- 19 5月, 2006 1 次提交
-
-
由 David Woodhouse 提交于
Device node major/minor numbers are just stored in the payload of a single data node. Just extend that to 4 bytes and use new_encode_dev() for it. We only use the 4-byte format if we _need_ to, if !old_valid_dev(foo). This preserves backwards compatibility with older code as much as possible. If we do make devices with major or minor numbers above 255, and then mount the file system with the old code, it'll just read the first two bytes and get the numbers wrong. If it comes to garbage-collect it, it'll then write back those wrong numbers. But that's about the best we can expect. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 18 5月, 2006 2 次提交
-
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 17 5月, 2006 14 次提交
-
-
由 Alexander Belyakov 提交于
There is a second revision of "mtdconcat NAND/Sibley" patch. I hope the patch will not get damaged as I'm posting it from gmail account, thanks to Jorn. The patch adds previously missing concat_writev(), concat_writev_ecc(), concat_block_isbad(), concat_block_markbad() functions to make concatenation layer compatible with Sibley and NAND chips. Patch has been cleared from whitespaces, fixed some lines of code as requested. Also I have added code for alignment check that should support Jorn's "writesize" patch. Signed-off-by: NAlexander Belyakov <alexander.belyakov@intel.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Martin Michlmayr 提交于
The following difference was found between the mainline and linux-mips kernel. LASAT depends on MTD_CFI. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Martin Michlmayr 提交于
In an unrelated MTD commit, a description about the ms02-nv module got removed from Kconfig. While I personally agree with this removal, the module maintainer (Maciej W. Rozycki) would like to see it added back. In the absense of any consistency regarding Kconfig descriptions his wish should be followed. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Acked-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Sean Young 提交于
Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Vitaly Wool 提交于
'oobavail' parameter of mtd_info structure is now propagated to the MTD partitions Signed-off-by: NVitaly Wool <vwool@ru.mvista.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Sean Young 提交于
Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Nicolas Pitre 提交于
This allows for much better abstraction and separation of the XIP and non-XIP cases with their own specific implementations. This fixes the case where a timeout was tripped on in the XIP case by the code that was meant for the non-XIP case only. This also makes for a nice code reduction. Signed-off-by: NNicolas Pitre <nico@cam.org> CC: "Alexey, Korolev" <alexey.korolev@intel.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Nicolas Pitre 提交于
... otherwise xip_enable() won't do the right thing. Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Josh Boyer 提交于
The patch below fixes a potential starvation issue that can arise when there is contention on a chip during a period when a process is currently writing to it. The starvation is avoided by conditionally rescheduling when the chip is left in a state usable by other processes. Signed-off-by: NJosh Boyer <jdub@us.ibm.com> Signed-off-by: NTom Gall <tom_gall@vnet.ibm.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
We have to pack at least the jint16_t structure, because otherwise it'll be four bytes in size. Thankfully, we can do that and _not_ pack the actual node structures, and the compiler still doesn't emit stupid code. Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Sergei Shtylyov 提交于
On AMD Au1550 the static bus controller fails to keep -CE asserted during chip ready delay on read commands and the NAND chip being used requires this. So, the current driver allows nand_base.c to drive -CE manually during the entire sector read. When the PCMCIA driver is enabled however, occasionally the ECC errors occur on NAND reads. This happens because the PCMCIA driver polls sockets periodically and reads one of the board's control/status regs (BCSRs) which are on the same static bus as the NAND flash, and just use another chip select (and the NOR flash also resides on that bus), so as the NAND driver forces NAND chip select asserted and the -RE signal is shared, a contention occurs on the static bus when BCSR or NOR flash is read while we're reading from NAND. So, we either can't keep interrupts enabled during the whole NAND sector read (which is hardly acceptable), or have to implement some interlocking scheme between multiple drivers (which is painful, and makes me shudder :-). There's a third way which has proven to work: to force -CE asserted only while we're waiting for a NAND chip to become ready after a read command, disabling interrupts for a maximum of 25 microseconds (according to Toshiba TC58DVM92A1FT00 datasheet -- this chip is mentioned in the board schematics); for Samsung NAND chip which seems to be actually used this delay is even less, 12 us. Signed-off-by: NKonstantin Baydarov <kbaidarov@ru.mvista.com> Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Ben Dooks 提交于
Fix build warnings from drivers/mtd/redboot.c due to use of `unsigned long` in `struct fis_image_desc` for fields being passed to swab32s() which expects __u32 * Change the entries to uint32_t to make them compatible with the swab32s() function Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Sergei Shtylyov 提交于
During the last cleanup of the AMD Au1550 NAND driver the old buglet was reintroduced: as the MEM_STNDCTL register is write-only and seem to always read as 0x31, read-modify-write to it done in au1xxx_nand_init() will have the side effect of enabling -RCS0/1 pin override (via bits 4/5 of this reg.), thus possibly causing a contention on the static bus when the NOR flash (using -RCS0) or board control status registers (using -RCS2) are read. Luckily, this goes away with a first NAND access, since au1550_hwcontrol() doesn't try to read this register before writing anymore. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
fs/jffs2/summary.c: In function ‘jffs2_sum_write_data’: fs/jffs2/summary.c:658: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘uint32_t’ Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
