Some sal/pal calls would be traped to kvm for virtulization
from guest firmware.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

process.c mainly handle interruption injection, and some faults handling.
Signed-off-by: NAnthony Xu <anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

asm-offsets.c will generate offset values used for assembly code
for some fileds of special structures.
Signed-off-by: NAnthony Xu <anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

optvfault.S Add optimization for some performance-critical
virtualization faults.
Signed-off-by: NAnthony Xu <anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

vcpu.c provides processor virtualization logic for kvm.
Signed-off-by: NAnthony Xu <anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

trampoline code targets for guest/host world switch.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

mmio.c includes mmio decoder, and related mmio logics.
Signed-off-by: NAnthony Xu <Anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

vmm_ivt.S includes an ivt for vmm use.
Signed-off-by: NAnthony Xu <anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

vtlb.c includes tlb/VHPT virtulization.
Signed-off-by: NAnthony Xu <anthony.xu@intel.com>
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

vmm.c adds the interfaces with kvm/module, and initialize global data area.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm_minstate.h : Marcos about Min save routines.
lapic.h: apic structure definition.
vcpu.h : routions related to vcpu virtualization.
vti.h  : Some macros or routines for VT support on Itanium.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm_ia64.c is created to handle kvm ia64-specific core logic.
Signed-off-by: NXiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp.
Signed-off-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

- remove unused 'irq' argument from pfm_do_interrupt_handler()

- remove pointless cast to void*

- add KERN_xxx prefix to printk()

- remove braces around singleton C statement

- in tioce_provider.c, start tioce_dma_consistent() and
  tioce_error_intr_handler() function declarations in column 0

This change's main purpose is to prepare for the patchset in
jgarzik/misc-2.6.git#irq-remove, that explores removal of the
never-used 'irq' argument in each interrupt handler.
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

There are many notify_die() and almost all take same style with
ia64_mca_spin().  This patch defines macros and replace them all,
to reduce lines and to improve readability.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

There are 3 hooks in MCA handler, but this DIE_MCA_MONARCH_PROCESS
event does not notified other than for the first monarch.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

While testing with CONFIG_VIRT_CPU_ACCOUNTING=y, I found that
I occasionally get very huge system time in some threads.

So I dug the issue and finally noticed that it was caused
because of an interrupt which interrupt in the following window:

> [arch/ia64/kernel/entry.S: (!CONFIG_PREEMPT && CONFIG_VIRT_CPU_ACCOUNTING)]
>
> ENTRY(ia64_leave_syscall)
>    :
> (pUStk) rsm psr.i
>         cmp.eq pLvSys,p0=r0,r0          // pLvSys=1: leave from syscall
> (pUStk) cmp.eq.unc p6,p0=r0,r0          // p6 <- pUStk
> .work_processed_syscall:
>         adds r2=PT(LOADRS)+16,r12
> (pUStk) mov.m r22=ar.itc                        // fetch time at leave
>         adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
>         ;;
> <<< window: from here >>>
> (p6)    ld4 r31=[r18]  // load current_thread_info()->flags
>         ld8 r19=[r2],PT(B6)-PT(LOADRS)
>         adds r3=PT(AR_BSPSTORE)+16,r12
>         ;;
>         mov r16=ar.bsp
>         ld8 r18=[r2],PT(R9)-PT(B6)
> (p6)    and r15=TIF_WORK_MASK,r31  // any work other than TIF_SYSCALL_TRACE?
>         ;;
>         ld8 r23=[r3],PT(R11)-PT(AR_BSPSTORE)
> (p6)    cmp4.ne.unc p6,p0=r15, r0               // any special work pending?
> (p6)    br.cond.spnt .work_pending_syscall
>         ;;
>         ld8 r9=[r2],PT(CR_IPSR)-PT(R9)
>         ld8 r11=[r3],PT(CR_IIP)-PT(R11)
> (pNonSys) break 0 // bug check: we shouldn't be here if pNonSys is TRUE!
>         ;;
>         invala
> <<< window: to here >>>
>         rsm psr.i | psr.ic // turn off interrupts and interruption collection

If pUStk is true, it means we are going to return user mode, hence we fetch
ar.itc to get time at leave from system.
It seems that it is not possible to interrupt the window if pUStk is true,
because interrupts are disabled early.  And also disabling interrupt makes
sense because it is safe for referring current_thread_info()->flags.

