- 16 9月, 2009 1 次提交
-
-
由 Nicolas Pitre 提交于
Due to problems at cam.org, my nico@cam.org email address is no longer valid. FRom now on, nico@fluxnic.net should be used instead. Signed-off-by: NNicolas Pitre <nico@fluxnic.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 9月, 2009 6 次提交
-
-
由 Hiroshi DOYU 提交于
Rewinding each debugfs entries to unregister if an error happens. Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
The omap_device code provides a mapping of omap_hwmod structures into the platform_device system, and includes some details on external (board-level) integration. This allows drivers to enable, idle, and shutdown on-chip device resources, including clocks, regulators, etc. The resources enabled and idled are dependent on the device's maximum wakeup latency constraint (if present). At the moment, omap_device functions are intended to be called from platform_data function pointers. Ideally in the future these functions will be called from either subarchitecture-specific platform_data activate, deactivate functions, or via an custom bus/device type for OMAP. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
-
由 Paul Walmsley 提交于
OMAP SoCs can be considered a collection of hardware IP blocks connected by various interconnects. The bus topology and device integration data is somewhat more complex than platform_device can encode. This patch creates code and structures to manage information about OMAP on-chip devices ("hardware modules") and their integration to the rest of the chip. Hardware module data is intended to be generated dynamically from the TI hardware database for the OMAP4 chips and beyond, easing Linux support for new chip variants. This code currently: - resets and configures all hardware modules upon startup, reducing bootloader dependencies; - provides hooks for Linux driver model code to enable, idle, and shutdown hardware modules (forthcoming patch); - waits for hardware modules to leave idle once their clocks are enabled and OCP_SYSCONFIG bits are set appropriately. - provides a means to pass arbitrary IP block configuration data (e.g., FIFO size) to the device driver (via the dev_attr void pointer) In the future this code is intended to: - estimate interconnect bandwidth and latency characteristics to ensure constraints are satisfied during DVFS - provide *GRPSEL bit data to the powerdomain code - handle pin/ball muxing for devices - generate IO mapping information dynamically - supply device firewall configuration data - provide hardware module data to other on-chip coprocessor software - allow the removal of the "disable unused clocks" code in the OMAP2/3 clock code This patch represents a collaborative effort involving many people from TI, Nokia, and the Linux-OMAP community. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vikram Pandita <vikram.pandita@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Anand Sawant <sawant@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Eric Thomas <ethomas@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
-
由 Paul Walmsley 提交于
Most board-*.c files read configuration data from the bootloader in their .init_machine() function. This needs to happen earlier, at some point before omap2_init_common_hw() is called. This is because a future patch will use the bootloader serial console port information to enable the UART clocks earlier, immediately after omap2_clk_init(). This is in turn necessary since otherwise clock tree usecounts on clocks like dpll4_m2x2_ck will be bogus, which can cause the currently-active console UART clock to be disabled during boot. Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
由 Paul Walmsley 提交于
The interface provides device drivers, CPUFreq, and DSPBridge with a means of controlling OMAP power management parameters that are not yet supported by the Linux PM PMQoS interface. Copious documentation is in the patch in Documentation/arm/OMAP/omap_pm and the interface header file, arch/arm/plat-omap/include/mach/omap-pm.h. Thanks to Rajendra Nayak <rnayak@ti.com> for adding CORE (VDD2) OPP support and moving the OPP table initialization earlier in the event that the clock code needs them. Thanks to Tero Kristo <tero.kristo@nokia.com> for fixing the parameter check in omap_pm_set_min_bus_tput(). Jouni signed off on Tero's patch. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NRajendra Nayak <rnayak@ti.com> Signed-off-by: NTero Kristo <tero.kristo@nokia.com> Signed-off-by: NJouni Högander <jouni.hogander@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Igor Stoppa <igor.stoppa@nokia.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Anand Sawant <sawant@ti.com> Cc: Sakari Poussa <sakari.poussa@nokia.com> Cc: Veeramanikandan Raju <veera@ti.com> Cc: Karthik Dasu <karthik-dp@ti.com>
-
由 Tero Kristo 提交于
