The recently updated CPUID specification names new SVM feature bits.
Add them to the list of reported features.
Signed-off-by: NAndre Przywara <andre.przywara@amd,com>
LKML-Reference: <1283778860-26843-5-git-send-email-andre.przywara@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

AMD's public CPUID specification has been updated and some bits have
got names. Add them to properly describe new CPU features.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
LKML-Reference: <1283778860-26843-3-git-send-email-andre.przywara@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The AMD SSE5 feature set as-it has been replaced by some extensions
to the AVX instruction set. Thus the bit formerly advertised as SSE5
is re-used for one of these extensions (XOP).
Although this changes the /proc/cpuinfo output, it is not user visible, as
there are no CPUs (yet) having this feature.
To avoid confusion this should be added to the stable series, too.

Cc: stable@kernel.org [.32.x .34.x, .35.x]
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
LKML-Reference: <1283778860-26843-2-git-send-email-andre.przywara@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Accomodate the original C1E-aware idle routine to the different times
during boot when the BIOS enables C1E. While at it, remove the synthetic
CPUID flag in favor of a single global setting which denotes C1E status
on the system.

[ hpa: changed c1e_enabled to be a bool; clarified cpu bit 3:21 comment ]
Signed-off-by: NMichal Schmidt <mschmidt@redhat.com>
LKML-Reference: <20100727165335.GA11630@aftab>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>

Add package level thermal and power limit feature support.

The two MSRs and features are new starting with Intel's Sandy Bridge processor.

Please check Intel 64 and IA-32 Architectures SDMV Vol 3A 14.5.6 Power Limit
Notification and 14.6 Package Level Thermal Management.

This patch also fixes a bug which defines reverse THERM_INT_LOW_ENABLE bit and
THERM_INT_HIGH_ENABLE bit.

[ hpa: fixed up against current tip:x86/cpu ]
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-2-git-send-email-fenghua.yu@intel.com>
Reviewed-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Clean up the formatting in cpufeature.h, and remove an unnecessary
name override.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <tip-*@git.kernel.org>

Add cpu feature bit support for the XSAVEOPT instruction.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100719230205.523204988@sbs-t61.sc.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Intel has defined CPUID leaf 7 as the next set of feature flags (see
the AVX specification, version 007).  Add support for this new feature
flags word.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-*@vger.kernel.org>

We already have cpufeature indicies above 255, so use a 16-bit number
for the alternatives index.  This consumes a padding field and so
doesn't add any size, but it means that abusing the padding field to
create assembly errors on overflow no longer works.  We can retain the
test simply by redirecting it to the .discard section, however.

[ v3: updated to include open-coded locations ]
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <tip-f88731e3068f9d1392ba71cc9f50f035d26a0d4f@git.kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add support for the newly documented F16C (16-bit floating point
conversions) and RDRND (RDRAND instruction) CPU feature flags.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The new IA32_ENERGY_PERF_BIAS MSR allows system software to give
hardware a hint whether OS policy favors more power saving,
or more performance.  This allows the OS to have some influence
on internal hardware power/performance tradeoffs where the OS
has previously had no influence.

The support for this feature is indicated by CPUID.06H.ECX.bit3,
as documented in the Intel Architectures Software Developer's Manual.

This patch discovers support of this feature and displays it
as "epb" in /proc/cpuinfo.
Signed-off-by: NVenkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.LFD.2.00.1006032310160.6669@localhost.localdomain>
Signed-off-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

gcc 3 is too braindamaged to be able to compile static_cpu_has() --
apparently it can't tell that a constant passed to an inline function
is still a constant -- so if we're using gcc 3, just use the dynamic
test.  This is bad for performance, but if you care about performance,
don't use an ancient, known-to-optimize-poorly compiler.
Reported-and-tested-by: NEric Dumazet <eric.dumazet@gmail.com>
LKML-Reference: <4BF2FF82.7090005@zytor.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

For CPU-feature-specific code that touches performance-critical paths,
introduce a static patching version of [boot_]cpu_has().  This is run
at alternatives time and is therefore not appropriate for most
initialization code, but on the other hand initialization code is
generally not performance critical.

