Both were defined as 23 rsp. 52 though the mentissa is actually a bit more
than the fraction.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

LONG_LONG_MAX is a symbol defined in <limits.h> which may not be available
so better rely on something provided by a kernel header.  While at it,
turn these function-like macros into inline functions.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

And another bunch of #ifdefs bite the dust.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

No usable functionality and nothig does ever define IEEE854_XP anyway.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Most of these tests should be runtime tests.  This also finally means
that on a MIPS III systems MIPS IV opcodes are going to result in an
exception as they're supposed to.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The header file had no include guards; this only happened to work because
the file only contains macro definitions and protypes.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

It was relying on other headers having been included before.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Optimizes the code flow and shaves of half a percent of the math-emu
code size.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Union _ieee754sp was even duplicated even though there are no endian
dependencies in it all.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Pull sound fixes from Takashi Iwai:
 "Unfortunately this update became bigger than previous pull requests,
  which is almost a pattern in rc5-6.  But, the only obvious big changes
  are for the new Intel DSP ASoC drivers, so the impact must be fairly
  limited.

  Other than that, usual small fixes in various fields: HD-audio, ASoC
  core and ASoC fsl and codec drivers"

* tag 'sound-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: sb_mixer: missing return statement
  ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile
  ASoC: Intel: Fix Baytrail SST DSP firmware loading
  ALSA: hda - mask buggy stream DMA0 for Broadwell display controller
  ALSA: hda - Add new GPU codec ID to snd-hda
  ASoC: fsl_esai: Set PCRC and PRRC registers at the end of hw_params()
  ASoC: fsl_esai: Only bypass sck_div for EXTAL source
  ASoC: fsl_esai: Fix incorrect condition within ratio range check for FP
  ASoC: dapm: Fix SUSPEND -> OFF bias sequence
  ASoC: dapm: Skip CODEC<->CODEC links in connect_dai_link_widgets()
  ASoC: pcm: Fix incorrect condition check for case SNDRV_PCM_TRIGGER_SUSPEND
  ALSA: hda - add headset mic detect quirks for three Dell laptops
  ASoC: Update Cirrus Logic CODEC maintainers.
  ASoC: Intel: Fix block offset calculations.
  ASoC: Intel: Fix check for pdata usage before dereference.
  ASoC: Intel: Fix stream position pointer.
  ASoC: Intel: Fix allow hw_params to be called more than once.
  ASoC: Intel: Fix Audio DSP usage when IOMMU is enabled.
  ASoC: Intel: Fix Haswell/Broadwell DSP page table creation.
  ASoC: Intel: Fix allocated block list usage when adding blocks.
  ...

Pull MIPS fixes from Ralf Baechle:
 "MIPS fixes for various loose ends:

   - Fix workarounds for R4000 erratum.
   - Patch up DEC, Siemens-Nixdorf and Loongson hardware support.
   - Wire up renameat2 syscall.
   - Delete unused file - it was causing false warnings from maintenance
     scripts.
   - Revert a patch because it's functionality is now implemented twice
     which causes superfluous /proc/cpuinfo output.
   - Fix a microMIPS regression"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: mm: Fix broken microMIPS kernel regression.
  MIPS: Add new AUDIT_ARCH token for the N32 ABI on MIPS64
  MIPS: Wire up renameat2 syscall.
  MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD.
  MIPS: Remove file missed when removing rm9k support a while ago.
  MIPS/loongson2_cpufreq: Fix CPU clock rate setting
  MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ
  MIPS: csum_partial.S CPU_DADDI_WORKAROUNDS bug fix
  MIPS: __strncpy_from_user_asm CPU_DADDI_WORKAROUNDS bug fix
  MIPS: __delay CPU_DADDI_WORKAROUNDS bug fix
  MIPS: DEC/SNI: O32 wrapper stack switching fixes
  MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes
  MAINTAINERS: TURBOchannel: Update entry
  Revert "MIPS: MT: proc: Add support for printing VPE and TC ids"

Pull parisc fixes from Helge Deller:
 "There are two patches in here:

  The first patch greatly improves latency and corrects the memory
  ordering in our light-weight atomic locking syscall.