Add missing SDRC register offset macros. Signed-off-by: NTero Kristo <tero.kristo@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> [paul@pwsan.com: added commit message] Signed-off-by: NPaul Walmsley <paul@pwsan.com>
-
- 03 9月, 2009 4 次提交
-
-
由 Peter 'p2' De Schrijver 提交于
This patch provides the debugfs entries and a function which will be called by the PM code to register the time spent per domain per state. Also some new fields are added to the powerdomain struct to keep the time information. NOTE: As of v2.6.29, using getnstimeofday() after drivers are suspended is no longer safe since the timekeeping subsystem is also suspended as part of the suspend process. Instead use sched_clock() which on OMAP returns the 32k SYNC timer in nanoseconds. Also, do not print out status for meta powerdomains (dpll*) Signed-off-by: NPeter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: NTero Kristo <tero.kristo@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Peter 'p2' De Schrijver 提交于
Add some infrastructure to easily iterate over clock and power domains. Signed-off-by: NPeter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Peter 'p2' De Schrijver 提交于
This patch provides the infrastructure to count how many times a powerdomain entered a given power state (on, inactive, retention, off). A number of functions are provided which will be called by the chip specific powerdomain and clockdomain code whenever a transition might have happened. Signed-off-by: NPeter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Reddy, Teerth 提交于
This patch changes for setting the padconf value for sys_nirq line which is connected to T2 INTR1. This will fix the T2 keypad wakeup issue on OMAP3 SDP. Signed-off-by: NTeerth Reddy <teerth@ti.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 29 8月, 2009 10 次提交
-
-
由 Vikram Pandita 提交于
For OMAP3 add MMC1 MMC2 pin mux MMC3 mux is not added as there are multiple configurations possible, so the muxing is left to be done in board file. Signed-off-by: NVikram Pandita <vikram.pandita@ti.com> Signed-off-by: NChikkature Rajashekar <madhu.cr@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Hiroshi DOYU 提交于
This enables to peek the following data. $ /debug/iommu/isp# ls mem nr_tlb_entries regs mmap pagetable tlb $ /debug/iommu/isp# head pagetable L: da: pa: ----------------------------------------- 2: 00001000 8ae4a002 2: 00002000 8e7bb002 2: 00003000 8ae49002 2: 00004000 8ae65002 ..... Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Hiroshi DOYU 提交于
The second argument should be the end address, not the length. Actually there will not be any effect on the behavior of this driver since flush_cache_vmap() calls flush_cache_all() in the end. Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Eero Nurkkala 提交于
It is possible for GPIO IRQ lines configured with falling edge triggering only to get IRQs at the rising edge upon the exit of offmode. And vice versa. Prevent such IRQs to arrive by generating the IRQ obeying the detection scheme. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Roger Quadros 提交于
Remove left over code for parsing omap boot tags. This is no longer used. see commit fc0ef1bfa1353e048e055374a09c75320d22231b Signed-off-by: NRoger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kalle Valo 提交于
OMAP tags are deprecrated so drop them. Drop UART config data which decides which UARTs to enable during boot. This is no longer necessary since serial core code disables clocks after inactivity. Background: with new UART idle code, all on-chip UARTs are idled using a configurable inactivity timer (default 5 seconds.) After the inactivity timer, UART clocks are disabled automatically. Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kalle Valo 提交于
Omap tags are deprecated and remove OMAP_TAG_SERIAL_CONSOLE. Console must be enabled with the console boot parameter instead. Signed-off-by: NKalle Valo <kalle.valo@iki.fi> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Remove ifdefs for io.h Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Rename OMAP_MPUIO_BASE to OMAP1_MPUIO_BASE Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Search and replace OMAP_IO_ADDRESS with OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS, and convert omap_read/write into a functions instead of a macros. Also rename OMAP_MPUIO_VBASE to OMAP1_MPUIO_VBASE. In the long run, most code should use ioremap + __raw_read/write instead. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
- 25 8月, 2009 3 次提交
-
-
由 Jarkko Nikula 提交于
Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing to start and stop individually the transmitter and receiver. This cleans up the code in arch/arm/plat-omap/mcbsp.c and in sound/soc/omap/omap-mcbsp.c which was the only user for those removed functions. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Jarkko Nikula 提交于
