- 09 5月, 2006 20 次提交
-
-
由 Sergei Shtylyov 提交于
Ensure that 8-bit mode is selected for the on-board Realtek RTL8019AS chip on Toshiba RBHMA4x00, get rid of the duplicate #ifdef's when setting ei_status.word16. The chip's datasheet says that the PSTOP register shouldn't exceed 0x60 in 8-bit mode -- ensure this too. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Herbert Valerio Riedel 提交于
since the au1000 driver already selects the CRC32 routines, simply replace the internal ether_crc() implementation with the semantically equivalent one from <linux/crc32.h> Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org> Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Update version number, to track changes. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
The newest Yukon Ultra chipset's require more special tweaks. They seem to be like the Yukon XL chipsets. This code is transliterated from the latest SysKonnect driver; I don't have any Ultra hardware. Signed-off-by: NStephe Hemminger <shemminger@osdl.org> Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Need to make sure interrupt is not racing with unregister of network device. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
It is more efficient not to write the status ring from the processor and just read the active portion. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Need to make the edge-triggered workaround timer faster to get marginally better peformance. The test_and_set_bit in schedule_prep() acts as a barrier already. Make it a module parameter so that laptops who are concerned about power can set it to 0; and user's stuck with broken BIOS's can turn the driver into pure polling. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Gcc isn't smart enough to know that it can do a modulo operation with power of 2 constant by doing a mask. So add macro to do it for us. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
Mask for transmit ring status was picking up bits from the unused sync ring. They were always zero, so far... Also, make sure to remind self not to make tx ring too big. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
The status interrupt flag should be cleared before processing, not afterwards to avoid race. Need to process in poll routine even if no new interrupt status. This is a normal occurrence when more than 64 frames (NAPI weight) are processed in one poll routine. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Stephen Hemminger 提交于
This is a backout of earlier patch. The whole rescheduling hack was a bad idea. It doesn't really solve the problem and it makes the code more complicated for no good reason. Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
-
由 Andi Kleen 提交于
Taking the cpu hotplug semaphore in a normal events workqueue is unsafe because other tasks can wait for any workqueues with it hold. This results in a deadlock. Move the DBS timer into its own work queue which is not affected by other work queue flushes to avoid this. Has been acked by Venkatesh. Cc: venkatesh.pallipadi@intel.com Cc: cpufreq@lists.linux.org.uk Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Based on analysis&patch from Robert Hentosch Observed on a Dell PE6850 with 16GB The problem occurs very early on, when the kernel allocates space for the temporary memory map called bootmap. The bootmap overlaps the EBDA region. EBDA region is not historically reserved in the e820 mapping. When the bootmap is freed it marks the EBDA region as usable. If you notice in setup.c there is already code to work around the EBDA in reserve_ebda_region(), this check however occurs after the bootmap is allocated and doesn't prevent the bootmap from using this range. AK: I redid the original patch. Thanks also to Jan Beulich for spotting some mistakes. Cc: Robert_Hentosch@dell.com Cc: jbeulich@novell.com Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Corey Minyard 提交于
Playing with NMI watchdog on x86_64, I discovered that it didn't do what I expected. It always panic-ed, even when it didn't happen from interrupt context. This patch solves that problem for me. Also, in this case, do_exit() will be called with interrupts disabled, I believe. Would it be wise to also call local_irq_enable() after nmi_exit()? [Yes I added it -AK] Currently, on x86_64, any NMI watchdog timeout will cause a panic because the irq count will always be set to be in an interrupt when do_exit() is called from die_nmi(). If we add nmi_exit() to the die_nmi() call (since the nmi will never exit "normally") it seems to solve this problem. The following small program can be used to trigger the NMI watchdog to reproduce this: main () { iopl(3); for (;;) asm("cli"); } Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Corey Minyard 提交于
