Propagate sNaN payload in quieting in the legacy-NaN mode as well.  If
clearing the quiet bit would produce infinity, then set the next lower
trailing significand field bit, matching the SB-1 and BMIPS5000 hardware
implementations.  Some other MIPS FPU hardware implementations do
produce the default qNaN bit pattern instead.

This reverts some changes made for semantics preservation with commit
dc3ddf42 [MIPS: math-emu: Update sNaN quieting handlers], consequently
bringing back most of the semantics from before commit fdffbafb [Lots of
FPU bug fixes from Kjeld Borch Egevang.], except from the qNaN produced
in the infinity case.  Previously the default qNaN bit pattern was
produced in that case.
Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11483/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Update the ELF personality macros used for individual ABIs to make
actions in the same order across all of them and match formatting too.
Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Fortune <Matthew.Fortune@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Since commit 8cb48fe1 ("MIPS: Provide correct siginfo_t.si_stime"),
MIPS' uapi/asm/siginfo.h has included uapi/asm-generic/siginfo.h
directly before defining MIPS' struct siginfo, in order to get the
necessary definitions needed for the siginfo struct without the generic
copy_siginfo() hitting compiler errors due to struct siginfo not yet
being defined.

Now that the generic copy_siginfo() is moved out to linux/signal.h we
can safely include asm-generic/siginfo.h before defining the MIPS
specific struct siginfo, which avoids the uapi/ include as well as
breakage due to generic copy_siginfo() being defined before struct
siginfo.
Reported-by: NChristopher Ferris <cferris@google.com>
Fixes: 8cb48fe1 ("MIPS: Provide correct siginfo_t.si_stime")
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Petr Malat <oss@malat.biz>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.0-
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The generic copy_siginfo() is currently defined in
asm-generic/siginfo.h, after including uapi/asm-generic/siginfo.h which
defines the generic struct siginfo. However this makes it awkward for an
architecture to use it if it has to define its own struct siginfo (e.g.
MIPS and potentially IA64), since it means that asm-generic/siginfo.h
can only be included after defining the arch-specific siginfo, which may
be problematic if the arch-specific definition needs definitions from
uapi/asm-generic/siginfo.h.

It is possible to work around this by first including
uapi/asm-generic/siginfo.h to get the constants before defining the
arch-specific siginfo, and include asm-generic/siginfo.h after. However
uapi headers can't be included by other uapi headers, so that first
include has to be in an ifdef __kernel__, with the non __kernel__ case
including the non-UAPI header instead.

Instead of that mess, move the generic copy_siginfo() definition into
linux/signal.h, which allows an arch-specific uapi/asm/siginfo.h to
include asm-generic/siginfo.h and define the arch-specific siginfo, and
for the generic copy_siginfo() to see that arch-specific definition.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Petr Malat <oss@malat.biz>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-ia64@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 4.0-
Patchwork: https://patchwork.linux-mips.org/patch/12478/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

octeon_smp_setup and octeon_prepare_cpus are just used during initialization
period, so mark them as __init. And, octeon_prepare_cpus is just used in smp.c,
so make it static as well.
Signed-off-by: NYang Shi <yang.shi@windriver.com>
Cc: david.daney@cavium.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12574/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Remove unneeded leds0 alias.
- Switch to bcm6345-l1-intc interrupt controller.
- Use interrupt-controller instead of periph_intc and cpu_intc.
- Add uart1 node.
- Single ohci and ehci nodes.
- Avoid using underscores in node names.
- Rename uart aliases to serial.
- Remove blank line in cpus node.

