- 06 3月, 2014 1 次提交
-
-
由 Sakari Ailus 提交于
The timestamp_type field used to contain only the timestamp type. Soon it will be used for timestamp source flags as well. Rename the field accordingly. [m.chehab@samsung.com: do the change also to drivers/staging/media and at s2255] Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 18 12月, 2013 18 次提交
-
-
由 Jacek Anaszewski 提交于
Whereas S5PC210 device produces decoded JPEG subsampling values that map on V4L2_JPEG_CHROMA_SUBSAMPLNG values, the Exynos4x12 device doesn't. This patch adds helper function s5p_jpeg_to_user_subsampling, which performs suitable translation. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Exynos4x12 has limitations regarding setting chroma subsampling of an output JPEG image. It cannot be lower than the subsampling of the raw source image. Also in case of V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY option the source image fourcc has to be V4L2_PIX_FMT_GREY. This patch implements try_ctrl callback containing mechanism that prevents setting invalid value of the V4L2_CID_JPEG_CHROMA_SUBSAMPLING control. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
When output queue fourcc is set to any flavour of YUV, the V4L2_CID_JPEG_CHROMA_SUBSAMPLING control value as well as its in-driver cached counterpart have to be updated with the subsampling property of the format so as to be able to provide correct information to the user space and preclude setting an illegal subsampling mode for Exynos4x12 encoder. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Exynos4x12 supports wider scope of subsampling modes than S5PC210. Adjust corresponding mask accordingly. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Adjust capture format to the Exynos4x12 device limitations, according to the subsampling value parsed from the source JPEG image header. If the capture format was set to YUV with subsampling lower than the one of the source JPEG image the decoding process would not succeed. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Make s5p_jpeg_parse_hdr function capable of parsing "YCbCr subsampling" field of a jpeg file header. Store the parsed value in the context. The information about source JPEG subsampling is required to make validation of destination format possible, which must be conducted for exynos4x12 device as the decoding process will not succeed if the destination format is set to YUV with subsampling lower than the one of the source JPEG image. With this knowledge the driver can adjust the destination format appropriately. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Add hardware API for the exynos4x12 on s5p-jpeg. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Move function definitions from jpeg-hw.h to jpeg-hw-s5p.c, add "s5p" prefix and put function declarations in the jpeg-hw-s5p.h. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
This patch adds proper initialization of the in-driver cached state of JPEG controls with V4L2 core. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
s5p_jpeg_device_run and s5p_jpeg_runtime_resume callbacks should have spin_lock protection as they alter device registers. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Standard suspend/resume path is called after runtime resume of the given device, so suspend/resume callbacks must do all clock management done also by runtime pm to allow for proper power domain shutdown. Moreover, JPEG clock is enabled from probe function but is is not necessary. This patch also moves control of jpeg clock to runtime_pm callbacks. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Aligning capture queue image dimensions while enqueuing output queue doesn't make a sense as the S_FMT ioctl might have not been called for the capture queue until that moment, whereas it is required to know capture format as the type of alignment heavily depends on it. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
The aim of the condition is ensuring that the bytesperline value set by the user space application is proper for the given format and adjusting it if isn't. As the depth value of the format description entry is expressed in bits then the bytesperline value needs to be divided, not multiplied, by that value to get the number of bytes required to store single line of image samples. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Output samples during decoding phase for the YUV 4:2:0 format are arranged in the manner compatible with 2-planar NV12, not 3-planar YUV420 fourcc. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Jacek Anaszewski 提交于
Reorder quantization tables so that their elements are arranged in the manner reflecting compression quality level that is in accordance with V4L2 documentation, i.e. the larger value of the V4L2_CID_JPEG_COMPRESSION_QUALITY control the better image quality, and thus lower compression quality. The modification allows also to get rid of reverse logic in the s_ctrl callback while assigning user space value to the ctx->compr_quality variable. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Sylwester Nawrocki 提交于
This patch enables the JPEG codec on S5PV210 and Exynos4210 SoCs. There are some differences in newer versions of the JPEG codec IP on SoCs like Exynos4x12 and Exynos5 series and support for them will be added in subsequent patches. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
由 Seung-Woo Kim 提交于
It is hard to distinguish between decoder and encoder video device because their names are same. So this patch fixes the names. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 05 12月, 2013 1 次提交
-
-
由 Sylwester Nawrocki 提交于
Simplify the driver by using the m2m ioctl and vb2 helpers. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 25 9月, 2013 1 次提交
-
-
由 Jacek Anaszewski 提交于
This patch fixes regression introduced in commit 5c77879f "[media] v4l2-dev: add new VFL_DIR_ defines" caused by not initializing the vfl_dir field of the vfd_decoder instance of struct video_device, after the field was introduced. It precluded calling the driver's ioctls which require vfl_dir not to be equal to VFL_DIR_RX which is defined as 0 and uninitialized vfl_dir field is interpreted as such. In effect the test in the v4l_s_fmt function failed for the ioctls that expect is_tx to be false, which prevented the ioctl callbacks registered by the driver from being called. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
-
- 25 4月, 2013 1 次提交
-
-
由 Kamil Debski 提交于
Since the introduction of the timestamp_type field, it is necessary that the driver chooses which type it will use. This patch adds support for the timestamp_type. Signed-off-by: NKamil Debski <k.debski@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 2月, 2013 1 次提交
-
-
由 Thierry Reding 提交于
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 1月, 2013 1 次提交
-
-
由 Thierry Reding 提交于
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 06 10月, 2012 1 次提交