I noticed this when poking around in this area. The oops_begin() function in x86_64 would only conditionally claim the die_lock if the call is nested, but oops_end() would always release the spinlock. This patch adds a nest count for the die lock so that the release of the lock is only done on the final oops_end(). Signed-off-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
The IOMMU code can only deal with 8 northbridges. Error out when more are found. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kimball Murray 提交于
The patch addresses a problem with ACPI SCI interrupt entry, which gets re-used, and the IRQ is assigned to another unrelated device. The patch corrects the code such that SCI IRQ is skipped and duplicate entry is avoided. Second issue came up with VIA chipset, the problem was caused by original patch assigning IRQs starting 16 and up. The VIA chipset uses 4-bit IRQ register for internal interrupt routing, and therefore cannot handle IRQ numbers assigned to its devices. The patch corrects this problem by allowing PCI IRQs below 16. Cc: len.brown@intel.com Signed-off by: Natalie Protasevich <Natalie.Protasevich@unisys.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] remove asm-ia64/bitops.h self-inclusion [IA64] strcpy returns NULL pointer and not destination pointer
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA] irda-usb: use NULL instead of 0 [IPV4]: Remove likely in ip_rcv_finish() [NET]: Create netdev attribute_groups with class_device_add [CLASS DEVICE]: add attribute_group creation
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: Do not overwrite makefile as anohter user kbuild: drivers/video/logo/ - fix ident glitch kbuild: fix gen_initramfs_list.sh kbuild modpost - relax driver data name kbuild: removing .tmp_versions considered harmful kbuild: fix modpost segfault for 64bit mipsel kernel
-
- 08 5月, 2006 10 次提交
-
-
由 Trond Myklebust 提交于
It is insane to be giving lease_init() the task of freeing the lock it is supposed to initialise, given that the lock is not guaranteed to be allocated on the stack. This causes lockups in fcntl_setlease(). Problem diagnosed by Daniel Hokka Zakrisson <daniel@hozac.com> Also fix a slab leak in __setlease() due to an uninitialised return value. Problem diagnosed by Björn Steinbrink. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Tested-by: NDaniel Hokka Zakrisson <daniel@hozac.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
Change the conditional of the outputmakefile rule to be evaluated entirely in make, and add a conditional to not touch the generated makefile when e.g. running 'make install' as root while the build was done as non-root. Also adjust the comment describing this, and move the message printing and redirection to mkmakefile. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3507/1: Replace map_desc.physical with map_desc.pfn: aaed2000 [ARM] 3506/1: aaec2000: debug-macro.S needs hardware.h [ARM] 3505/1: aaec2000: entry-macro.S needs asm/arch/irqs.h [ARM] 3504/1: Fix clcd includes for aaec2000 [ARM] 3503/1: Fix map_desc structure for aaec2000 [ARM] 3501/1: i.MX: fix lowlevel debug macros [ARM] rtc-sa1100: fix compiler warnings and error cleanup [ARM] Allow SA1100 RTC alarm to be configured for wakeup
-
由 Bellido Nicolas 提交于
Patch from Bellido Nicolas aaed2000 map_desc.pfn conversion Signed-off-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bellido Nicolas 提交于
Patch from Bellido Nicolas Include hardware.h in debug-macro.S, otherwise io_p2v is undefined. Signed-off-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bellido Nicolas 提交于
Patch from Bellido Nicolas Since git commit 2b78838842346da390e8547cd37035184376d506, entry-macro.S needs to include asm/arch/irqs.h Signed-off-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bellido Nicolas 提交于
Patch from Bellido Nicolas Since this patch: [ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control register linux/amba/bus.h needs to be included before linux/amba/clcd.h Signed-off-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bellido Nicolas 提交于
Patch from Bellido Nicolas Patch: [ARM] 2982/1: Replace map_desc.physical with map_desc.pfn: aaec2000 incorrectly expanded the struct map_desc for aaec2000. Signed-off-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Sascha Hauer 提交于
Patch from Sascha Hauer This patch fixes the addruart macro to work with both mmu enabled and disabled. Signed-off-by: NSascha Hauer <s.hauer@pengutonix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