On gcc 4.5+ this uses the new "asm goto" feature.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1273135546-29690-2-git-send-email-avi@redhat.com>

By semi-popular demand, this adds the Core Performance Boost feature
flag to /proc/cpuinfo. Possible use case for this is userspace tools
like cpufreq-aperf, for example, so that they don't have to jump through
hoops of accessing "/dev/cpu/%d/cpuid" in order to check for CPB hw
support, or call cpuid from userspace.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1270065406-1814-2-git-send-email-bp@amd64.org>
Reviewed-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch adds code to cpu initialization path to detect
the extended virtualization features of AMD cpus to show
them in /proc/cpuinfo.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <1260792521-15212-1-git-send-email-joerg.roedel@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use NodeId MSR to get NodeId and number of nodes per processor.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20091216144355.GB28798@alberich.amd.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

PCLMULQDQ is used to accelerate the most time-consuming part of GHASH,
carry-less multiplication. More information about PCLMULQDQ can be
found at:

http://software.intel.com/en-us/articles/carry-less-multiplication-and-its-usage-for-computing-the-gcm-mode/

Because PCLMULQDQ changes XMM state, its usage must be enclosed with
kernel_fpu_begin/end, which can be used only in process context, the
acceleration is implemented as crypto_ahash. That is, request in soft
IRQ context will be defered to the cryptd kernel thread.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move the APERFMPERF capacility into a X86_FEATURE flag so that it
can be used outside of the acpi cpufreq driver.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Yanmin <yanmin_zhang@linux.intel.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: cpufreq@vger.kernel.org
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Construct entire NodeID and use it as cpu_llc_id. Thus internal node
siblings are stored in llc_shared_map.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add cpu feature bit support for the MOVBE and POPCNT instructions.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Booting a 32-bit kernel on Magny-Cours results in the following panic:

  ...
  Using APIC driver default
  ...
  Overriding APIC driver with bigsmp
  ...
  Getting VERSION: 80050010
  Getting VERSION: 80050010
  Getting ID: 10000000
  Getting ID: ef000000
  Getting LVT0: 700
  Getting LVT1: 10000
  Kernel panic - not syncing: Boot APIC ID in local APIC unexpected (16 vs 0)
  Pid: 1, comm: swapper Not tainted 2.6.30-rcX #2
  Call Trace:
   [<c05194da>] ? panic+0x38/0xd3
   [<c0743102>] ? native_smp_prepare_cpus+0x259/0x31f
   [<c073b19d>] ? kernel_init+0x3e/0x141
   [<c073b15f>] ? kernel_init+0x0/0x141
   [<c020325f>] ? kernel_thread_helper+0x7/0x10

The reason is that default_get_apic_id handled extension of local APIC
ID field just in case of XAPIC.

Thus for this AMD CPU, default_get_apic_id() returns 0 and
bigsmp_get_apic_id() returns 16 which leads to the respective kernel
panic.

This patch introduces a Linux specific feature flag to indicate
support for extended APIC id (8 bits instead of 4 bits width) and sets
the flag on AMD CPUs if applicable.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: <stable@kernel.org>
LKML-Reference: <20090608135509.GA12431@alberich.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

setup_force_cpu_cap() only have one user (Xen guest code),
but it should not reuse cleared_cpu_cpus, otherwise it
will have problems on SMP.

Need to have a separate cpu_cpus_set array too, for forced-on
flags, beyond the forced-off flags.

Also need to setup handling before all cpus caps are combined.

[ Impact: fix the forced-set CPU feature flag logic ]

Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NYinghai Lu <yinghai.lu@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

X86_FEATURE_MCE = Machine Check Exception
X86_FEATURE_MCA = Machine Check Architecture

[ Impact: cleanup ]
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1241329295.6321.1.camel@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add support for Always Running APIC timer, CPUID_0x6_EAX_Bit2.
This bit means the APIC timer continues to run even when CPU is
in deep C-states.

