This patch moves the field of TSC scaling ratio from the architecture
struct vcpu_svm to the common struct kvm_vcpu_arch.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The number of bits of the fractional part of the 64-bit TSC scaling
ratio in VMX and SVM is different. This patch makes the architecture
code to collect the number of fractional bits and other related
information into variables that can be accessed in the common code.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These include module parameters and variables that are set by
kvm_x86_ops->hardware_setup.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

They are exactly the same, except that handle_mmio_page_fault
has an unused argument and a call to WARN_ON.  Remove the unused
argument from the callers, and move the warning to (the former)
handle_mmio_page_fault_common.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

I found PML was broken since below commit:

	commit feda805f
	Author: Xiao Guangrong <guangrong.xiao@linux.intel.com>
	Date:   Wed Sep 9 14:05:55 2015 +0800

	KVM: VMX: unify SECONDARY_VM_EXEC_CONTROL update

	Unify the update in vmx_cpuid_update()
Signed-off-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
	[Rewrite to use vmcs_set_secondary_exec_control. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The reason is in above commit vmx_cpuid_update calls vmx_secondary_exec_control,
in which currently SECONDARY_EXEC_ENABLE_PML bit is cleared unconditionally (as
PML is enabled in creating vcpu). Therefore if vcpu_cpuid_update is called after
vcpu is created, PML will be disabled unexpectedly while log-dirty code still
thinks PML is used.

Fix this by clearing SECONDARY_EXEC_ENABLE_PML in vmx_secondary_exec_control
only when PML is not supported or not enabled (!enable_pml). This is more
reasonable as PML is currently either always enabled or disabled. With this
explicit updating SECONDARY_EXEC_ENABLE_PML in vmx_enable{disable}_pml is not
needed so also rename vmx_enable{disable}_pml to vmx_create{destroy}_pml_buffer.

Fixes: feda805fSigned-off-by: NKai Huang <kai.huang@linux.intel.com>
[While at it, change a wrong ASSERT to an "if".  The condition can happen
 if creating the VCPU fails with ENOMEM. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit b18d5431 ("KVM: x86: fix CR0.CD virtualization") was
technically correct, but it broke OVMF guests by slowing down various
parts of the firmware.

Commit fb279950 ("KVM: vmx: obey KVM_QUIRK_CD_NW_CLEARED") quirked the
first function modified by b18d5431, vmx_get_mt_mask(), for OVMF's
sake. This restored the speed of the OVMF code that runs before
PlatformPei (including the memory intensive LZMA decompression in SEC).

This patch extends the quirk to the second function modified by
b18d5431, kvm_set_cr0(). It eliminates the intrusive slowdown that
hits the EFI_MP_SERVICES_PROTOCOL implementation of edk2's
UefiCpuPkg/CpuDxe -- which is built into OVMF --, when CpuDxe starts up
all APs at once for initialization, in order to count them.

We also carry over the kvm_arch_has_noncoherent_dma() sub-condition from
the other half of the original commit b18d5431.

Fixes: b18d5431
Cc: stable@vger.kernel.org
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Tested-by: NJanusz Mocek <januszmk6@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>#
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The SDM says that exiting system management mode from 64-bit mode
is invalid, but that would be too good to be true.  But actually,
most of the code is already there to support exiting from compat
mode (EFER.LME=1, EFER.LMA=0).  Getting all the way from 64-bit
mode to real mode only requires clearing CS.L and CR4.PCIDE.

Cc: stable@vger.kernel.org
Fixes: 660a5d51Tested-by: NLaszlo Ersek <lersek@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The comment in code had it mostly right, but we enable paging for
emulated real mode regardless of EPT.

Without EPT (which implies emulated real mode), secondary VCPUs won't
start unless we disable SM[AE]P when the guest doesn't use paging.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The function is not used outside device assignment, and
kvm_arch_set_irq_inatomic has a different prototype.  Move it here and
make it static to avoid confusion.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The symbols are always defined.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We do not want to do too much work in atomic context, in particular
not walking all the VCPUs of the virtual machine.  So we want
to distinguish the architecture-specific injection function for irqfd
from kvm_set_msi.  Since it's still empty, reuse the newly added
kvm_arch_set_irq and rename it to kvm_arch_set_irq_inatomic.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

BSP doesn't get INIT so its apic_arb_prio isn't zeroed after reboot.
BSP won't get lowest priority interrupts until other VCPUs get enough
interrupts to match their pre-reboot apic_arb_prio.