- 16 5月, 2006 23 次提交
-
-
由 David Brownell 提交于
Mark certain functions with __init and __exit appropriately. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
We all inherited the same error from the original NAND board driver which got copied and changed. Fix them all at once... Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Adrian Bunk 提交于
On Mon, May 15, 2006 at 12:56:37AM -0700, Andrew Morton wrote: >... > Changes since 2.6.17-rc3-mm1: >... > git-mtd.patch >... > git trees >... If we correct the names of the config options, the code might actually work as intended... Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 David Woodhouse 提交于
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Florin Malita 提交于
If jffs2_scan_eraseblock() fails and the exit path is taken, 's' is not being deallocated. Reported by Coverity, CID: 1258. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
-
由 Andrew Morton 提交于
On alpha: drivers/net/dl2k.c: In function `rio_free_tx': drivers/net/dl2k.c:768: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c:768: error: (Each undeclared identifier is reported only once drivers/net/dl2k.c:768: error: for each function it appears in.) drivers/net/dl2k.c: In function `receive_packet': drivers/net/dl2k.c:896: error: `DMA_48BIT_MASK' undeclared (first use in this function) drivers/net/dl2k.c: In function `rio_close': drivers/net/dl2k.c:1803: error: `DMA_48BIT_MASK' undeclared (first use in this function) Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
fs/jffs2/nodelist.c: In function `check_node_data': fs/jffs2/nodelist.c:441: warning: unsigned int format, different type arg (arg 4) fs/jffs2/nodelist.c:464: warning: int format, different type arg (arg 5) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Osterlund 提交于
Changing the driver to use dynamic device numbers was one of the many changes that were made in order to have the driver accepted into the mainline kernel. Therefore I would say that the entry in devices.txt is obsolete. This patch removes it. Signed-off-by: NPeter Osterlund <petero2@telia.com> Cc: Torben Mathiasen <device@lanana.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Kleffel 提交于
Add the IBM microdrive to the known PCMCIA IDs for ide_cs. Signed-off-by: NThomas Kleffel <tk@maintech.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Aneesh Kumar 提交于
Fix some typos in Documentation/memory-barriers.txt Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
HOTPLUG_CPU entry says "Say Y..." then "Say N.". Slightly ugly, so I fixed it up, and added remark about suspend on SMP as a bonus. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Carl-Daniel Hailfinger 提交于
Do not enable the SMBus device on Asus boards if suspend is used. We do not reenable the device on resume, leading to all sorts of undesirable effects, the worst being a total fan failure after resume on Samsung P35 laptop. Signed-off-by: NCarl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Revert commit f6422f17, due to Valdis.Kletnieks@vt.edu wrote: > > There seems to have been a bug introduced in this changeset: > > Am running 2.6.17-rc3-mm1. When this changeset is applied, 'mount --bind' > misbehaves: > > > # mkdir /foo > > # mount -t tmpfs -o rw,nosuid,nodev,noexec,noatime,nodiratime none /foo > > # mkdir /foo/bar > > # mount --bind /foo/bar /foo > > # tail -2 /proc/mounts > > none /foo tmpfs rw,nosuid,nodev,noexec,noatime,nodiratime 0 0 > > none /foo tmpfs rw 0 0 > > Reverting this changeset causes both mounts to have the same options. > > (Thanks to Stephen Smalley for tracking down the changeset...) > Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Christoph Hellwig <hch@infradead.org> Cc: <Valdis.Kletnieks@vt.edu> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
When we fail to mount from a valid root device list out the filesystems we have tried to mount it with. This gives the user vital diagnostics as to what is missing from their kernel. For example in the fragment below the kernel does not have CRAMFS compiled into the kernel and yet appears to recognise it at the RAMDISK detect stage. Later the mount fails as we don't have the filesystem. RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 1604KiB [1 disk] into ram disk... done. XFS: bad magic number XFS: SB validate failed No filesystem could mount root, tried: reiserfs ext3 ext2 msdos vfat iso9660 jfs xfs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1) Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Mentioned by Mark Armbrust somewhere on Usenet. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Walker 提交于
drivers/char/tpm/tpm.c: In function 'tpm_register_hardware': drivers/char/tpm/tpm.c:1157: warning: assignment from incompatible pointer type Signed-off-by: NDaniel Walker <dwalker@mvista.com> Acked-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Cox 提交于
Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Fix the constant used for the base address when it cannot be determined from ACPI. It was off by one order of magnitude. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin LaHaise 提交于
Add support to oprofile for the Intel Core Solo and Core Duo processors. See also the patch to add support to oprofile-0.9.1-8.1.1 at http://www.kvack.org/~bcrl/patches/oprofile/oprofile-core-0.9.1.diff . Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hua Zhong 提交于
can_share_swap_page() is used to check if the page has the last reference. This avoids allocating a new page for COW if it's the last page. However, if CONFIG_SWAP is not set, can_share_swap_page() is defined as 0, thus always causes a copy for the last COW page. The below simple patch fixes it. Signed-off-by: NHua Zhong <hzhong@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Latchesar Ionkov 提交于
Multiple races can happen when v9fs is interrupted by a signal and Tflush message is sent to the server. After v9fs sends Tflush it doesn't wait until it receives Rflush, and possibly the response of the original message. This behavior may confuse v9fs what fids are allocated by the file server. This patch fixes the races and the fid allocation. Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@hera.kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-