[ Upstream commit 7ef55f6744c45e3d7c85a3f74ada39b67ac741dd ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the
initiator shall not respond to a RESELECTION phase if other than two SCSI ID
bits are on the DATA BUS." This issue (too many bits set) has been observed in
the wild, so add a check.
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 070356513963be6196142acff56acc8359069fa1 ]

When sense data is valid, call set_driver_byte(cmd, DRIVER_SENSE).  Otherwise
some callers of scsi_execute() will ignore sense data.  Don't set DID_ERROR or
DID_RESET just because sense data is missing.
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7c8ed783c2faa1e3f741844ffac41340338ea0f4 ]

This is mostly needed because an AztecMonster II target has been observed
disconnecting REQUEST SENSE commands and then failing to reselect properly.
Suggested-by: NMichael Schmitz <schmitzmic@gmail.com>
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit dad8261e643849ea134c7cd5c8e794e31d93b9eb ]

The return value is taken to mean "retry" or "don't retry". Change it to bool
to improve readability. Fix related comments. No functional change.
Tested-by: NMichael Schmitz <schmitzmic@gmail.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1aeeeed7f03c576f096eede7b0384f99a98f588c ]

When doing a host reset we should be clearing all outstanding commands, not
just the command triggering the reset.

[mkp: adjusted Hannes' SoB address]
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Cc: Ondrey Zary <linux@rainbow-software.org>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6f3df8c1192c873a6ad9a76328920f6f85af90a8 ]

Support for setting keys for TKIP cipher suite was mistakenly removed
for AP mode. Fix this.

Fixes: 85aeb58c ("iwlwifi: mvm: Enable security on new TX API")
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7126b6f2bbdf8e25f85e7ca6d91d49ea4ce9f6a6 ]

Current FIFO size calculation is wrong for two reasons:
- We access lmac 0 by default
- We don't take 11ax into consideration.
Fix both.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 81f0c66187e1ebb7b63529d82faf7ff1e0ef428a ]

Today, the length of a debug message in iwl_trans_pcie_reclaim
may pass the MAX_MSG_LEN, which is 110.
An example for this kind of message is:

'iwl_trans_pcie_reclaim: Read index for DMA queue txq id (2),
last_to_free 65535 is out of range [0-65536] 2 2.'

Cut the message a bit so it will fit the allowed MAX_MSG_LEN.
Signed-off-by: NGolan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 53f474e6a8d74d5dc0c3a015d889471f9a157685 ]

If the incoming frame should be an A-MSDU, it may already be one,
for example in the case of NAN multicast being encapsulated in an
A-MSDU. Thus, use the GSO algorithm to build A-MSDU only if the
skb actually contains GSO data.

Fixes: 6ffe5de3 ("iwlwifi: pcie: add AMSDU to gen2")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6f68cc367ab6578a33cca21b6056804165621f00 ]

Annotate the compressed BA notification array sizes and
make both of them 0-length since the length of 1 is just
confusing - it may be different than that and the offset
to the second one needs to be calculated in the C code
anyhow.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 84fb372c892e231e9a2ffdaa5c2df52d94aa536c ]

For newer devices we have higher range of periphery
addresses. Currently it is masked out, so we end up
reading another address.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a40287727d9b737e183959fd31a4e0c55f312853 ]

The non-shared antenna was wrong for 22000 device series.
Fix it to ANT_B for correct antenna preference by coex in MVM driver.

Fixes: e34d975e ("iwlwifi: Add a000 HW family support")
Signed-off-by: NErel Geron <erelx.geron@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 79f25b10c9da3dbc953e47033d0494e51580ac3b ]

We can dump data from the firmware either when it crashes,
or when the firmware is alive.
Not all the data is available if the firmware is running
(like the Tx / Rx FIFOs which are available only when the
firmware is halted), so we first check that the firmware
is alive to compute the required size for the dump and then
fill the buffer with the data.

When we allocate the buffer, we test the STATUS_FW_ERROR
bit to check if the firmware is alive or not. This bit
can be changed during the course of the dump since it is
modified in the interrupt handler.

We hit a case where we allocate the buffer while the
firmware is sill working, and while we start to fill the
buffer, the firmware crashes. Then we test STATUS_FW_ERROR
again and decide to fill the buffer with data like the
FIFOs even if no room was allocated for this data in the
buffer. This means that we overflow the buffer that was
allocated leading to memory corruption.

To fix this, test the STATUS_FW_ERROR bit only once and
rely on local variables to check if we should dump fifos
or other firmware components.