That behavior doesn't fit into KVM's round-robin-like interpretation of
lowest priority delivery ... userspace should KVM_SET_LAPIC on reset, so
just zero apic_arb_prio there.
Reported-by: NYuki Shibuya <shibuya.yk@ncos.nec.co.jp>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Moved Hyper-V synic contants from guest Hyper-V drivers private
header into x86 arch uapi Hyper-V header.

Added Hyper-V synic msr's flags into x86 arch uapi Hyper-V header.
Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

GET_SMSTATE depends on real mode to ensure that smbase+offset is treated
as a physical address, which has already caused a bug after shuffling
the code.  Enforce physical addressing.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reported-by: NLaszlo Ersek <lersek@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We want to read the physical memory when emulating RSM.

X86EMUL_IO_NEEDED is returned on all errors for consistency with other
helpers.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Tested-by: NLaszlo Ersek <lersek@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

removing unused variables, found by coccinelle
Signed-off-by: NSaurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some times it is useful for architecture implementations of KVM to know
when the VCPU thread is about to block or when it comes back from
blocking (arm/arm64 needs to know this to properly implement timers, for
example).

Therefore provide a generic architecture callback function in line with
what we do elsewhere for KVM generic-arch interactions.
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>

Commit fd136902 ("KVM: x86: MMU: Move mapping_level_dirty_bitmap()
call in mapping_level()") forgot to initialize force_pt_level to false
in FNAME(page_fault)() before calling mapping_level() like
nonpaging_map() does.  This can sometimes result in forcing page table
level mapping unnecessarily.

Fix this and move the first *force_pt_level check in mapping_level()
before kvm_vcpu_gfn_to_memslot() call to make it a bit clearer that
the variable must be initialized before mapping_level() gets called.

This change can also avoid calling kvm_vcpu_gfn_to_memslot() when
!check_hugepage_cache_consistency() check in tdp_page_fault() forces
page table level mapping.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Not zeroing EFER means that a 32-bit firmware cannot enter paging mode
without clearing EFER.LME first (which it should not know about).
Yang Zhang from Intel confirmed that the manual is wrong and EFER is
cleared to zero on INIT.

Fixes: d28bc9dd
Cc: stable@vger.kernel.org
Cc: Yang Z Zhang <yang.z.zhang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As reported at https://bugs.launchpad.net/qemu/+bug/1494350,
it is possible to have vcpu->arch.st.last_steal initialized
from a thread other than vcpu thread, say the iothread, via
KVM_SET_MSRS.

Which can cause an overflow later (when subtracting from vcpu threads
sched_info.run_delay).

To avoid that, move steal time accumulation to vcpu entry time,
before copying steal time data to guest.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Calling kvm_vcpu_gfn_to_memslot() twice in mapping_level() should be
avoided since getting a slot by binary search may not be negligible,
especially for virtual machines with many memory slots.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that it has only one caller, and its name is not so helpful for
readers, remove it.  The new memslot_valid_for_gpte() function
makes it possible to share the common code between
gfn_to_memslot_dirty_bitmap() and mapping_level().
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is necessary to eliminate an extra memory slot search later.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

As a bonus, an extra memory slot search can be eliminated when
is_self_change_mapping is true.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This will be passed to a function later.
Signed-off-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently we always write the next_rip of the shadow vmcb to
the guests vmcb when we emulate a vmexit. This could confuse
the guest when its cpuid indicated no support for the
next_rip feature.

Fix this by only propagating next_rip if the guest actually
supports it.

Cc: Bandan Das <bsd@redhat.com>
Cc: Dirk Mueller <dmueller@suse.com>
Tested-By: NDirk Mueller <dmueller@suse.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The loop is computing one of two constants, it can be simpler to write
everything inline.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose VPID capability to L1. For nested guests, we don't do anything
specific for single context invalidation. Hence, only advertise support
for global context invalidation. The major benefit of nested VPID comes
from having separate vpids when switching between L1 and L2, and also
when L2's vCPUs not sched in/out on L1.
Reviewed-by: NWincy Van <fanwenyi0529@gmail.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

VPID is used to tag address space and avoid a TLB flush. Currently L0 use
the same VPID to run L1 and all its guests. KVM flushes VPID when switching
between L1 and L2.