This holds the task lock (and, for ptrace_attach, the tasklist_lock) over the actual attach event, which closes a race between attacking to a thread that is either doing a PTRACE_TRACEME or getting de-threaded. Thanks to Oleg Nesterov for reminding me about this, and Chris Wright for noticing a lost return value in my first version. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 5月, 2006 4 次提交
-
-
由 Randy Dunlap 提交于
Use NULL instead of 0 for a null pointer value (sparse warning): drivers/net/irda/irda-usb.c:1781:30: warning: Using plain integer as NULL pointer Also, correct timeout argument to use milliseconds instead of jiffies. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hua Zhong 提交于
This is another result from my likely profiling tool (dwalker@mvista.com just sent the patch of the profiling tool to linux-kernel mailing list, which is similar to what I use). On my system (not very busy, normal development machine within a VMWare workstation), I see a 6/5 miss/hit ratio for this "likely". Signed-off-by: NHua Zhong <hzhong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Atomically create attributes when class device is added. This avoids the race between registering class_device (which generates hotplug event), and the creation of attribute groups. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Extend the support of attribute groups in class_device's to allow groups to be created as part of the registration process. This allows network device's to avoid race between registration and creating groups. Note that unlike attributes that are a property of the class object, the groups are a property of the class_device object. This is done because there are different types of network devices (wireless for example). Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2006 6 次提交
-
-
由 Russell King 提交于
Fix: drivers/rtc/rtc-sa1100.c: In function `sa1100_rtc_proc': drivers/rtc/rtc-sa1100.c:298: warning: unsigned int format, long unsigned int arg (arg 3) and arrange for sa1100_rtc_open() to pass the devid to free_irq() rather than NULL. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The SA1100 RTC alarm can be configured to wake up the CPU from sleep mode, and the RTC driver has been using the API to configure this mode. Unfortunately, the code was which sets the required bit in the hardware was missing. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 John Heffner 提交于
Xiaoliang (David) Wei wrote: > Hi gurus, > > I am reading the code of tcp_highspeed.c in the kernel and have a > question on the hstcp_cong_avoid function, specifically the following > AI part (line 136~143 in net/ipv4/tcp_highspeed.c ): > > /* Do additive increase */ > if (tp->snd_cwnd < tp->snd_cwnd_clamp) { > tp->snd_cwnd_cnt += ca->ai; > if (tp->snd_cwnd_cnt >= tp->snd_cwnd) { > tp->snd_cwnd++; > tp->snd_cwnd_cnt -= tp->snd_cwnd; > } > } > > In this part, when (tp->snd_cwnd_cnt == tp->snd_cwnd), > snd_cwnd_cnt will be -1... snd_cwnd_cnt is defined as u16, will this > small chance of getting -1 becomes a problem? > Shall we change it by reversing the order of the cwnd++ and cwnd_cnt -= > cwnd? Absolutely correct. Thanks. Signed-off-by: NJohn Heffner <jheffner@psc.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
There are out of date and don't tell the user anything useful. The similar messages which IPV4 and the core networking used to output were killed a long time ago. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Calling sock_orphan inside bh_lock_sock in dccp_close can lead to dead locks. For example, the inet_diag code holds sk_callback_lock without disabling BH. If an inbound packet arrives during that admittedly tiny window, it will cause a dead lock on bh_lock_sock. Another possible path would be through sock_wfree if the network device driver frees the tx skb in process context with BH enabled. We can fix this by moving sock_orphan out of bh_lock_sock. The tricky bit is to work out when we need to destroy the socket ourselves and when it has already been destroyed by someone else. By moving sock_orphan before the release_sock we can solve this problem. This is because as long as we own the socket lock its state cannot change. So we simply record the socket state before the release_sock and then check the state again after we regain the socket lock. If the socket state has transitioned to DCCP_CLOSED in the time being, we know that the socket has been destroyed. Otherwise the socket is still ours to keep. This problem was discoverd by Ingo Molnar using his lock validator. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
It makes sense to add this simple statistic to keep track of received multicast packets. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-