Fixes: 04fd2c28 ("iwlwifi: mvm: add rxf and txf to dump data")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3944f139d5592790b70bc64f197162e643a8512b ]

The encryption mode of pkcs1pad never uses out_sg and out_buf, so
there's no need to allocate the buffer, which presently is not even
being freed.

CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: linux-crypto@vger.kernel.org
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NDan Aloni <dan@kernelim.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6c12b6ba45490eeb820fdceccf5a53f42a26799c ]

Fix misalignment of continued argument list.
Signed-off-by: NChristoph Manszewski <c.manszewski@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NKamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5842cd44786055231b233ed5ed98cdb63ffb7db3 ]

Remove a race condition introduced by error path in functions:
s5p_aes_interrupt and s5p_aes_crypt_start. Setting the busy field of
struct s5p_aes_dev to false made it possible for s5p_tasklet_cb to
change the req field, before s5p_aes_complete was called.

Change the first parameter of s5p_aes_complete to struct
ablkcipher_request. Before spin_unlock, make a copy of the currently
handled request, to ensure s5p_aes_complete function call with the
correct request.
Signed-off-by: NChristoph Manszewski <c.manszewski@samsung.com>
Acked-by: NKamil Konieczny <k.konieczny@partner.samsung.com>
Reviewed-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 2f285f46240d67060061d153786740d4df53cd78 ]

A Generation-2 Linux VM on Hyper-V doesn't have the legacy PCI bus, and
users always see the scary warning, which is actually harmless.

Suppress it.
Signed-off-by: NDexuan Cui <decui@microsoft.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: "devel@linuxdriverproject.org" <devel@linuxdriverproject.org>
Cc: Olaf Aepfle <olaf@aepfle.de>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Marcelo Cerri <marcelo.cerri@canonical.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Link: https://lkml.kernel.org/r/ <KU1P153MB0166D977DC930996C4BF538ABF1D0@KU1P153MB0166.APCP153.PROD.OUTLOOK.COM
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7cbfd1e2aad410d96fa6162aeb3f9cff1fecfc58 ]

observed sometimes data is coming with unaligned address from kernel
BT stack. If unaligned address is passed, some data in payload is
stripped when packet is loading to firmware and this results, BT
connection timeout is happening.

sh# hciconfig hci0 up
Can't init device hci0: hci0 command 0x0c03 tx timeout

Fixed this by moving the data to aligned address.
Signed-off-by: NSanjay Kumar Konduri <sanjay.konduri@redpinesignals.com>
Signed-off-by: NSiva Rebbagondla <siva.rebbagondla@redpinesignals.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a5c3021bb62b970713550db3f7fd08aa70665d7e ]

If the remote is not able to fully utilize the MPS choosen recalculate
the credits based on the actual amount it is sending that way it can
still send packets of MTU size without credits dropping to 0.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7cf7846d27bfc9731e449857db3eec5e0e9701ba ]

Clearing HCI_UART_PROTO_READY will avoid usage of proto function pointers
before running the proto close function pointer. There is chance of kernel
crash, due to usage of non proto close function pointers after proto close.
Signed-off-by: NBalakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6aecee6ad41cf97c0270f72da032c10eef025bf0 ]

The dell_rbu driver takes firmware update payloads and puts them in memory so
the system BIOS can find them after a reboot.  This sometimes fails (though
rarely), because the memory containing the payload is in the CPU cache but
never gets written back to main memory before the system is rebooted (CPU
cache contents are lost on reboot).

With this patch, the payload memory will be changed to uncachable to ensure
that the payload is actually in main memory before the system is rebooted.
Signed-off-by: NStuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 016add12977bcc30f77d7e48fc9a3a024cb46645 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]

We observe an oops in the skx_edac module during boot:

  EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
  EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  ...
  EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
  Too many memory controllers: 16
  EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0

We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).

[ bp: This is just a band-aid fix until we've sorted out the whole issue
  with the bus_type association and handling in EDAC and can get rid of
  this arbitrary limit. ]
Signed-off-by: NJustin Ernst <justin.ernst@hpe.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRuss Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 46bdf777685677c1cc6b3da9220aace9da690731 ]

The mlx4 driver produces a link error when it is configured
as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m:

drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap':
main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io'

The same function is called from mlx5, which already has a
dependency to ensure we can call it, and from hns, which
appears to suffer from the same problem.

This adds the same dependency that mlx5 uses to the other two.