[ralf@linux-mips.org: fix references in bcm96368mvwg.dts so the file keeps
building.]
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Remove unneeded leds0 alias.
- Switch to bcm6345-l1-intc interrupt controller.
- Use interrupt-controller instead of periph_intc and cpu_intc.
- Add uart1, ehci and ohci nodes.
- Refactor syscon and syscon-reboot.
- Avoid using underscores in node names.
- Rename uart aliases to serial.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13043/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This SoC is very similar to BCM63168 and Broadcom usually refers to them as
BCM63268.
Add BCM63268 and missing BCM63168 to device tree documentation.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13042/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This adds a device tree example for SFR Neufbox4 (Sercomm version), which
also serves as a real example for brcm,bcm6358-leds.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Acked-by: NRob Herring <robh@kernel.org>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13041/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BCM6358 has a shared TLB which conflicts with current SMP support, so it must
be disabled for now.
BCM6358 uses >= 0xfffe0000 addresses for internal registers, which need to be
remapped (by using a simplified version of BRCM63xx ioremap.h).
However, 0xfff80000 is a better address, since it also covers BCM3368, leaving
the possibility to add it in the future.
Signed-off-by: NÁlvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13040/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch replaces goto out with return in ls1x_cpufreq_probe().
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13056/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch uses devm_kzalloc() instead of global structure.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13055/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch uses dev_get_platdata() to get the platform_data
instead of referencing it directly.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13054/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch replaces kzalloc() with kcalloc() when allocating
frequency table, and remove unnecessary 'out of memory' message.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13053/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch renames the file to loongson1-cpufreq.c,
and also includes some minor updates.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: linux-pm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13052/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Just to ease debugging of multiplatform kernel, make sure we print
"Broadcom BMIPS5200" for the BMIPS5200 implementation instead of
Broadcom BMIPS5000.

Fixes: 68e6a783 ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13014/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BMIPS_GENERIC being multiplatform and intended to support BMIPS3200,
BMIPS3300, BMIPS4350, BMIPS4380 and BMIPS5000-class processors, there is
not much more we can put in there since they do not share the same I and
D cache line sizes at all (doubled for every new generation
essentially), some processors have a S-cache, some don't, some have a
FPU, some don't.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13013/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

local_r4k___flush_cache_all() is missing a special check for BMIPS5000
processors, we need to blast the S-cache, just like other MTI processors
since we have an inclusive cache. We also need an additional __sync() to
make sure this is completed.

Fixes: d74b0172 ("MIPS: BMIPS: Add special cache handling in c-r4k.c")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13012/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BMIPS5000 and BMIPS5200 processor have no D cache aliases, and this is
properly handled by the per-CPU override added at the end of
r4k_cache_init(), the problem is that the output of probe_pcache()
disagrees with that, since this is too late:

Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes

With the change moved earlier, we now have a consistent output with the
settings we are intending to have:

Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes

Fixes: d74b0172 ("MIPS: BMIPS: Add special cache handling in c-r4k.c")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13011/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

BMIPS5000 and BMIPS52000 processors have their I-cache filling from the
D-cache. Since BMIPS_GENERIC does not provide (yet) a
cpu-feature-overrides.h file, this was not set anywhere, so make sure
the R4K cache detection takes care of that.

Fixes: d74b0172 ("MIPS: BMIPS: Add special cache handling in c-r4k.c")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13010/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Enable CONFIG_MTD_BCM63XX_PARTS in arch/mips/configs/bmips_be_defconfig
since this is a necessary option to parse the built-in flash partition
table on BMIPS big-endian SoCs (Cable Modem and DSL).
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12256/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Enable CONFIG_MTD_BCM63XX_PARTS in arch/mips/configs/bcm63xx_defconfig
since this is a necessary option to parse the built-in flash partition
table on BCM63xx SoCs.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NBrian Norris <computersforpeace@gmail.com>
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12255/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds Loongson1 architecture entry.
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/13034/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

- Add DMA device
- Add NAND device
- Add GPIO device
- Add LED device
- Update the defconfig and rename it to loongson1b_defconfig
- Fix ioremap size
- Other minor fixes
Signed-off-by: NKelvin Cheung <keguang.zhang@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dmaengine@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/13033/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

... making upstream development binutils snapshots work as expected,
e.g.:

$ mips64el-linux-ld --version
GNU ld (GNU Binutils) 2.20.1.20100303
[...]
$
Signed-off-by: NMaciej W. Rozycki <macro@imgtec.com>
Acked-by: NMichal Marek <mmarek@suse.cz>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12537/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fixes wrong bcm7425 SATA AHCI hardware interrupt property value with
periph_intc and SATA PHY unit address, and removes needless
brcm,broken-{ncq,phy} properties what are not used anywhere.
Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/13017/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add UART, I2C, SATA device tree nodes on Broadcom BCM7xxx MIPS-based
platforms.
Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/13016/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

In Kconfig "=n" is not correct syntax, "!" is the preferred way for
false-positive expression.
Signed-off-by: NYang Shi <yang.shi@windriver.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12572/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When debugging a relocated kernel, the addresses of the relocated
symbols and the offset applied is essential information. If the kernel
is compiled with debugging information, then print this information
during bootup using the same function as the panic notifier.