The advantage is that we can use LAPIC timer on these CPUs
always, and there is no need for "slow to read and program"
external timers (HPET/PIT) and the timer broadcast logic
and related code in C-state entry and exit.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Intel AES-NI is a new set of Single Instruction Multiple Data (SIMD)
instructions that are going to be introduced in the next generation of
Intel processor, as of 2009. These instructions enable fast and secure
data encryption and decryption, using the Advanced Encryption Standard
(AES), defined by FIPS Publication number 197.  The architecture
introduces six instructions that offer full hardware support for
AES. Four of them support high performance data encryption and
decryption, and the other two instructions support the AES key
expansion procedure.

The white paper can be downloaded from:

http://softwarecommunity.intel.com/isn/downloads/intelavx/AES-Instructions-Set_WP.pdf

AES may be used in soft_irq context, but MMX/SSE context can not be
touched safely in soft_irq context. So in_interrupt() is checked, if
in IRQ or soft_irq context, the general x86_64 implementation are used
instead.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

For Intel 7400 series CPUs, the recommendation is to use a clflush on the
monitored address just before monitor and mwait pair [1].

This clflush makes sure that there are no false wakeups from mwait when the
monitored address was recently written to.

[1] "MONITOR/MWAIT Recommendations for Intel Xeon Processor 7400 series"
    section in specification update document of 7400 series
    http://download.intel.com/design/xeon/specupdt/32033601.pdfSigned-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new synthetic-cpuid bit definition

add X86_FEATURE_NONSTOP_TSC to the cpufeature bits - this is in
preparation of Venki's always-running-TSC patch.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Remove duplicate #define from 'cpufeature.h'.

This also fixes the following sparse warning:

 arch/x86/kernel/cpu/capflags.c:54:3: warning: Initializer entry defined twice
 arch/x86/kernel/cpu/capflags.c:58:3:   also defined here
Signed-off-by: NHannes Eder <hannes@hanneseder.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Number declaration only.

Add X86_FEATURE_HYPERVISOR bit (CPUID level 1, ECX, bit 31).
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: None, bit reservation only

Add a synthetic TSC_RELIABLE feature bit which will be used to mark
TSC as reliable so that we could skip all the runtime checks for
TSC stablity, which have false positives in virtual environment.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: fix xsave slowdown regression

Fix two features from conflicting in feature bits.

Fixes this performance regression:

   Subject: cpu2000(both float and int) 13% regression with 2.6.28-rc1
   http://lkml.org/lkml/2008/10/28/36Reported-by: N"Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Bisected-by: N"Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:

a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: System hang when AMD C1E machines switch into C2/C3

AMD C1E enabled systems do not work with normal ACPI C-states 
even if the BIOS is advertising them. Limit the C-states to 
C1 for the ACPI processor idle code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The hardware virtualization technology evolves very fast. But currently
it's hard to tell if your CPU support a certain kind of HW technology
without digging into the source code.

The patch add a new catagory in "flags" under /proc/cpuinfo. Now "flags"
can indicate the (important) HW virtulization features the CPU supported
as well.

Current implementation just cover Intel VMX side.
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The long noops ("NOPL") are supposed to be detected by family >= 6.
Unfortunately, several non-Intel x86 implementations, both hardware
and software, don't obey this dictum.  Instead, probe for NOPL
directly by executing a NOPL instruction and see if we get #UD.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: "smx" flags showed as "safer" in /proc/cpuinfo

The SMX feature flag is the so-called "safer mode"... I had put that
in quotes, but that flagged it as a cpuinfo flag name.  Remove the
quotes to correct the flag name in /proc/cpuinfo.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Clean up overlong lines and stealth whitespace in
<asm-x86/cpufeature.h>.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add all Intel CPUID features currently documented in the CPUID spec
(AP-485, 241618-032, Dec 2007) and the AVX Programming Reference
(319433-003, Aug 2008).
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We have had a number of cases where <asm/cpufeature.h> (and its
predecessors) have diverged substantially from the names list in
/proc/cpuinfo.  This patch generates the latter from the former.

It retains the option for explicitly overriding the strings, but by
making that require a separate action it should at least be less
likely to happen.

It would be good to do a future pass and rename strings that are
gratuituously different in the kernel (/proc/cpuinfo is a userspace
interface and must remain constant.)
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>