this patch is mostly cleanup of scx200_gpio :
- drop #include <linux/config.h>
- s/DEVNAME/DRVNAME/    apparently a convention
- replace variable num_pins with  #define MAX_PINS
- s/dev/devid/   to clarify that its a dev_t, not a struct device dev.
- move devid = MKDEV(major,0)  into branch where its needed.

2 minor 'changes' :

- reduced MAX_PINS from 64 to 32.  Ive never tested other pins, and
  theyre all multiplexed with other functions, some of which may be in use
  on my soekris 4801, so I dont know what testing should yield.

- +EXPORT_SYMBOL(scx200_access);

  This exposes the driver's vtable, which another driver can use along
  with #include <linux/nsc_gpio.h>, to manipulate a gpio-pin.

Signed-off-by  Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Christoph Hellwig:
open_softirq just enables a softirq.  The softirq array is statically
allocated so to add a new one you would have to patch the kernel.  So
there's no point to keep this export at all as any user would have to
patch the enum in include/linux/interrupt.h anyway.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NMike Miller <mike.miller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When CONFIG_RT_MUTEX_TESTER is enabled kernel refuses to suspend the
machine because it's unable to freeze the rt-test-* threads.

Add try_to_freeze() after schedule() so that the threads will be freezed
correctly; I've tested the patch and it lets the notebook suspends and
resumes nicely.
Signed-off-by: NLuca Tettamanti <kronos.it@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The delete partition IOCTL takes the bd_mutex for both the disk and the
partition; these have an obvious hierarchical relationship and this patch
annotates this relationship for lockdep.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add support for the I2C-attached Intersil ISL1208 RTC chip.

[akpm@osdl.org: cleanups, fixlets]
Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make the ramdisk blocksize configurable at kernel compilation time rather
than only at boot or module load time, like a couple of the other ramdisk
options.  I found this handy awhile back but thought little of it, until
recently asked by a few of the testing folks here to be able to do the same
thing for their automated test setups.

The Kconfig comment is largely lifted from comments in rd.c, and hopefully
this will increase the chances of making folks aware that the default value
often isn't a great choice here (for increasing values of PAGE_SIZE, even
moreso).
Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The default ramdisk blocksize is actually 1024, not 512 bytes.  Also fixes
up some trailing whitespace issues.
Signed-off-by: NNathan Scott <nathans@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nommu.c needs to export two more symbols for drivers to use:
remap_pfn_range and unmap_mapping_range.
Signed-off-by: NLuke Yang <luke.adi@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's no excuse for userspace abusing this kernel header -- the kernel's
headers are not intended to provide a library of helper routines for
userspace.  Using <asm/io.h> from userspace is broken on most architectures
anyway.  Just say 'no'.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This isn't suitable for userspace to see -- the kernel headers are not a
random library of stuff for userspace; they're only there to define the
kernel<->user ABI for system libraries and tools.  Anything which _was_
abusing asm/atomic.h from userspace was probably broken anyway -- as it often
didn't even give atomic operation.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove asm/irq.h from the exported headers -- there was never any good reason
for it to have been listed.
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Relax the CPU in the del_timer_sync() busywait loop.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the now-unneeded kthread_stop_sem().
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Got a customer bug report (https://bugzilla.novell.com/190296) about kernel
symbols longer than 127 characters which end up in a string buffer that is
not NULL terminated, leading to garbage in /proc/kallsyms.  Using strlcpy
prevents this from happening, even though such symbols still won't come out
right.

A better fix would be to not use a fixed-size buffer, but it's probably not
worth the trouble.  (Modversion'ed symbols even have a length limit of 60.)

[bunk@stusta.de: build fix]
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up whitespace and return syntax in os.h.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On top of the previous biarch changes for UML, this makes the preprocessor
changes a bit cleaner.  Specify the 64-bit build in CPPFLAGS on the x86_64
SUBARCH, rather than #undef'ing i386.  Compile-tested with i386 and x86_64
SUBARCHs.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The UML_SETJMP macro was requiring its users to pass in a argument which it
could supply itself, since it wasn't used outside that invocation of the
macro.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

On i386, the user space accessor functions copy_from/to_user() both invoke
might_sleep(), do a quick sanity check, and then pass the work on to their
__copy_from/to_user() counterparts, which again invoke might_sleep().
Given that no actual work happens between these two calls, it is best to
eliminate one of the redundant might_sleep()s.
Signed-off-by: NVadim Lobanov <vlobanov@speakeasy.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes the foolish assumption that SMP implied local apics.
That assumption is not-true on the Voyager subarch.  This makes that
dependency explicit, and allows the code to build.

What gets disabled is just an optimization to get better crash dumps so the
support should work if there is a kernel that will initialization on the
voyager subarch under those harsh conditions.

Hopefully we can figure out how to initialize apics in init_IRQ and remove
the need to disable io_apics and this dependency.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NCatalin Marinas <catalin.marinas@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

handle_BUG() tries to print file and line number even when they're not
available (CONFIG_DEBUG_BUGVERBOSE is not set.) Change this to print a
message stating info is unavailable instead of printing a misleading
message.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a race condition that showed up in a threaded JIT environment.
The situation is that a process with a JIT code page forks, so the page is
marked read-only, then some threads are created in the child.  One of the
threads attempts to add a new code block to the JIT page, so a
copy-on-write fault is taken, and the kernel allocates a new page, copies
the data, installs the new pte, and then calls lazy_mmu_prot_update() to
flush caches to make sure that the icache and dcache are in sync.
Unfortunately, the other thread runs right after the new pte is installed,
but before the caches have been flushed.  It tries to execute some old JIT
code that was already in this page, but it sees some garbage in the i-cache
from the previous users of the new physical page.

