- 24 4月, 2008 40 次提交
-
-
由 Takashi Iwai 提交于
Fix the initial num_dacs of 92HD71bxx codecs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Move some entries to their proper position so that the list is again sorted by vendor/product ID. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Clemens Ladisch 提交于
Reduce the number of times to check for a non-empty Tx FIFO from 100 to 2 because there is no MPU-401 implementation that needs more than one or two reads to determine the actual FIFO status. Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
-
由 Remy Bruno 提交于
The bits indicating SPDIF frequency in the status register are not the same for the 9632 than for the other cards, because it also supports 192kHz. A specific bitmask has thus been added (used in hdsp_spdif_sample_rate()). The 9632 does not seem to report external sample rates greater than 96kHz. In this case, the best seems to report spdif rate when autosync reference is spdif. This also required to move function hdsp_spdif_sample_rate(). Signed-off-by: NRemy Bruno <remy.bruno@trinnov.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Added logic to check if AUTO_PIN_FRONT_MIC is available for output switch, if AUTO_PIN_MIC isn't. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing descriptions for STAC codec models. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Removed invalid BUG() - the driver should handle the error case properly rather than issuing BUG(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Clean up the pci id table using PCI_DEVICE() macro. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ahmet İnan 提交于
Signed-off-by: Ahmet İnan <ainan <at> mathematik.uni-freiburg.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Some laptops have a internal analog microphone that is not setup by the BIOS. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Added PCI_QUIRKS for laptop that have the 92HDxxx family of codecs. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
STAC_DELL_BIOS quirks were setting the association value wrong for port 0x0f, which prevented it from being included in hp_outs[]. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Matthew Ranostay 提交于
Fix issue on STAC927x codecs that first DAC was getting powered down even if was being used. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jarkko Nikula 提交于
Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a brief description of aw2 driver to ALSA-Configuration.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing declarations for module parameters. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Cedric Bregardis 提交于
Signed-off-by: NCedric Bregardis <cedric.bregardis@free.fr> Signed-off-by: NJean-Christian Hassler <jhassler@free.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When the device has only one input source, it makes no sense to have multiple capture streams. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Initialize the capture source properly for auto model. It's especially important for cases that only mic is detected. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the beep volume control to ALC268 codec support code. Since the codec doesn't return the correct AMP caps, we need to override the value. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Fixed ALC662 recording issue. Signed-off-by: NKailang Yang <kailang@realtek.com.tw> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Clean up the code to define playback/capture streams. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added master volume and switch controls for ca0106 using vmaster. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use a private array for TLV entries of virtual master controls instead of (supposed) static array. This cleans up the existing codes. Also, now vmaster assumes the simple dB-range TLV that is the only type it can handle. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Move the codes for virtual master controls to sound core part so that not only hda-intel drivers can use it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support of 8 channel sound for codecs that are known to work. So far, only ALC850 is marked as a 8ch-support codec. This fix is a modified version of the patch on ALSA BTS#2097 by Martin Ellis: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2097Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Hans-Christian Egtvedt 提交于
This patch adds __devinit to the functions used when probing. Will also reduce the memory footprint a bit if CONFIG_HOTPLUG is not enabled. Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vladimir Barinov 提交于
Add ASoC support for the TI Davinci SoC and the Davicni-EVM reference board. It includes: - ASoC Davinci DMA driver - ASoC Davinci I2S (Davinci McBSP module based) driver - ASoC Davinci-EVM reference board Signed-off-by: NVladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the new model mobile for AD1884A and compatible codecs. It's a reduced version of model=laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support of new AD codecs: AD1883, AD1884A, AD1984A and AD1984B. These are almost compatible except for additional digital pins, etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Liam Girdwood 提交于
This patch adds an ASoC driver for the WM9713 AC97 codec. Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ALC262 must have capsrc_nids defined as well as in ALC882. Also, add a NULL check in alc882_mux_enum_put to avoid Oops. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Libin Yang 提交于
This patch is to add R7xx HDMI audio support. Signed-off-by: NLibin Yang <Libin.yang@amd.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The last patch for fixing the auto-config pin setting breaks the resume due to a wrong use of snd_hda_codec_amp_stereo(). The code in the init hook shouldn't touch the amp cache. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added more known names to the vendor id list. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a new mixer switch to enable/disable the sharing of the default PCM stream with analog and SPDIF outputs. When "IEC958 Default PCM" switch is on, the PCM stream is routed both to analog and SPDIF outputs. This is the behavior in the earlier version. Turning this switch off has a merit for some codecs, though. Some codec chips don't support 24bit formats for SPDIF but only for analog outputs. In this case, you can use 24bit format by disabling this switch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This patch fixes some bugs in the auto-configurator of Realtek codecs: - add missing pin set-up for speaker pins - fix the speaker auto-mute function not to conflict with the existing "Speaker" mixer switch Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In some cases, the BIOS sets up only the HP pins with different assoc and sequence numbers, e.g. on FSC Esprimo with ALC262. This patch adds a fix-up for such a case. When multiple HPs are defined and no line-outs is found, the configurator tries to re-assign some pins from HP list to line-out, judging from the sequence number. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Implemented the auto-mic jack sensing for Samsung laptops with AD1986A codec chip (model=laptop-eapd). The hardware uses pin 0x1d and 0x1f for the internal and external mics, respectively. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Clean up the codes of the capture source selection for Realtek codecs. Now using common helper functions with the new capsrc_nids field. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-