When connector is created, if connector->polled is
DRM_CONNECTOR_POLL_CONNECT then drm_kms_helper_hotplug_event
function isn't called at drm_helper_hpd_irq_event because the
function will be called only in case of DRM_CONNECTOR_POLL_HPD.

So this patch sets always DRM_CONNECTOR_POLL_HPD flag to
connector->polled of parallel panel driver at connector creation.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

This patch adds component framework support to resolve
the probe order issue.

Until now, exynos drm had used codes specific to exynos drm
to resolve that issue so with this patch, the specific codes
are removed.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Signed-off-by: NInki Dae <inki.dae@samsung.com>

If any fimd channel was already active, initializing iommu will result
in a PAGE FAULT (e.e. u-boot could have turned on the display and
not disabled it before the kernel starts). This patch checks if any
channel is active before initializing iommu and disables it.
Signed-off-by: NAkshu Agrawal <akshu.a@samsung.com>
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

In the case of that only one branch of a conditional statement is
a single statement, braces are added to both branches.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Make local symbols static, because these are used only in this
file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Make local symbole static, because this is used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Exynos drm driver cannot support DRIVER_HAVE_IRQ feature because it uses
driver specific one instead of routine of drm framework to
install/uninstall irq handler.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

AFAICT, the fb_base of a drm_device's mode_config is never used.  It isn't
accessed by core drm, it isn't used by fbmem, and it isn't exposed to user
space.

Furthermore, it is probably supposed to be a physical address, not the
dma address mapped to the display controller, so this is just wrong.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Kernel access to the eyxnos fbdev framebuffer is via its gem object's
kernel mapping (kvaddr, stored in info->screen_base).

User space access is provided by mmap(), read() and write() of /dev/fb/fb0.
These functions also only use screen_base/screen_size().

Therefore, it is not necessary to set fix->smem_{start,len} or
fix->mmio_{start,len} fields.

This avoids leaking kernel, physical and dma mapped addresses to user
space via the ioctls FBIOGET_VSCREENINFO and FBIOGET_FSCREENINFO.
Signed-off-by: NDaniel Kurtz <djkurtz@chromium.org>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This adds an encoder type for DP MST encoders.
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes drm_get_encoder_name() thread safe.

Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01\
.ptsecurity.ru
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This makes drm_get_connector_name() thread safe.

[airlied: fix to build.]

Reference: http://lkml.kernel.org/r/645ee6e22cad47d38a2b35c21c8d5fe3@DC1-MBX-01.ptsecurity.ruSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 9dc40560 (drm/dp: let drivers specify the name of the I2C-
over-AUX adapter) introduced a new field but didn't add the proper
kernel-doc for it.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

shmem_read_mapping_page() uses mapping_gfp_mask(mapping) as default gfp
mask. No reason to use shmem_read_mapping_page_gfp() directly if we want
the default behavior.
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

shmem supports page-relocations during swapin since quite some time. It
was implemented in:

    commit bde05d1c
    Author: Hugh Dickins <hughd@google.com>
    Date:   Tue May 29 15:06:38 2012 -0700

        shmem: replace page if mapping excludes its zone

The gem-comment about wrongly placed DMA32 pages is no longer valid.
Replace it with a proper comment but keep the BUG_ON() to verify correct
shmem behavior.
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This issue was reported by coccicheck using the semantic patch
at scripts/coccinelle/api/memdup.cocci
Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The shmobile DRM driver is only useful on SuperH and shmobile unless
build testing. I am dropping the SuperH dependencies though because
the driver doesn't even build there, so in practice it is an arm-only
driver for now.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The Renesas R-Car Display Unit driver is only useful on shmobile
unless build testing. The LVDS output is useful on an even more
reduced hardware set.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DRM is pretty much the main user of this stuff (if we ignore the sysfs
interface used by X, i.e. by the same gang of people writing the drm
drivers). So shovel it into Dave's responsibility to avoid patches
getting lost on lkml.

With this get_maintainers will rout vgaarb and switcheroo patches
correctly.

Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: linux-kernel@vger.kernel.org
References: https://lkml.org/lkml/2014/5/25/94Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Started documenting drm properties for drm drivers. This patch provides
information about properties in drm, i915, psb and cdv/gma-500. Information
about other properties can be added on top of these.

v2: Added description of drm properties in armada, exynos, i2c/ch7006, noveau,
omap, qxl, radeon, rcar-du

v3: Removed "Property Object" column since it is implementation related. Property
type column refined.[Ville's review comments]

v4: Removed whitespace warnings and minor nits. [Randy's review comments]

v5: Restructured output for ENUM properties

v6: Review comments on formatting the table. [Laurent's review comments]

v7: Minor restructuring. [Laurent's review comments]

Cc: Rob Landley <rob@landley.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Sagar Kamble <sagar.a.kamble@intel.com>
Cc: "Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com>
Cc: linux-doc@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NSagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The kerneldoc header of ttm_bo_create() was referring to another
(nonexisting) function and had a few obsolete or incorrect arguments.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The 800x600 (SVGA) screen resolution was lacking in the set of
built-in selectable EDID screen resolutions that can be used to
repair misbehaving monitor firmware.

This patch adds the related data set and expands the documentation.
Note that the SVGA bit occupies a different byte to all the existing
users of the established timing bits forcing a rework of the
ESTABLISHED_TIMINGS_BITS macro.

Tested new EDID on an aged (and misbehaving) industrial LCD panel;
existing EDIDs still pass edid-decode's checksum checks.
Signed-off-by: NDaniel Thompson <daniel.thompson@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: linux-doc@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix spelling typo in DocBook/drm.tmpl
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This just adds the defines from the DP 1.2 spec, which we
will use later.

fix some DP MST to 1.2 MST
Signed-off-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>

Pull in latest updates to AST driver.

* 'ast-updates' of ssh://people.freedesktop.org/~/linux:
  drm/ast: initial DP501 support (v0.2)
  drm/ast: rename the mindwm/moutdwm and deinline them
  drm/ast: resync the dram post code with upstream
  drm/ast: add AST 2400 support.
  drm/ast: add widescreen + rb modes from X.org driver (v2)

This is the initial attempt at porting the DP501 code from the userspace
driver,

the firmware file is in
http://people.freedesktop.org/~airlied/ast_dp501_fw.bin

this should really be exposed as another encoder/connector that is cloneable

v0.2:
init 3rd tx properly,
add scratch reduction of VRAM size
backup firmware properly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

we'll need these elsewhere for dp501.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This resyncs the dram post code with the upstream X.org driver
where ast have improved the code for setting up the dram chips.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is ported from the userspace driver.

Untested on any ast2400 hw so far.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This syncs up the mode code from the X.org driver upstream,
and adds the mode validation step for hw that doesn't have
widescreen.

v2: (from Egbert Eich <eich@suse.de)
squash drm/ast: Use correct structure member for mode validation
to avoid bisect regression.

In struct drm_display_mode crtc_hdisplay and crtc_vdisplay are holding
the crtc parameters after mode fixup. For validation we need hdisplay and
vdisplay.
Signed-off-by: NEgbert Eich <eich@suse.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- ring init improvements (Chris)
- vebox2 support (Zhao Yakui)
- more prep work for runtime pm on Baytrail (Imre)
- eDram support for BDW (Ben)
- prep work for userptr support (Chris)
- first parts of the encoder->mode_set callback removal (Daniel)
- 64b reloc fixes (Ben)
- first part of atomic plane updates (Ville)