This patch advertises VPID to the L1 hypervisor, then address space of L1
and L2 can be separately treated and avoid TLB flush when swithing between
L1 and L2. For each nested vmentry, if vpid12 is changed, reuse shadow vpid
w/ an invvpid.

Performance:

run lmbench on L2 w/ 3.5 kernel.

Context switching - times in microseconds - smaller is better
-------------------------------------------------------------------------
Host                 OS  2p/0K 2p/16K 2p/64K 8p/16K 8p/64K 16p/16K 16p/64K
                         ctxsw  ctxsw  ctxsw ctxsw  ctxsw   ctxsw   ctxsw
--------- ------------- ------ ------ ------ ------ ------ ------- -------
kernel    Linux 3.5.0-1 1.2200 1.3700 1.4500 4.7800 2.3300 5.60000 2.88000  nested VPID
kernel    Linux 3.5.0-1 1.2600 1.4300 1.5600   12.7   12.9 3.49000 7.46000  vanilla
Reviewed-by: NJan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: NWincy Van <fanwenyi0529@gmail.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the INVVPID instruction emulation.
Reviewed-by: NWincy Van <fanwenyi0529@gmail.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce __vmx_flush_tlb() to handle specific vpid.
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adjust allocate/free_vid so that they can be reused for the nested vpid.
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On real hardware, edge-triggered interrupts don't set a bit in TMR,
which means that IOAPIC isn't notified on EOI.  Do the same here.

Staying in guest/kernel mode after edge EOI is what we want for most
devices.  If some bugs could be nicely worked around with edge EOI
notifications, we should invest in a better interface.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM uses eoi_exit_bitmap to track vectors that need an action on EOI.
The problem is that IOAPIC can be reconfigured while an interrupt with
old configuration is pending and eoi_exit_bitmap only remembers the
newest configuration;  thus EOI from the pending interrupt is not
recognized.

(Reconfiguration is not a problem for level interrupts, because IOAPIC
 sends interrupt with the new configuration.)

For an edge interrupt with ACK notifiers, like i8254 timer; things can
happen in this order
 1) IOAPIC inject a vector from i8254
 2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap
    on original VCPU gets cleared
 3) guest's handler for the vector does EOI
 4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is
    not in that VCPU's eoi_exit_bitmap
 5) i8254 stops working

A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the
vector is in PIR/IRR/ISR.

This creates an unwanted situation if the vector is reused by a
non-IOAPIC source, but I think it is so rare that we don't want to make
the solution more sophisticated.  The simple solution also doesn't work
if we are reconfiguring the vector.  (Shouldn't happen in the wild and
I'd rather fix users of ACK notifiers instead of working around that.)

The are no races because ioapic injection and reconfig are locked.

Fixes: b053b2ae ("KVM: x86: Add EOI exit bitmap inference")
[Before b053b2ae, this bug happened only with APICv.]
Fixes: c7c9c56c ("x86, apicv: add virtual interrupt delivery support")
Cc: <stable@vger.kernel.org>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After moving PIR to IRR, the interrupt needs to be delivered manually.
Reported-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In order to get into 64-bit protected mode, you need to enable
paging while EFER.LMA=1.  For this to work, CS.L must be 0.
Currently, we load the segments before CR0 and CR4, which means
that if RSM returns into 64-bit protected mode CS.L is already 1
and everything breaks.

Luckily, CS.L=0 is always the case when executing RSM, because it
is forbidden to execute RSM from 64-bit protected mode.  Hence it
is enough to load CR0 and CR4 first, and only then the segments.

Fixes: 660a5d51
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unfortunately I only noticed this after pushing.

Fixes: f0d648bd
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An SMI to a halted VCPU must wake it up, hence a VCPU with a pending
SMI must be considered runnable.

Fixes: 64d60670
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Split the huge conditional in two functions.

Fixes: 64d60670
Cc: stable@vger.kernel.org
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Otherwise, two copies (one of them never populated and thus bogus)
are allocated for the regular and SMM address spaces.  This breaks
SMM with EPT but without unrestricted guest support, because the
SMM copy of the identity page map is all zeros.

By moving the allocation to the caller we also remove the last
vestiges of kernel-allocated memory regions (not accessible anymore
in userspace since commit b74a07be, "KVM: Remove kernel-allocated
memory regions", 2010-06-21); that is a nice bonus.
Reported-by: NAlexandre DERUMIER <aderumier@odiso.com>
Cc: stable@vger.kernel.org
Fixes: 9da0e4d5Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>