-
-
由 Thomas Abraham 提交于
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 02 10月, 2012 1 次提交
-
-
由 Sachin Kamat 提交于
Silences the following warning: WARNING: sizeof *ctx should be sizeof(*ctx) Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 26 9月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 15 9月, 2012 1 次提交
-
-
由 Ezequiel García 提交于
queue_init() is always called by v4l2_m2m_ctx_init(), which allocates a context struct v4l2_m2m_ctx with kzalloc. Therefore, there is no need to clear vb2_queue src/dst structs. Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 16 8月, 2012 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
The remaining drivers are mostly platform drivers. Name the dir to reflect it. It makes sense to latter break it into a few other dirs. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 10 8月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
Add proper locking to the file operations, allowing for the removal of the V4L2_FL_LOCK_ALL_FOPS flag. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 7月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch adds new V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capability flags that are intended to be used for memory-to-memory (M2M) devices, instead of ORed V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT. V4L2_CAP_VIDEO_M2M flag is added at the drivers, CAPTURE and OUTPUT capability flags are left untouched and will be removed in future, after a transition period required for existing applications to be adapted to check only for V4L2_CAP_VIDEO_M2M. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NKamil Debski <k.debski@samsung.com> Acked-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 7月, 2012 2 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch drops the _ACTIVE part from the selection target names as a prerequisite to unify the selection target names across the subdev and regular video node API. The meaning of V4L2_SEL_TGT_*_ACTIVE and V4L2_SUBDEV_SEL_TGT_*_ACTUAL selection targets is logically the same. Different names add to confusion where both APIs are used in a single driver or an application. For some system configurations different names may lead to interoperability issues. For backwards compatibility V4L2_SEL_TGT_CROP_ACTIVE and V4L2_SEL_TGT_COMPOSE_ACTIVE are defined as aliases to V4L2_SEL_TGT_CROP and V4L2_SEL_TGT_COMPOSE. These aliases will be removed after deprecation period, according to Documentation/feature-removal-schedule.txt. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NSakari Ailus <sakari.ailus@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sachin Kamat 提交于
module_platform_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 5月, 2012 2 次提交
-
-
由 Sachin Kamat 提交于
devm_* functions are used to replace kzalloc, request_mem_region, ioremap and request_irq functions in probe call. With the usage of devm_* functions explicit freeing and unmapping is not required. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Sachin Kamat 提交于
Makes the function s5p_jpeg_g_selection static (detected by sparse). Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 5月, 2012 1 次提交
-
-
由 Hans Verkuil 提交于
This used to be the default if the lock pointer was set, but now that lock is by default only used for ioctl serialization. Those drivers that already used core locking have this flag set explicitly, except for some drivers where it was obvious that there was no need to serialize any file operations other than ioctl. The drivers that didn't need this flag were: drivers/media/radio/dsbr100.c drivers/media/radio/radio-isa.c drivers/media/radio/radio-keene.c drivers/media/radio/radio-miropcm20.c drivers/media/radio/radio-mr800.c drivers/media/radio/radio-tea5764.c drivers/media/radio/radio-timb.c drivers/media/video/vivi.c sound/i2c/other/tea575x-tuner.c The other drivers that use core locking and where it was not immediately obvious that this flag wasn't needed were changed so that the flag is set together with a comment that that driver needs work to avoid having to set that flag. This will often involve taking the core lock in the fops themselves. Eventually this flag should go and it should not be used in new drivers. There are a few reasons why we want to avoid core locking of non-ioctl fops: in the case of mmap this can lead to a deadlock in rare situations since when mmap is called the mmap_sem is held and it is possible for other parts of the code to take that lock as well (copy_from_user()/copy_to_user() perform a down_read(&mm->mmap_sem) when a page fault occurs). It is very unlikely that that happens since the core lock serializes all fops, but the kernel warns about it if lock validation is turned on. For poll it is also undesirable to take the core lock as that can introduce increased latency. The same is true for read/write. While it was possible to make flags or something to turn on/off taking the core lock for each file operation, in practice it is much simpler to just not take it at all except for ioctl and leave it to the driver to take the lock. There are only a handful fops compared to the zillion ioctls we have. I also wanted to make it obvious which drivers still take the lock for all fops, so that's why I chose to have drivers set it explicitly. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 08 3月, 2012 1 次提交
-
-
由 Andrzej Pietrasiewicz 提交于
Adapt to new controls (subsampling). For encoding, the destination format now needs to be set to V4L2_PIX_FMT_JPEG and the subsampling (4:2:2 or 4:2:0) needs to be set using the respective control (V4L2_CID_JPEG_CHROMA_SUBSAMPLING). Required buffer size for destination image during encoding is no longer deduced from the format (which generally implied overestimation), but needs to be given from userspace in sizeimage. Not strictly related to the added controls, this patch also fixes setting the subsampling of the destination image for decoding, depending on the destination format. Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 02 3月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch replaces VIDIOC_S/G_JPEGCOMP ioctl handlers with V4L2_CID_JPEG_QUALITY control. Additionally it enables JPEG subsampling and the restart interval configuration through V4L2_CID_JPEG_SUBSAMPLING and V4L2_CID_JPEG_RESTART_INTERVAL controls. For the decoder video node only V4L2_CID_JPEG_SUBSAMPLING is available as a read-only control. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 01 3月, 2012 1 次提交
-
-
由 Sylwester Nawrocki 提交于
This patch is a prerequisite for per file handle control handlers. Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 1月, 2012 1 次提交
-
-
由 Marek Szyprowski 提交于
queue_setup callback has been extended with struct v4l2_format *fmt parameter in 2d86401c commit. This patch adds this parameter to s5p-jpeg driver. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-