However interrupting the window while pUStk is true was possible.
The route was:
ia64_trace_syscall
-> .work_pending_syscall_end
-> .work_processed_syscall
Only in case entering the window from this route, interrupts are enabled
during in the window even if pUStk is true.  I suppose interrupts must be
disabled here anyway if pUStk is true.
I'm not sure but afraid that what kind of bad effect were there, other
than crazy system time which I found.

FYI, there was a commit 6f6d7582 that
points out a bug at same point(exit of ia64_trace_syscall) in 2006.
It can be said that there was an another bug.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - does not check for a NULL dev pointer
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>

None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>

Semaphores are no longer performance-critical, so a generic C
implementation is better for maintainability, debuggability and
extensibility.  Thanks to Peter Zijlstra for fixing the lockdep
warning.  Thanks to Harvey Harrison for pointing out that the
unlikely() was unnecessary.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>

http://bugzilla.kernel.org/show_bug.cgi?id=10124

this change:

      commit 08f1c192
      Author: Muli Ben-Yehuda <muli@il.ibm.com>
      Date:   Sun Jul 22 00:23:39 2007 +0300

         x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata

         This patch introduces struct pci_sysdata to x86 and x86-64, and
         converts the existing two users (NUMA, Calgary) to use it.

         This lays the groundwork for having other users of sysdata, such as
         the PCI domains work.

         The Calgary bits are tested, the NUMA bits just look ok.

replaces pcibios_scan_root by pci_scan_bus_parented...

but in pcibios_scan_root we have a check about scanned busses.

Cc: <yakui.zhao@intel.com>
Cc: Stian Jordet <stian@jordet.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch fixes the problem that kdump by INIT does not work if we use
makedumpfile. The problem is that after INIT is issued, 2nd kernel
starts and makedumpfile fails with the following error message.

/proc/vmcore doesn't contain vmcoreinfo.
'-x' or '-i' must be specified.

makedumpfile Failed.

The cause of this problem is that kernel does not call
crash_save_vmcoreinfo. When kdump starts by panic or sysrq-trigger,
crash_save_vmcoreinfo is called by crash_kexec. But this function is not
called when kdump starts by INIT. The Attached patch fixes this.

This patch just adds crash_save_vmcoreinfo into machine_kdump_on_init so
that crash_save_vmcoreinfo can be called when kdump starts by INIT.
I tested this patch with linux-2.6.25-rc9 and I confirmed it worked.
Signed-off-by: NTakao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

There is a NUMA memory configuration issue in 2.6.24:

A 2-node machine of ours has got the following memory layout:

Node 0:	0 - 2 Gbytes
Node 0:	4 - 8 Gbytes
Node 1:	8 - 16 Gbytes
Node 0:	16 - 18 Gbytes

"efi_memmap_init()" merges the three last ranges into one.

"register_active_ranges()" is called as follows:

efi_memmap_walk(register_active_ranges, NULL);

i.e. once for the 4 - 18 Gbytes range. It picks up the node
number from the start address, and registers all the memory for
the node #0.

"register_active_ranges()" should be called as follows to
make sure there is no merged address range at its entry:

efi_memmap_walk(filter_memory, register_active_ranges);

"filter_memory()" is similar to "filter_rsvd_memory()",
but the reserved memory ranges are not filtered out.
Signed-off-by: NZoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Untangle the chaos of page size determination in this function by
simply using PAGE_SIZE << compound_order().
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The functions time_before, time_before_eq, time_after, and time_after_eq are
more robust for comparing jiffies against other values.

So use the time_after() & time_before() macros, defined at linux/jiffies.h,
which deal with wrapping correctly

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NS.Caglar Onur <caglar@pardus.org.tr>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

show_mem() has no need to print the amount of free swap space manually because
show_free_areas() does this already and is called by the former.

The two outputs only differ in text formatting:

  printk("Free swap  = %lukB\n", ...);
  printk("Free swap:       %6ldkB\n", ...);
Signed-off-by: NJohannes Weiner <hannes@saeurebad.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

IA64's IOMMU implementation allocates memory areas spanning LLD's segment
boundary limit.  It forces low level drivers to have a workaround to adjust
scatter lists that the IOMMU builds.

We are in the process of making all the IOMMUs respect the segment boundary
limits to remove such work around in LLDs.  This patch is for IA64's IOMMU.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Add kprobe-booster support on ia64.

Kprobe-booster improves the performance of kprobes by eliminating single-step,
where possible.  Currently, kprobe-booster is implemented on x86 and x86-64.
This is an ia64 port.

