- 30 5月, 2013 3 次提交
-
-
由 Vladimir Kondratiev 提交于
WMI commands wants channel index, that is channel - 1 Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 29 5月, 2013 5 次提交
-
-
由 Alexander Bondar 提交于
Add debugfs files to control powersave parameters for testing. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Hila Gonen 提交于
The firmware supports periodic keep alive and beacon monitoring, so advertise connection monitor offload capability by setting IEEE80211_HW_CONNECTION_MONITOR flag. Implement missed beacons notification handler. Call ieee80211_beacon_loss in case of missed beacons, so AP probing by mac80211 can be triggered. Signed-off-by: NHila Gonen <hila.gonen@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
I forgot to take them from TLV and took them from the NVM instead. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Alexander Bondar 提交于
If skip over DTIMs is enabled the driver can specify number of DTIMs to skip. This parameter in host-device API implies number of DTIM periods to skip. For example, to skip one DTIM means sleep over two DTIM periods. Change semantics accordingly. Change this parameter's default value. Signed-off-by: NAlexander Bondar <alexander.bondar@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eytan Lifshitz 提交于
In order to avoid NIC destruction due to high temperature, CT kill will power down the NIC. To avoid this, thermal throttling will decrease throughput to prevent the NIC from reaching the temperature at which CT kill is performed. Signed-off-by: NEytan Lifshitz <eytan.lifshitz@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 27 5月, 2013 9 次提交
-
-
由 Johannes Berg 提交于
Make the current WoWLAN configuration available to drivers at runtime. This isn't really useful for the normal WoWLAN behaviour and accessing it can also be racy, but drivers may use it for testing the WoWLAN device behaviour while the host stays up & running to observe the device. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
It was set to be FORCED because of a firmware bug which has been fixed. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: NIlan Peer <ilan.peer@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Conflicts: drivers/net/wireless/iwlwifi/mvm/ops.c
-
由 Alexander Bondar 提交于
Beacon abort is used by device to increase idle dwell time when system is idle. This algorithm is on top of beacon filtering feature. Enable beacon abort only if power management is enabled. Signed-off-by: NAlexander Bondar <alexander.bondar@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The pointer that gets used is already const, so the structs can obviously be const as well. Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
There are a number of parameters that aren't really hardware specific but rather define how the DVM firmware is used. Move these into the DVM configuration. Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The next patches will move some more configuration data that isn't needed by mvm into this struct, so rename it now since it won't just be ops. Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The MVM firmware doesn't communicate this way, it instead assumes D3 configuration is complete after a specific host command (which must be last) has been sent. Handling this bit thus belongs into the firmware API code, i.e. DVM. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Reviewed-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
-
由 Emmanuel Grumbach 提交于
In 63b77bf4 iwlwifi: dvm: don't send zeroed LQ cmd I tried to avoid to send zeroed LQ cmd, but I made a (very) stupid mistake in the memcmp. Since this patch has been ported to stable, the fix should go to stable too. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=58341 Cc: stable@vger.kernel.org Reported-by: NHinnerk van Bruinehsen <h.v.bruinehsen@fu-berlin.de> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 25 5月, 2013 23 次提交
-
-
由 Johannes Berg 提交于
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
By making all the API functions require wdev locking we can clean up the API a bit, getting rid of the locking version of each function. This also decreases the size of cfg80211 by a small amount. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The reg_mutex is similar to the ones I just removed in cfg80211 but even less useful since it protects global data, and we hold the RTNL in all places (except module unload) already. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Since it just does a quick check of the last regulatory request, the function doesn't have to hold the reg mutex but can use RCU instead. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
If the driver for some reason successfully finishes scanning while in p2p_stop_device(), cfg80211 will still set it to aborted. Simplify this code using the new 'notified' value and only mark it aborted in case the driver didn't notify cfg80211 at all (in which case we also leak the request to not crash, this is a driver bug.) Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Using separate locks in cfg80211 and mac80211 has always caused issues, for example having to unlock in places in mac80211 to call cfg80211, which even needed a framework to make cfg80211 calls after some functions returned etc. Additionally, I suspect some issues people have reported with the cfg80211 state getting confused could be due to such issues, when cfg80211 is asking mac80211 to change state but mac80211 is in the process of telling cfg80211 that the state changed (in another way.) Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
There's no need to lock, we can just use an atomic_t. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
The function is only used and needed by the wext code for scanning, so move it there. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
-
由 Ashok Nagarajan 提交于
Move mandatory rates calculation to cfg80211, shared with non mac80211 drivers. Signed-off-by: NAshok Nagarajan <ashok@cozybit.com> [extend documentation] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Ashok Nagarajan 提交于
As estab_plinks is not a statistics member, don't show its debug information along with other mesh stat members Signed-off-by: NAshok Nagarajan <ashok@cozybit.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Jouni Malinen 提交于
VHT uses peer AID in the PARTIAL_AID field in TDLS frames. The current design for TDLS is to first add a dummy STA entry before completing TDLS Setup and then update information on this STA entry based on what was received from the peer during the setup exchange. In theory, this could use NL80211_ATTR_STA_AID to set the peer AID just like this is used in AP mode to set the AID of an association station. However, existing cfg80211 validation rules prevent this attribute from being used with set_station operation. To avoid interoperability issues between different kernel and user space version combinations, introduce a new nl80211 attribute for the purpose of setting TDLS peer AID. This attribute can be used in both the new_station and set_station operations. It is not supposed to be allowed to change the AID value during the lifetime of the STA entry, but that validation is left for drivers to do in the change_station callback. Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Nishant Sarmukadam 提交于
The firmware hang issue is not seen very often, though it is still seen sometimes (once in 12 hours in local tests). The changes in the driver ,to interrupt the firmware, are needed when we detect that firmware is stuck and when the host queues are full and we begin to drop packets. This is to ensure that the firmware does not miss any PPA_RDY interrupts to cause the firmware restart dont miss PPA_READY interrupt for SC2 Signed-off-by: NNishant Sarmukadam <nishants@marvell.com> Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wei Yongjun 提交于
Use kfree_skb() instead of kfree() to free sk_buff. Introduced by commit e270045b (wil6210: Sanity check for reported DMA length) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Create helper function and move initialization to subroutines. Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <stf_xl@wp.pl> Acked-by: NHelmut Schaa <helmut.schaa@googlemail.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-