Fix: we must make the caches consistent before installing the pte.  This is
an ia64 only fix because lazy_mmu_prot_update() is a no-op on all other
architectures.
Signed-off-by: NAnil Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__vunmap must not rely on area->nr_pages when picking the release methode
for area->pages.  It may be too small when __vmalloc_area_node failed early
due to lacking memory.  Instead, use a flag in vmstruct to differentiate.
Signed-off-by: NJan Kiszka <jan.kiszka@web.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Avoid bogus out of memory errors: fix sa_query to actually pass gfp_mask
supplied by the user to idr_pre_get.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Acked-by: N"Sean Hefty" <mshefty@ichips.intel.com>
Acked-by: N"Roland Dreier" <rdreier@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ib_fmr_pool_map_phys gets the virtual address by pointer but never writes
there, and users (e.g.  srp) seem to assume this and ignore the value
returned.  This patch cleans up the API to get the VA by value, and updates
all users.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set private data length for reject messages to the correct size.  Fix from
openib svn r8483.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

srp_unmap_data assumes req->fmr is NULL if the request is not mapped, so we
must clean it out in case of an error.
Signed-off-by: NVu Pham <vu@mellanox.com>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The device address contains unsigned character arrays, which contain raw GID
addresses.  The GIDs may not be naturally aligned, so do not cast them to
structures or unions.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If a user of the IB CM returns -ENOMEM from their connection callback, simply
drop the incoming REQ - do not attempt to send a reject.  This should allow
the sender to retry the request.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After recent changes, mthca_wq_init does not actually initialize the WQ as it
used to - it simply resets all index fields to their initial values.  So,
let's rename it to mthca_wq_reset.
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Acked-by: NZach Brown <zach.brown@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

mthca_ah_query returs the static rate of the address handle in internal mthc
format.  fix it to use rate encoding from enum ib_rate, which is what users
expect.
Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

2.6.16 leaks like hell. While testing, I found massive leakage
(reproduced in openvz) in:

*filp
*size-4096

And 1 object leaks in
*size-32
*size-64
*size-128

It is the fix for the first one.  filp leaks in the bowels of namei.c.

Seems, size-4096 is file table leaking in expand_fdtables.

I have no idea what are the rest and why they show only accompanying
another leaks.  Some debugging structs?

[akpm@osdl.org, Trond: remove the IS_ERR() check]
Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: <stable@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clearign all of i_mode was a bit draconian. We only really care about
S_ISUID/ISGID, after all.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We have a bad interaction with both the kernel and user space being able
to change some of the /proc file status.  This fixes the most obvious
part of it, but I expect we'll also make it harder for users to modify
even their "own" files in /proc.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (53 commits)
  [MIPS] sparsemem: fix crash in show_mem
  [MIPS] vr41xx: Update workpad setup function
  [MIPS] vr41xx: Update e55 setup function
  [MIPS] vr41xx: Removed old v2.4 VRC4173 driver
  [MIPS] vr41xx: Move IRQ numbers to asm-mips/vr41xx/irq.h
  [MIPS] MIPSsim: Build fix, rename sim_timer_setup -> plat_timer_setup.
  [MIPS] Remove unused code.
  [MIPS] IP22 Fix brown paper bag in RTC code.
  [MIPS] Atlas, Malta, SEAD: Don't disable interrupts in mips_time_init().
  [MIPS] Replace board_timer_setup function pointer by plat_timer_setup.
  [MIPS] Nuke redeclarations of board_time_init.
  [MIPS] Remove redeclarations of setup_irq().
  [MIPS] Nuke redeclarations of board_timer_setup.
  [MIPS] Print out TLB handler assembly for debugging.
  [MIPS] SMTC: Reformat to Linux style.
  [MIPS] MIPSsim: Delete redeclaration of ll_local_timer_interrupt.
  [MIPS] IP27: Reformatting.
  [MIPS] IP27: Invoke setup_irq for timer interrupt so proc stats will be shown.
  [MIPS] IP27: irq_chip startup method returns unsigned int.
  [MIPS] IP27: struct irq_desc member handler was renamed to chip.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] CIFS_DEBUG2 depends on CIFS

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Change SDHCI version error to a warning
  [MMC] Fix incorrect register access

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] 8250: sysrq deadlock fix
  [SERIAL] 8250: add tsi108 serial support
  [SERIAL] IP22: fix serial console hangs
  [SERIAL] dz: Fix compilation error

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] arch/arm/kernel/bios32.c: no need to set isa_bridge
  [ARM] 3729/3: EABI padding rules necessitate the packed attribute of floatx80
  [ARM] 3725/1: sharpsl_pm: warn about wrong temperature
  [ARM] 3723/1: collie charging
  [ARM] 3728/1: Restore missing CPU Hotplug irq helper
  [ARM] 3727/1: fix ucb initialization on collie
  [ARM] Allow Versatile to be built for AB and PB
  [ARM] 3726/1: update {ep93xx,ixp2000,ixp23xx,lpd270,onearm} defconfigs to 2.6.18-rc1
  [ARM] 3721/1: Small cleanup for locomo.c