* tag 'drm-intel-next-2014-05-06' of git://anongit.freedesktop.org/drm-intel: (75 commits)
  drm/i915: Remove useless checks from primary enable/disable
  drm/i915: Merge LP1+ watermarks in safer way
  drm/i915: Make sure computed watermarks never overflow the registers
  drm/i915: Add pipe update trace points
  drm/i915: Perform primary enable/disable atomically with sprite updates
  drm/i915: Make sprite updates atomic
  drm/i915: Support 64b relocations
  drm/i915: Support 64b execbuf
  drm/i915/sdvo: Remove ->mode_set callback
  drm/i915/crt: Remove ->mode_set callback
  drm/i915/tv: Remove ->mode_set callback
  drm/i915/tv: Rip out pipe-disabling nonsense from ->mode_set
  drm/i915/tv: De-magic device check
  drm/i915/tv: extract set_color_conversion
  drm/i915/tv: extract set_tv_mode_timings
  drm/i915/dvo: Remove ->mode_set callback
  drm/i915: Make encoder->mode_set callbacks optional
  drm/i915: Make primary_enabled match the actual hardware state
  drm/i915: Move ring_begin to signal()
  drm/i915: Virtualize the ringbuffer signal func
  ...

Update pull request with drm core patches. Mostly some polish for the
primary plane stuff and a pile of patches all over from Thierry. Has
survived a few days in drm-intel-nightly without causing ill.

I've frobbed my scripts a bit to also tag my topic branches so that you
have something stable to pull - I've accidentally pushed a bunch more
patches onto this branch before you've taken the old pull request.

* tag 'topic/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
  drm: Make drm_crtc_helper_disable() return void
  drm: Fix indentation of closing brace
  drm/dp: Fix typo in comment
  drm: Fixup flip-work kerneldoc
  drm/fb: Fix typos
  drm/edid: Cleanup kerneldoc
  drm/edid: Drop revision argument for drm_mode_std()
  drm: Try to acquire modeset lock on panic or sysrq
  drm: remove unused argument from drm_open_helper
  drm: Handle ->disable_plane failures correctly
  drm: Simplify fb refcounting rules around ->update_plane
  drm/crtc-helper: gc usless connector loop in disable_unused_functions
  drm/plane_helper: don't disable plane in destroy function
  drm/plane-helper: Fix primary plane scaling check
  drm: make mode_valid callback optional
  drm/edid: Fill PAR in AVI infoframe based on CEA mode list

This mode group id_list was never being freed.

v2: take David's suggestion to free in minor_free.
Signed-off-by: NDave Airlie <airlied@redhat.com>

We won't be calling intel_enable_primary_plane() or
intel_disable_primary_plane() with the primary plane in the
wrong state. So remove the useless DISPLAY_PLANE_ENABLE checks.

v2: Convert the checks to WARNs instead (Daniel,Paulo)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On ILK when we disable a particular watermark level, we must
maintain the actual watermark values for that level for some time
(until the next vblank possibly). Otherwise we risk underruns.

In order to achieve that result we must merge the LP1+ watermarks a
bit differently since we must also merge levels that are to be
disabled. We must also make sure we don't overflow the fields in the
watermark registers in case the calculated watermarks come out too
big to fit.

As early as possbile we mark all computed watermark levels as
disabled if they would exceed the register maximums. We make sure
to leave the actual watermarks for such levels zeroed out. Then during
merging, we take the maxium values for every level, regardless if
they're disabled or not. That may seem a bit pointless since at the
moment all the watermark levels we merge should have their values
zeroed if the level is already disabled. However soon we will be
dealing with intermediate watermarks that, in addition to the new
watermark values, also contain the previous watermark values, and so
levels that are disabled may no longer be zeroed out.

v2: Split the patch in two (Paulo)
    Use if() instead of & when merging ->enable (Paulo)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Fix commit message as noted by Paulo.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When we calculate the watermarks for a pipe make sure we leave any
level fully zeroed out if it would exceed any of the maximum values
that fit in the registers.

This will be important later when we start to use also disabled
watermark levels during LP1+ merging.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add trace points for observing the atomic pipe update mechanism.

v2: Rebased due to earlier changes
v3: Pass intel_crtc instead of drm_crtc (Daniel)
v4: Pass frame counter from the caller to evaded/end since
    the caller now always has that ready
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NSourab Gupta <sourabgupta@gmail.com>
Reviewed-by: NAkash Goel <akash.goels@gmail.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>