nor the IRQ related
changes that will need. It touches on backlight init but the full backlight
support is not in this change set.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The problem in console mode is lack of linear memory. We can solve that by
dropping to 16bpp. The mode setting X server will allocate its own GEM
framebuffer in 32bpp and all will be well.

We could just do 16bpp anyway but that would be a regression on the lower
modes as many distributions don't yet ship the generic mode setting KMS
drivers.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Introduce a panel presence check for Cedartrail. Non netbook devices don't
necessarily have a panel attached.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pull in various i915 bits that we will need to begin tackling the LVDS detect
and ACPI events. We try and drift towards the i915 version of the code with
the long term goal that at least some of it can one day be unified.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We don't want them uncached, combining will do nicely and fixes the performance
problem with the generic modesetting X server.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

We need to pull more stuff from the VBT in order to configure the clocking
correctly in all cases. Add the relevant bits from the other CDV driver work.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This was reported a long time ago (and I apologize to whoever it was that
reported it as I've lost the original report).
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID vendor IDs are always 3 characters long (4 with the terminating
0).  It doesn't make any sense to have a (possibly 8-byte) pointer
to the ID string in the quirk structure.
Signed-off-by: NIan Pilcher <arequipeno@gmail.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Requiring the first byte of the EDID base block header to be 0 means we
don't fix up as many transfer errors as we could.  Instead have the
callers specify whether it's meant to be block 0 or not, and
conditionally run header fixup based on that.

Bugzilla: https://bugzilla.redhat.com/812890Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes the build breakage reported by Stephen in -next
when merging the drm-next tree.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The error handling code w.r.t. idr usage looks inconsistent.

In the case of drm_mode_object_get() and drm_ctxbitmap_next() the error
handling is also incomplete.

Unify the code to follow the same pattern always.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since Matthew's changes we have to select arbitration.

Reported-by: devh on #radeon
Signed-off-by: NDave Airlie <airlied@redhat.com>

EFI doesn't typically make use of the legacy VGA ROM, but it may still be
configured to pass that through to a given video device. This may lead to
an inaccurate choice of default video device. Add support to efifb to pick
out the correct active video device.

v2: fix if->ifdef
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: hpa@zytor.com
Cc: matt.fleming@intel.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

vga-switcheroo currently changes the default VGA device by fiddling with
the IORESOURCE_ROM_SHADOW flag on the device. This isn't strictly accurate,
since there's no guarantee that switching also changes the ROM decoding.
Switch over to using the vgaarb functions for this.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The default VGA device is a somewhat fluid concept on platforms with
multiple GPUs. Add support for setting it so switching code can update
things appropriately, and make sure that the sysfs code returns the right
device if it's changed.

v2: Updated to fix builds when __ARCH_HAS_VGA_DEFAULT_DEVICE is false.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: benh@kernel.crashing.org
Cc: airlied@redhat.com
Signed-off-by: NDave Airlie <airlied@redhat.com>

- add support for rs6xx
- add support for DCE4/5
- fixup 6xx/7xx
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds register definitions for HDMI/DP audio on
DCE2/3/4/5 hardware.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Improve handling of bpc (bits per color) in radeon.
In most cases we want 8 except for HDMI, DP, LVDS, and eDP.

v2: handle DP better.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

HD panel (1366x768) found most commonly on laptops can't be represented
exactly in CVT/DMT expression, which leads to 1368x768 instead, because
1366 can't be divided by 8.

Add a hack to convert to 1366x768 manually as an exception.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

[airlied: fixed one more new one added since]
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some common sizes that don't show up in DMT.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We want the same type for extra modes inferred from ranges.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

EDID 1.4 retcons the meaning of the "GTF feature" bit to mean "is
continuous frequency", and moves the set of supported timing formulas
into the range descriptor itself.  In any event, the range descriptor
can act as a filter on the DMT list without regard to a specific timing
formula.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Copied from the list in xserver.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Slightly more honest naming.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

mode_in_range() handles what this was warning about.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It won't find any, yet.  Fix up callers to match: standard mode codes
will look prefer r-b modes for a given size if present, EST3 mode codes
will look for exactly the r-b-ness mentioned in the mode code.  This
might mean fewer modes matched for EST3 mode codes between now and when
the DMT mode list regrows the r-b modes, but practically speaking EST3
codes don't exist in the wild.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>