Use more descriptive than numerical value when showing and storing the McBSP DMA operating mode. Show function is using similar syntax than e.g. the led triggers so that all possible values for store function are printed but with current value surrounded with square brackets. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NEduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Janusz Krzysztofik 提交于
Implement DMA channel self linking on OMAP1510 using AUTO_INIT and REPEAT flags of the DMA CCR register. Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 8月, 2009 13 次提交
-
-
由 Eero Nurkkala 提交于
The device no longer hits retention if element DMA mode is taken for at least the duration of the serial console timeout. Force element DMA mode to shut down through smartidle. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eero Nurkkala 提交于
When no-idle mode is taken, wakeups need not to be enabled. Moreover, CLOCKACTIVITY bits are unnecessary with this mode also. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eero Nurkkala 提交于
FCLK may get autogated so that it prevents the McBSP to work properly. It is the bit 9 that must be set for maintaining the McBSP FCLK. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NJarkko Nikula <jarkko.nikula@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
Configure only XRDYEN and RRDYEN wakeup signals in order to get better power consumption. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eero Nurkkala 提交于
This patch enables the smart idle mode while McBPS is being utilized. Once it's done, force idle mode is taken instead. Apart of it, it also configures what signals will wake mcbsp up. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Peter Ujfalusi 提交于
It adds a new sysfs file, where the user can configure the mcbsp mode to use. If the mcbsp channel is in use, it does not allow the change. Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode, store it, than use it to implement the different modes. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
This patch renames the symbols that handles threshold sysfs properties. This way we can add more sysfs properties to them. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
This patch export through sysfs two properties to configure maximum threshold for transmission and reception on each mcbsp instance. Also, it exports two helper functions to allow mcbsp users to read this values. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
This patch adds a way to handle transmit/receive threshold. It export to mcbsp users a callback registration procedure. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
Increasing startup delay value as worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec Although, 100us may give enough time for two CLKSRG, due to some unknown PM related, clock gating etc. reason, this patch increases it to 500us. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eduardo Valentin 提交于
Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers. Signed-off-by: NEduardo Valentin <eduardo.valentin@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Eero Nurkkala 提交于
ASoC has an annoying bug letting either L or R channel to be played on L channel. In other words, L and R channels can switch at random. This provides McBSP funtionality that may be used to fix this feature. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 8月, 2009 1 次提交
-
-
由 Martin Schwidefsky 提交于
The clocksource structure has two multipliers, the unmodified multiplier clock->mult_orig and the NTP corrected multiplier clock->mult. The NTP multiplier is misplaced in the struct clocksource, this is private information of the timekeeping code. Add the mult field to the struct timekeeper to contain the NTP corrected value, keep the unmodifed multiplier in clock->mult and remove clock->mult_orig. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: NJohn Stultz <johnstul@us.ibm.com> Cc: Daniel Walker <dwalker@fifo99.com> LKML-Reference: <20090814134810.149047645@de.ibm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 10 8月, 2009 2 次提交
-
-
由 Janboe Ye 提交于
commit e85c205a increase vmalloc size. vmalloc space will overlap with OMAP3 sram virtual address. Signed-off-by: NLi Hong Mei <hong-mei.li@motorola.com> Signed-off-by: NJanboe Ye <yuan-bo.ye@motorola.com> Reviewed-by: NPaul Walmsley <paul@pwsan.com>
-
由 Vikram Pandita 提交于
This errata is valid for: OMAP2420 Errata 1.85 Impacts all 2420 ES rev OMAP2430 Errata 1.10 Impacts only ES1.0 Description: DMA may hang when several channels are used in parallel OMAP3430: Not impacted, so remove the errata fix for omap3 Fixed issue reported on cpu_is_omap24xx check reported by Nishant Kamat Signed-off-by: NVikram Pandita <vikram.pandita@ti.com> Reviewed-by: NNishant Kamat <nskamat@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-