Fixes: 6745d356ab39 ("RDMA/hns: Use rdma_user_mmap_io")
Fixes: c282da4109e4 ("RDMA/mlx4: Use rdma_user_mmap_io")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 4a1728cad6340bfbe17bd17fd158b2165cd99508 ]

Mark inode dirty explicitly in the end of recover_inode() to make sure
that all recoverable fields can be persisted later.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f4474aa6e5e901ee4af21f39f1b9115aaaaec503 ]

Testcase to reproduce this bug:
1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd
2. mount -t f2fs /dev/sdd /mnt/f2fs
3. touch /mnt/f2fs/file
4. sync
5. chattr -p 1 /mnt/f2fs/file
6. xfs_io -f /mnt/f2fs/file -c "fsync"
7. godown /mnt/f2fs
8. umount /mnt/f2fs
9. mount -t f2fs /dev/sdd /mnt/f2fs
10. lsattr -p /mnt/f2fs/file

    0 -----------------N- /mnt/f2fs/file

But actually, we expect the correct result is:

    1 -----------------N- /mnt/f2fs/file

The reason is we didn't recover inode.i_projid field during mount,
fix it.
Signed-off-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a4daae5ffea39f5015334e4d18a6a80b447cae4 ]

This is related to
ee70daab ("xfs: update i_size after unwritten conversion in dio completion")

If we update i_size during dio_write, dio_read can read out stale data, which
breaks xfstests/465.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit bfcb79fca19d267712e425af1dd48812c40dec0c ]

If an Endpoint reported an error with ERR_FATAL, we previously ran driver
error recovery callbacks only for the Endpoint's driver.  But if we reset a
Link to recover from the error, all downstream components are affected,
including the Endpoint, any multi-function peers, and children of those
peers.

Initiate the Link reset from the deepest Downstream Port that is
reliable, and call the error recovery callbacks for all its children.

If a Downstream Port (including a Root Port) reports an error, we assume
the Port itself is reliable and we need to reset its downstream Link.  In
all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume
the Link leading to the component needs to be reset, so we initiate the
reset at the parent Downstream Port.

This allows two other clean-ups.  First, we currently only use a Link
reset, which can only be initiated using a Downstream Port, so we can
remove checks for Endpoints.  Second, the Downstream Port where we initiate
the Link reset is reliable (unlike components downstream from it), so the
special cases for error detect and resume are no longer necessary.
Signed-off-by: NKeith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NSinan Kaya <okaya@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 0a715156656bddf4aa92d9868f850aeeb0465fd0 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6323d57f335ce1490d025cacc83fc10b07792130 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ebea2a43fdafdbce918bd7e200b709d6c33b9f3b ]

The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.
Signed-off-by: NMarc Dietrich <marvin24@gmx.de>
Tested-by: NNicolas Chauvet <kwizart@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 503fcd8464fb6cd18073e97dec59b933930655d6 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b38f6aa4b60a1fcc41f5c469981f8f62d6070ee3 ]

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1c997fe4becdc6fcbc06e23982ceb65621e6572a ]

Fix MMC1 cmd pin pull-up causing issues on carrier boards without
external pull-up.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8188391c127ea34d66f37eda6755d0acb51dc600 ]

Commit 6c468f10 ("ARM: dts: tegra: add Tegra20 NAND flash
controller node") introduced the nand-controller node. However, it got
added at the wrong spot not honoring the address order. Fix this.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 564706f65cda3de52b09e51feb423a43940fe661 ]

There was a dot instead of a comma. Fix this.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d9fd22447ba59a9b53a202fade977e82bfba8d8d ]

Tegra194 contains a version of the I2C controller that is no longer
compatible with the version found in Tegra114.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 1c5f335f61ffb838fc3cc1cec9464067663eb8c8 ]

According to Documentation/devicetree/bindings/rtc/rtc-ds1307.txt the
original compatible "maxim,ds1341" is not a valid entry.

Switch to the documented "dallas,ds1341" compatible.
Reported-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NFabio Estevam <festevam@gmail.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Tested-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b739c177e1aeab532f355493439a1901b85be38c ]

dtc has new checks for I2C and SPI buses. Fix the SPI bus node names
and warnings in unit-addresses.

arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@57: I2C bus unit address format error, expected "53"
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: Warning (i2c_bus_reg): /soc/i2c@2180000/eeprom@56: I2C bus unit address format error, expected "52"

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Li Yang <leoyang.li@nxp.com>
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NLi Yang <leoyang.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 3a00dae006623d799266d85f28b5f76ef07d6b6c ]

This local variable is unused, remove it.

Fixes: dea54fba ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>