- 07 12月, 2007 23 次提交
-
-
由 Liam R. Howlett 提交于
Similar to mutex_lock_interruptible, it can be interrupted by a fatal signal only. Signed-off-by: NLiam R. Howlett <howlett@gmail.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Replacing lock_page with lock_page_killable in do_generic_mapping_read() allows us to kill `cat' of a file on an NFS-mounted filesystem Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
This routine is like lock_page, but can be interrupted by a fatal signal Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Like signal_pending, but it's only true for signals which are fatal to this process Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Set TASK_WAKEKILL for TASK_STOPPED and TASK_TRACED, add TASK_KILLABLE and use TASK_WAKEKILL in signal_wake_up() Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Also restructure the loop in do_wait() Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Also move wake_up_locked() to be with the related functions Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
With the changes to support TASK_KILLABLE, ->state becomes a bitmask, and moving these tests to convenience macros will fix all the users. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
-
由 Matthew Wilcox 提交于
Replace the uses of __wake_up_locked with wake_up_locked Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Oprofile: Fix computation of number of counters. [MIPS] Alchemy: fix IRQ bases [MIPS] Alchemy: replace ffs() with __ffs() [MIPS] BCM1480: Fix interrupt routing, take 2.
-
由 Linus Torvalds 提交于
Make the Kconfig.instrumentation file a bit easier on the eyes, and use the new ARCH_SUPPORTS_OPROFILE for x86[-64]. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ralf Baechle 提交于
The cleanup 09cadedb broke the oprofile configuration for MIPS by allowing oprofile support to be built for kernel models where oprofile doesn't have a chance in hell to work. Just a dependecy list on a number of architectures is - surprise - broken and should as per past discussions probably in most considered to be broken in most cases. So I introduce a dependency for the oprofile configuration on ARCH_SUPPORTS_OPROFILE. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ralf Baechle 提交于
VSMP kernels will split the available performance counters between the two processors / cores. But don't do this when we're not on a VSMP system ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Do what the commits commits f3e8d1da and 9d360ab4 failed to achieve -- actually convert the Alchemy code to irq_cpu. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix havoc wrought by commit 56f621c7 -- au_ffs() and ffs() are equivalent, that patch should have just replaced one with another. Now replace ffs() with __ffs() which returns an unbiased bit number. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 06 12月, 2007 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: futex: correctly return -EFAULT not -EINVAL lockdep: in_range() fix lockdep: fix debug_show_all_locks() sched: style cleanups futex: fix for futex_wait signal stack corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: VM/Security: add security hook to do_brk Security: round mmap hint address above mmap_min_addr security: protect from stack expantion into low vm addresses Security: allow capable check to permit mmap or low vm space SELinux: detect dead booleans SELinux: do not clear f_op when removing entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [LRO]: fix lro_gen_skb() alignment [TCP]: NAGLE_PUSH seems to be a wrong way around [TCP]: Move prior_in_flight collect to more robust place [TCP] FRTO: Use of existing funcs make code more obvious & robust [IRDA]: Move ircomm_tty_line_info() under #ifdef CONFIG_PROC_FS [ROSE]: Trivial compilation CONFIG_INET=n case [IPVS]: Fix sched registration race when checking for name collision. [IPVS]: Don't leak sysctl tables if the scheduler registration fails.
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Update defconfig. [SPARC]: Add missing of_node_put [SPARC64]: check for possible NULL pointer dereference [SPARC]: Add missing "space" [SPARC64]: Add missing "space" [SPARC64]: Add missing pci_dev_put [SYSCTL_CHECK]: Fix typo in KERN_SPARC_SCONS_PWROFF entry string. [SPARC64]: Missing mdesc_release() in ldc_init().