[ralf@linux-mips.org: Fixed spelling mistake pointed out by
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.]
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12989/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds KASLR to the MIPS kernel.

Entropy is derived from the banner, which will change every build and
random_get_entropy() which should provide additional runtime entropy.
Additionally the bootloader may pass entropy via the /chosen/kaslr-seed
node in device tree.

The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from
its link address (PHYSICAL_START). Because relocation happens so early
in the kernel boot, the amount of physical memory has not yet been
determined. This means the only way to limit relocation within the
available memory is via Kconfig.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12990/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Early access to the kernel command line requires early access to the FDT
for platforms which pass the command line within the device tree. There
was no common way to retrieve the location of the FDT without incurring
side effects, such as plat_mem_setup which, on Malta at least,
initializes a bunch of other stuff.

This patch adds plat_get_ftd() for IMG platforms.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12988/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add option to KConfig to enable the kernel to relocate itself at
runtime.

Relocation is supported R2 and later of the MIPS architecture, 32bit
and 64bit. The platform is also required to provide support through
plat_get_fdt() added in a later patch.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12987/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The kernel reserves all memory before the _end symbol as bootmem,
however, once the kernel can be relocated elsewhere in memory this may
result in a large amount of wasted memory. The assumption is that the
memory between the link and relocated address of the kernel may be
released back to the available memory pool.

Memory statistics for a Malta with the kernel relocating by
16Mb, without the patch:
Memory: 105952K/131072K available (4604K kernel code, 242K rwdata,
892K rodata, 1280K init, 183K bss, 25120K reserved, 0K cma-reserved)
And with the patch:
Memory: 122336K/131072K available (4604K kernel code, 242K rwdata,
892K rodata, 1280K init, 183K bss, 8736K reserved, 0K cma-reserved)

The 16Mb offset is removed from the reserved region and added back to
the available region.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12986/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

If CONFIG_RELOCATABLE is enabled, call relocate_kernel.

This function will return the entry point of the relocated kernel if
copy/relocate is sucessful or the original entry point if not. The stack
pointer must then be pointed into the new image.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12984/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/kernel/relocate.c contains the functions necessary to relocate
the kernel elsewhere in memory

The kernel makes a copy of itself at the new address. It uses the
relocation table inserted by the relocs tool to fix symbol references
within the new image.

If copy/relocation is sucessful then the entry point of the new kernel
is returned, otherwise fall back to starting the kernel in place.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12985/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When CONFIG_RELOCATABLE is enabled (added in later patch) add
--emit-relocs to vmlinux LDFLAGS so that fully linked vmlinux contains
relocation information.

Run the previously added relocs tool to fill in the .data.relocs section
of vmlinux with a table of relocations. The relocs tool will also remove
(mark as 0 length) the relocation sections added to vmlinux.

When vmlinux is passed to the boot makefile for conversion into a boot
image the now empty relocation sections will be removed and the
populated relocation table will be included in the binary image.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12983/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

When CONFIG_RELOCATABLE is enabled, add a new section in the memory map
to be filled with relocation data.

CONFIG_RELOCATION_TABLE_SIZE allows the amount of space reserved to be
adjusted if necessary.

The relocs tool will populate this reserved space with relocation
information. The space is reserved within the elf by filling it with
0's, and an invalid entry is left at the start of the space such that
kernel relocation will be aborted if the table is empty.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12982/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Build the relocs tool as part of the kbuild
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12980/
Patchwork: https://patchwork.linux-mips.org/patch/13242/
Patchwork: https://patchwork.linux-mips.org/patch/13233/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This tool is based on the x86/boot/tools/relocs tool.

It parses the relocations present in the vmlinux elf file, building a
table of relocations that will be necessary to run the kernel from an
address other than its link address. This table is inserted into the
vmlinux elf, in the .data.relocs section. The table is subsequently used
by the code in arch/mips/kernel/relocate.c (added later) to relocate the
kernel.

The tool, by default, also marks all relocation sections as 0 length.
This is due to objcopy currently being unable to handle copying the
relocations between 64 and 32 bit elf files as is done when building a
64 bit kernel.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: kernel-hardening@lists.openwall.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12981/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These values are constant and should be marked as such.
Signed-off-by: NMatt Redfearn <matt.redfearn@imgtec.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: IMG-MIPSLinuxKerneldevelopers@imgtec.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12979/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>