- 19 9月, 2009 40 次提交
-
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
increase BULK transfer size from 512 to 8192 to increase wakeups Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Abylay Ospan 提交于
Signed-off-by: NAbylay Ospan <aospan@netup.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Abylay Ospan 提交于
The card uses the same cx23885 gpio lines for two adapters. In case of there is several cards in system we must implement gpio mutex per cx23885 chip. Signed-off-by: NAbylay Ospan <aospan@netup.ru> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Lorin 提交于
- add the Genesys Logic 05e3:0503 and 05e3:f191 webcam Signed-off-by: NOlivier Lorin <o.lorin@laposte.net> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Support for Reddo DVB-C USB TV Box device. Remote is not working yet. Thanks to Benjamin Larsson <banan@ludd.ltu.se> Cc: Benjamin Larsson <banan@ludd.ltu.se> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
add Philips CU1216L NIM Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The VIDIOC_G_STD ioctl may not be present in the case of radio receivers. In that case G_STD will return an error. The v4l1-compat layer should not attempt to propagate that error to the caller, instead it should be ignored. Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Add support for a new HVR-2250 hardware revision Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Ensure the HVR-2200 second tuner is configured in slave mode. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Minor i2c assignment cleanup Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Remove meaningless if'0 code Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Ensure that by default all tuners are set correctly to master/slave mode. For all HVR2250's, ensure slave based tuners are caliberated during attach to avoid locking problems on tuner# above channel 91. HVR2200 tuner attach time to be reviewed in a future patch. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Removed spurious debug Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
In some cases we're seeing large timeouts on commands. I'm changing the implementation so that the deferred worker checks the PCI bus for any messages and signals the waiting caller accordingly. The previous mechanism was too unreliable. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
The firmware typically responds in < 50ms and, via the interrupts and deferred work queue the caller (blocked in the driver) is signalled very efficiently. In a highly stressed system this can take many multiples of seconds. So, we need a larger maximum timeout for busy systems. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Cleanup a printk and output two helpful driver params in debug mode. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
It's timing out and aborting firmware load too quickly on some platforms, this increases the upper limit. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Email address change Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Adjust I/F's to the TDA10048 enabling DVB-T lock Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
SAA7164: Fix some 32/64bit compile time warnings Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
This patch adds support for all of the known shipping Hauppauge HVR-2200 and HVR-2250 boards. Digital TV ATSC/QAM and DVB-T is enabled at this time. Both tuners are supported. Volatiles and typedefs need rework, the rest is coding style compliant. Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Steven Toth 提交于
Add the SAA7164 I2C bus identifier Signed-off-by: NSteven Toth <stoth@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
That was weird: on some distros, we need to remove <reference> tag for it to work. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This is a proprietary format found with Trident tm6000 series of chipsets. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Adds ISDB-T_and_ISDB-Tsb_with_S2API spec converted into DocBook format. The text is authored by Patrick Boettcher, and was converted to DocBook by me. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
This patch is fixing the initialization of the channel search parameters. Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-