On ia64, kprobe-booster executes a copied bundle directly, instead of single
stepping.  Bundles which have B or X unit and which may cause an exception
(including break) are not executed directly.  And also, to prevent hitting
break exceptions on the copied bundle, only the hindmost kprobe is executed
directly if several kprobes share a bundle and are placed in different slots.
Note: set_brl_inst() is used for preparing an instruction buffer(it does not
modify any active code), so it does not need any atomic operation.
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: bibo,mao <bibo.mao@intel.com>
Cc: Rusty Lynch <rusty.lynch@intel.com>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The sys_getpid() and sys_set_tid_address() behavior changed from

	return current->tgid

to

	struct pid *pid;
	pid = current->pids[PIDTYPE_PID].pid;
	return pid->numbers[pid->level].nr;

But the fast system calls on ia64 still operate the old way.  Patch them
appropriately to let ia64 work with pid namespaces.  Besides, this is one more
step in deprecating of pid and tgid on task_struct.

The fsys_getppid() is to be patched as well, but its logic is much
more complex now, so I will make it later.

One thing I'm not 100% sure is the trick with the IA64_UPID_SHIFT.  On order
to access the pid->level's element of an array I have to perform the following
calculations

	pid + sizeof(struct upid) * pid->level

The problem is that ia64 can only multiply float point registers, while all
the offsets I have in code are in rXX ones.  Fortunately, the sizeof(struct
upid) is 32 bytes on ia64 (and is very unlikely to ever change), so the
calculations get simpler:

	pid + pid->level << 5

So, I introduce the IA64_UPID_SHIFT and use the shl instruction.  I also
looked at how gcc compiles the similar place and found that it makes it with
shift as well.  Is this OK to do so?

Tested with ski emulator with 2.6.24 kernel, but fits 2.6.25-rc4 and
2.6.25-rc4-mm1 as well.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Cc: David Mosberger-Tang <davidm@hpl.hp.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

In arch/ia64/sn/kernel/xpc_{main,partition}.c
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NTony Luck <tony.luck@intel.com>

do_each_thread/while_each_thread is a double loop, so
should use 'goto' rather than 'break' to break out
the loop.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

One should normally unlock in the reverse order of the lock calls,
and in this case there certainly is no reason not to.
Signed-off-by: NAlan D. Brunelle <alan.brunelle@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Fix indenting of switch statement to follow Documentation/CodingStyle.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

While it is convenient that we can invoke kdump by asserting INIT
via button on chassis etc., there are some situations that invoking
kdump on fatal MCA is not welcomed rather than rebooting fast without
dump.

This patch adds a new flag 'kdump_on_fatal_mca' that is independent
from 'kdump_on_init' currently available.  Adding this flag enable
us to turning on/off of kdump depend on the event, INIT and/or fatal
MCA.  Default for this flag is to take the dump.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This attached patch significantly shrinks boot memory allocation on ia64.
It does this by not allocating per_cpu areas for cpus that can never
exist.

In the case where acpi does not have any numa node description of the
cpus, I defaulted to assigning the first 32 round-robin on the known
nodes..  For the !CONFIG_ACPI  I used for_each_possible_cpu().
Signed-off-by: NRobin Holt <holt@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

A simple fix.  The existing pernodesize reservation is not taking into
account a second array of pg_data_t structures.  This is normally not
important because the PAGE_ALIGN macro reserves adequate space.

I made the compute_pernodesize steps in the same order as the fill_pernode
steps to make the correlation more clear.
Signed-off-by: NRobin Holt <holt@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

This replaces simscsi_fillresult with scsi_sg_copy_from_buffer.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The patch defines kernel parameter "nptcg=". The parameter overrides max number
of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

According to SDM2.2, Itanium supports multiple outstanding ptc.g instructions.
But current kernel function ia64_global_tlb_purge() uses a spinlock to serialize
ptc.g instructions issued by multiple processors. This serialization might have
scalability issue on a big SMP machine where many processors could purge TLB
in parallel.

The patch fixes this problem by issuing multiple ptc.g instructions in
ia64_global_tlb_purge(). It also adds support for the "PALO" table to get
a platform view of the max number of outstanding ptc.g instructions (which
may be different from the processor view found from PAL_VM_SUMMARY).

PALO specification can be found at: http://www.dig64.org/home/DIG64_PALO_R1_0.pdf

spinaphore implementation by Matthew Wilcox.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>