-
由 Al Viro 提交于
endianness annotations in networking code had been in place for quite a while; in particular, sin_port and s_addr are annotated as big-endian. Code in ocfs2 had __force casts added apparently to shut the sparse warnings up; of course, these days they only serve to *produce* warnings for no reason whatsoever... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
BFS_FILEBLOCKS() expects struct bfs_inode * (on-disk data, with little- endian fields), not struct bfs_inode_info * (in-core stuff, with host- endian ones). It's a macro and fields with the right names are present in bfs_inode_info, so it compiles, but on big-endian host it gives bogus results. Introduced in commit f433dc56 ("Fixes to the BFS filesystem driver"). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Now that X86_32 is provided on Kconfig level for uml-i386, there's no need to play with it explicitly on Makefile level anymore. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
access_flags_to_mode() gets on-the-wire data (little-endian) and treats it as host-endian. Introduced in commit e01b6400 ("[CIFS] enable get mode from ACL when cifsacl mount option specified") Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Eric Paris 提交于
Given a specifically crafted binary do_brk() can be used to get low pages available in userspace virtual memory and can thus be used to circumvent the mmap_min_addr low memory protection. Add security checks in do_brk(). Signed-off-by: NEric Paris <eparis@redhat.com> Acked-by: NAlan Cox <alan@redhat.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <jmorris@namei.org> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vegard Nossum 提交于
I can't pass memory allocated by kmalloc() to ksize() if it is allocated by SLUB allocator and size is larger than (I guess) PAGE_SIZE / 2. The error of ksize() seems to be that it does not check if the allocation was made by SLUB or the page allocator. Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi> Tested-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Christoph Lameter <clameter@sgi.com>, Matt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Creating PDEs with refcount 0 and "deleted" flag has problems (see below). Switch to usual scheme: * PDE is created with refcount 1 * every de_get does +1 * every de_put() and remove_proc_entry() do -1 * once refcount reaches 0, PDE is freed. This elegantly fixes at least two following races (both observed) without introducing new locks, without abusing old locks, without spreading lock_kernel(): 1) PDE leak remove_proc_entry de_put ----------------- ------ [refcnt = 1] if (atomic_read(&de->count) == 0) if (atomic_dec_and_test(&de->count)) if (de->deleted) /* also not taken! */ free_proc_entry(de); else de->deleted = 1; [refcount=0, deleted=1] 2) use after free remove_proc_entry de_put ----------------- ------ [refcnt = 1] if (atomic_dec_and_test(&de->count)) if (atomic_read(&de->count) == 0) free_proc_entry(de); /* boom! */ if (de->deleted) free_proc_entry(de); BUG: unable to handle kernel paging request at virtual address 6b6b6b6b printing eip: c10acdda *pdpt = 00000000338f8001 *pde = 0000000000000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: af_packet ipv6 cpufreq_ondemand loop serio_raw psmouse k8temp hwmon sr_mod cdrom Pid: 23161, comm: cat Not tainted (2.6.24-rc2-8c086340 #4) EIP: 0060:[<c10acdda>] EFLAGS: 00210097 CPU: 1 EIP is at strnlen+0x6/0x18 EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: 6b6b6b6b EDX: fffffffe ESI: c128fa3b EDI: f380bf34 EBP: ffffffff ESP: f380be44 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process cat (pid: 23161, ti=f380b000 task=f38f2570 task.ti=f380b000) Stack: c10ac4f0 00000278 c12ce000 f43cd2a8 00000163 00000000 7da86067 00000400 c128fa20 00896b18 f38325a8 c128fe20 ffffffff 00000000 c11f291e 00000400 f75be300 c128fa20 f769c9a0 c10ac779 f380bf34 f7bfee70 c1018e6b f380bf34 Call Trace: [<c10ac4f0>] vsnprintf+0x2ad/0x49b [<c10ac779>] vscnprintf+0x14/0x1f [<c1018e6b>] vprintk+0xc5/0x2f9 [<c10379f1>] handle_fasteoi_irq+0x0/0xab [<c1004f44>] do_IRQ+0x9f/0xb7 [<c117db3b>] preempt_schedule_irq+0x3f/0x5b [<c100264e>] need_resched+0x1f/0x21 [<c10190ba>] printk+0x1b/0x1f [<c107c8ad>] de_put+0x3d/0x50 [<c107c8f8>] proc_delete_inode+0x38/0x41 [<c107c8c0>] proc_delete_inode+0x0/0x41 [<c1066298>] generic_delete_inode+0x5e/0xc6 [<c1065aa9>] iput+0x60/0x62 [<c1063c8e>] d_kill+0x2d/0x46 [<c1063fa9>] dput+0xdc/0xe4 [<c10571a1>] __fput+0xb0/0xcd [<c1054e49>] filp_close+0x48/0x4f [<c1055ee9>] sys_close+0x67/0xa5 [<c10026b6>] sysenter_past_esp+0x5f/0x85 ======================= Code: c9 74 0c f2 ae 74 05 bf 01 00 00 00 4f 89 fa 5f 89 d0 c3 85 c9 57 89 c7 89 d0 74 05 f2 ae 75 01 4f 89 f8 5f c3 89 c1 89 c8 eb 06 <80> 38 00 74 07 40 4a 83 fa ff 75 f4 29 c8 c3 90 90 90 57 83 c9 EIP: [<c10acdda>] strnlen+0x6/0x18 SS:ESP 0068:f380be44 Also, remove broken usage of ->deleted from reiserfs: if sget() succeeds, module is already pinned and remove_proc_entry() can't happen => nobody can mark PDE deleted. Dummy proc root in netns code is not marked with refcount 1. AFAICS, we never get it, it's just for proper /proc/net removal. I double checked CLONE_NETNS continues to work. Patch survives many hours of modprobe/rmmod/cat loops without new bugs which can be attributed to refcounting. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Kara 提交于
Before we start committing a transaction, we call __journal_clean_checkpoint_list() to cleanup transaction's written-back buffers. If this call happens to remove all of them (and there were already some buffers), __journal_remove_checkpoint() will decide to free the transaction because it isn't (yet) a committing transaction and soon we fail some assertion - the transaction really isn't ready to be freed :). We change the check in __journal_remove_checkpoint() to free only a transaction in T_FINISHED state. The locking there is subtle though (as everywhere in JBD ;(). We use j_list_lock to protect the check and a subsequent call to __journal_drop_transaction() and do the same in the end of journal_commit_transaction() which is the only place where a transaction can get to T_FINISHED state. Probably I'm too paranoid here and such locking is not really necessary - checkpoint lists are processed only from log_do_checkpoint() where a transaction must be already committed to be processed or from __journal_clean_checkpoint_list() where kjournald itself calls it and thus transaction cannot change state either. Better be safe if something changes in future... Signed-off-by: NJan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Writing to XIP files at a non-page-aligned offset results in data corruption because the writes were always sent to the start of the page. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Gardner 提交于
The AMD CS5535/CS5536 GPIO has two alternate output modes: AUX-1 and AUX-2. When either AUX is enabled, the cs5535_gpio driver cannot control the output. Some BIOS code for the Geode processor enables AUX-1 for GPIO-1, which configures it as the PC BEEP output. This patch will disable AUX-1 and AUX-2 when the user enables output. Signed-of-by: NBen Gardner <gardner.ben@gmail.com> Cc: Richard Knutsson <ricknu-0@student.ltu.se> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Emelyanov 提交于
register_sysctl_table() can return NULL sometimes, e.g. when kmalloc() returns NULL or when sysctl check fails. I've also noticed, that many (most?) code in the kernel doesn't check for the return value from register_sysctl_table() and later simply calls the unregister_sysctl_table() with potentially NULL argument. This is unlikely on a common kernel configuration, but in case we're dealing with modules and/or fault-injection support, there's a slight possibility of an OOPS. Changing all the users to check for return code from the registering does not look like a good solution - there are too many code doing this and failure in sysctl tables registration is not a good reason to abort module loading (in most of the cases). So I think, that we can just have this check in unregister_sysctl_table just to avoid accidental OOPS-es (actually, the unregister_sysctl_table() did exactly this, before the start_unregistering() appeared). Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bryan Wu 提交于
- reconfigure SPI baud from speed_hz of each spi transfer - according to spi_transfer.bits_per_word to reprogram register and setup correct SPI operation handlers Signed-off-by: NBryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-