  The second patch ratelimits printing of userspace segfaults in the
  same way as it's done on other platforms.  This fixes a possible DOS
  on parisc since it prevents the syslog to grow too fast.  For example,
  when the debian acl2 package was built on our debian buildd servers,
  this package produced lots of gigabytes in syslog in very short time
  and thus filled our harddisks, which then turned the server nearly
  completely unaccessible and unresponsive"

* 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Improve LWS-CAS performance
  parisc: ratelimit userspace segfault printing

Pull two arm64 fixes from Catalin Marinas:
 - arm64 migrate_irqs() fix following commit ffde1de6 (irqchip: Gic:
   Support forced affinity setting)
 - fix arm64 pud_huge() to return 0 when only 2 levels page tables are
   used (__PAGETABLE_PMD_FOLDED defined and pmd_huge already covers
   block entries at the first level), otherwise KVM gets confused

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: fix pud_huge() for 2-level pagetables
  arm64: use cpu_online_mask when using forced irq_set_affinity

Pull Metag architecture and related fixes from James Hogan:
 "Mostly fixes for metag and parisc relating to upgrowing stacks.

   - Fix missing compiler barriers in metag memory barriers.
   - Fix BUG_ON on metag when RLIMIT_STACK hard limit is increased
     beyond safe value.
   - Make maximum stack size configurable.  This reduces the default
     user stack size back to 80MB (especially on parisc after their
     removal of _STK_LIM_MAX override).  This only affects metag and
     parisc.
   - Remove metag _STK_LIM_MAX override to match other arches and follow
     parisc, now that it is safe to do so (due to the BUG_ON fix
     mentioned above).
   - Finally now that both metag and parisc _STK_LIM_MAX overrides have
     been removed, it makes sense to remove _STK_LIM_MAX altogether"

* tag 'metag-for-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  asm-generic: remove _STK_LIM_MAX
  metag: Remove _STK_LIM_MAX override
  parisc,metag: Do not hardcode maximum userspace stack size
  metag: Reduce maximum stack size to 256MB
  metag: fix memory barriers

Pull drm/intel fixes from Dave Airlie:
 "Just some intel fixes.

  I have some radeon ones but I need to get some patches dropped from
  the pull req"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Increase WM memory latency values on SNB
  drm/i915: restore backlight precision when converting from ACPI
  drm/i915: Use the first mode if there is no preferred mode in the EDID
  drm/i915/dp: force eDP lane count to max available lanes on BDW
  drm/i915/vlv: reset VLV media force wake request register
  drm/i915/SDVO: For sysfs link put directory and target in correct order
  drm/i915: use lane count and link rate from VBT as minimums for eDP
  drm/i915: clean up VBT eDP link param decoding
  drm/i915: consider the source max DP lane count too

Pull x86 fixes from Peter Anvin.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, modify_ldt: Make support for 16-bit segments a runtime option
  x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow()
  x86, rdrand: When nordrand is specified, disable RDSEED as well

Pull timer fix from Thomas Gleixner:
 "A single bug fix for a long standing issue:

   - Updating the expiry value of a relative timer _after_ letting the
     idle logic select a target cpu for the timer based on its stale
     expiry value is outright stupid.  Thanks to Viresh for spotting the
     brainfart"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Set expiry time before switch_hrtimer_base()

Pull irq fixes from Thomas Gleixner:
 "Two small updates from the irq departement:

   - Provide missing inline stub for a SMP only function

   - Add sub-maintainer for the drivers/irqchip/ part of the irq
     subsystem.  YAY!"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  MAINTAINERS: Add co-maintainer for drivers/irqchip
  genirq: Provide irq_force_affinity fallback for non-SMP

Intel fixes for regressions, black screens and hangs, for 3.15.

* tag 'drm-intel-fixes-2014-05-16' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Increase WM memory latency values on SNB
  drm/i915: restore backlight precision when converting from ACPI
  drm/i915: Use the first mode if there is no preferred mode in the EDID
  drm/i915/dp: force eDP lane count to max available lanes on BDW
  drm/i915/vlv: reset VLV media force wake request register
  drm/i915/SDVO: For sysfs link put directory and target in correct order
  drm/i915: use lane count and link rate from VBT as minimums for eDP
  drm/i915: clean up VBT eDP link param decoding
  drm/i915: consider the source max DP lane count too

The following happens when trying to run a kvm guest on a kernel
configured for 64k pages. This doesn't happen with 4k pages:

  BUG: failure at include/linux/mm.h:297/put_page_testzero()!
  Kernel panic - not syncing: BUG!
  CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF            3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1
  Call trace:
  [<fffffe0000096034>] dump_backtrace+0x0/0x16c
  [<fffffe00000961b4>] show_stack+0x14/0x1c
  [<fffffe000066e648>] dump_stack+0x84/0xb0
  [<fffffe0000668678>] panic+0xf4/0x220
  [<fffffe000018ec78>] free_reserved_area+0x0/0x110
  [<fffffe000018edd8>] free_pages+0x50/0x88
  [<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40
  [<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44
  [<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184
  [<fffffe00000a1938>] kvm_vm_release+0x10/0x1c
  [<fffffe00001edc1c>] __fput+0xb0/0x288
  [<fffffe00001ede4c>] ____fput+0xc/0x14
  [<fffffe00000d5a2c>] task_work_run+0xa8/0x11c
  [<fffffe0000095c14>] do_notify_resume+0x54/0x58

In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page()
on the stage2 pgd which leads to the BUG in put_page_testzero(). This
happens because a pud_huge() test in unmap_range() returns true when it
should always be false with 2-level pages tables used by 64k pages.
This patch removes support for huge puds if 2-level pagetables are
being used.
Signed-off-by: NMark Salter <msalter@redhat.com>
[catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # v3.11+

The attached change significantly improves the performance of the LWS-CAS code
in syscall.S.
This allows a number of packages to build (e.g., zeromq3, gtest and libxs)
that previously failed because slow LWS-CAS performance under contention. In
particular, interrupts taken while the lock was taken degraded performance
significantly.

The change does the following:

1) Disables interrupts around the CAS operation, and
2) Changes the loads and stores to use the ordered completer, "o", on
PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is
accepted on both PA 1.X and 2.0.

The use of ordered loads and stores probably makes no difference on all
existing hardware, but it seemed pedantically correct. In particular, the CAS
operation must complete before LDCW lock is released. As written before, a
processor could reorder the operations.

I don't believe the period interrupts are disabled is long enough to
significantly increase interrupt latency. For example, the TLB insert code is
longer. Worst case is a memory fault in the CAS operation.
Signed-off-by: NJohn David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: NHelge Deller <deller@gmx.de>

Ratelimit printing of userspace segfaults and make it runtime
configurable via the /proc/sys/debug/exception-trace variable. This
should resolve syslog from growing way too fast and thus prevents
possible system service attacks.
Signed-off-by: NHelge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 3.13+

On SNB the BIOS provided WM memory latency values seem insufficient to
handle high resolution displays.

In this particular case the display mode was a 2560x1440@60Hz, which
makes the pixel clock 241.5 MHz. It was empirically found that a memory
latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS
provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec
is what the typical BIOS provided values are on IVB systems.

Increase the WM memory latency values to at least 1.2 usec on SNB.
Hopefully this won't have a significant effect on power consumption.

v2: Increase the latency values regardless of the pixel clock

Cc: Robert N <crshman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254Tested-by: NRobert Navarro <crshman@gmail.com>
Tested-by: NVitaly Minko <vitaly.minko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

When we set backlight on behalf of ACPI opregion, we will convert the
backlight value in the 0-255 range defined in opregion to the actual
hardware level. Commit 22505b82 (drm/i915: avoid brightness overflow
when doing scale) is meant to fix the overflow problem when doing the
conversion, but it also caused a problem that the converted hardware
level doesn't quite represent the intended value: say user wants maximum
backlight level(255 in opregion's range), then we will calculate the
actual hardware level to be: level = freq / max * level, where freq is
the hardware's max backlight level(937 on an user's box), and max and
level are all 255. The converted value should be 937 but the above
calculation will yield 765.

To fix this issue, just use 64 bits to do the calculation to keep the
precision and avoid overflow at the same time.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491Reported-by: NNico Schottelius <nico-bugzilla.kernel.org@schottelius.org>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

This matches the algorithm used by earlier kernels when selecting the
mode for the fbcon. And only if there is no modes at all, do we fall
back to using the BIOS configuration. Seamless transition is still
preserved (from the BIOS configuration to ours) so long as the BIOS has
also chosen what we hope is the native configuration.
Reported-by: NKnut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NKnut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
[Jani: applied Chris' "Please imagine that I wrote this correctly."]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

There are certain BDW high res eDP machines that regressed due to

commit 38aecea0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Mar 3 11:18:10 2014 +0100

    drm/i915: reverse dp link param selection, prefer fast over wide again

The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at
2.7 Gbps on the affected machines. Link training succeeded for both, but
the screen remained blank with the former config. Further investigation
showed that 4 lanes at 5.4 Gbps worked also.

The root cause for the blank screen using 2 lanes remains unknown, but
apparently the driver for a certain other operating system by default
uses the max available lanes. Follow suit on Broadwell eDP, for at least
until we figure out what is going on.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Tested-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>