The code here is mostly the same.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Be a little more concise.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The typical setclientid or exchange_id will probably be performed with a
credential that maps to either root or nobody, so comparing just uid's
is unlikely to be useful.  So, use everything else we can get our hands
on.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

RFC 5661 actually says we should allow an exchange_id to remove a
matching client, even if the exchange_id comes from a different
principal, *if* the victim client lacks any state.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Minor cleanup: it's simpler to have separate code paths for the update
and non-update cases.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Make these comments a bit more concise and uniform.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Following rfc 5661 section 2.4.1, we can permit a 4.1 client to remove
an established 4.0 client's state.

(But we don't allow updates.)
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We mustn't allow a client to destroy another client with established
state unless it has the right credential.

And some minor cleanup.

(Note: our comparison of credentials is actually pretty bogus currently;
that will need to be fixed in another patch.)
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There's no point to the dprintk here as the main proc_compound loop
already does this.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

We just verified above that these two verifiers are already the same.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

debugfs read operations were returning the contents of an uninitialized u64.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Handle the st_deny_bmap in a similar fashion to the st_access_bmap. Add
accessor functions and use those instead of bare bitops.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Currently, we do this for the most part with "bare" bitops, but
eventually we'll need to expand the share mode code to handle access
and deny modes on other nodes.

In order to facilitate that code in the future, move to some generic
accessor functions. For now, these are mostly static inlines, but
eventually we'll want to move these to "real" functions that are
able to handle multi-node configurations or have a way to "swap in"
new operations to be done in lieu of or in conjunction with these
atomic bitops.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

All of the callers treat the return that way already.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

These functions are identical. Also, rename them to bmap_to_share_mode
to better reflect what they do, and have them just return the result
instead of passing in a pointer to the storage location.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

According to RFC 3530bis, the only items SETCLIENTID_CONFIRM processing
should be concerned with is the clientid, clientid verifier, and
principal.  The client's IP address is not supposed to be interesting.

And, NFS4ERR_CLID_INUSE is meant only for principal mismatches.

I triggered this logic with a prototype UCS client -- one that
uses the same nfs_client_id4 string for all servers.  The client
mounted our server via its IPv4, then via its IPv6 address.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This is just a code move, which from my POV makes the code look better.
I.e. now on start we have 3 different stages:
1) Service creation.
2) Service per-net data allocation.
3) Service start.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This function creates service if it doesn't exist, or increases usage
counter if it does, and returns a pointer to it.  The usage counter will
be droppepd by svc_destroy() later in lockd_up().
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This patch also replaces svc_rpcb_setup() with svc_bind().
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

There's little point in waiting until after we allocate all of the pages
to see if we're going to overrun the array. In the event that this
calculation is really off we could end up scribbling over a bunch of
memory and make it tougher to debug.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The idea is to separate service destruction and per-net operations,
because these are two different things and the mix looks ugly.

Notes:

1) For NFS server this patch looks ugly (sorry for that). But these
place will be rewritten soon during NFSd containerization.

2) LockD per-net counter increase int lockd_up() was moved prior to
make_socks() to make lockd_down_net() call safe in case of error.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This new routine is responsible for service registration in a specified
network context.

The idea is to separate service creation from per-net operations.

Note also: since registering service with svc_bind() can fail, the
service will be destroyed and during destruction it will try to
unregister itself from rpcbind. In this case unregistration has to be
skipped.
Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The data in Kerberos gss tokens can be rotated.  But we were lazy and
rejected any nonzero rotation value.  It wasn't necessary for the
implementations we were testing against at the time.

But it appears that Windows does use a nonzero value here.

So, implement rotation to bring ourselves into compliance with the spec
and to interoperate with Windows.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The fs_location->hosts list is split on colons, but this doesn't work when
IPv6 addresses are used (they contain colons).
This patch adds the function nfsd4_encode_components_esc() to
allow the caller to specify escape characters when splitting on 'sep'.
In order to fix referrals, this patch must be used with the mountd patch
that similarly fixes IPv6 [] escaping.
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Though actually this doesn't matter much, as NFSv4.0 clients are
required to treat the change attribute as opaque.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Cc: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

In each of these cases there's a simple unambiguous correct choice, and
no actual bug.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

OK, admittedly I'm mainly just trying to shut sparse up.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

They're equivalent, but SEEK_SET is more informative...

Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This is needed to share code between the current server upcall mechanism
and the new gssproxy upcall mechanism introduced in a following patch.
Signed-off-by: NSimo Sorce <simo@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>