You need to sign in or sign up before continuing.
- 09 8月, 2008 1 次提交
-
-
由 Henrik Rydberg 提交于
This driver adds support for the multitouch trackpad on the new Apple Macbook Air and Macbook Pro Penryn laptops. It replaces the appletouch driver on those computers, and integrates well with the synaptics driver of the Xorg system. [dtor@mail.ru: various cleanups] Signed-off-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 23 7月, 2008 9 次提交
-
-
由 Jiri Kosina 提交于
This patch completely removes the dependency of usbkbd and usbmouse drivers on usbhid code. usbkbd/usbmouse drivers are not needed in the vast majority of cases anyway, and they shouldn't be loaded in standard configurations at all. They are supposed to be as trivial as possible, and searching for HID_QUIRK_IGNORE can even be bad in some cases. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Logitech DiNovo desktop needs the same quirk as other DiNovo devices. Reported-by: NFarid Benamrouche <farid.benamrouche@free.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
When usbmouse/kbd is set to build, USB_HID is never defined due to the USB_HID!=y Kconfig rule. Test CONFIG_USB_HID_MODULE in both drivers instead. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Dan Nicholson 提交于
Some Logitech mice have a tilt wheel which register as HWHEEL buttons. The events are positive for a click to the right and negative for a click to the left. Applications expect the opposite, though. I suspect this affects a lot more Logitech mice, but these are the only two I have. I tested this using evtest and a GTK application. A similar Microsoft Intellimouse I have works correctly. Signed-off-by: NDan Nicholson <dbn.lists@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Ming Lei 提交于
mark it as const because it is read only Signed-off-by: NMing Lei <tom.leiming@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Alexandre Karpenko 提交于
Added device ids to hid-quriks for detection of keyboards on 4th generation Macbook Pro and Macbook Air The naming scheme is consistent with past Apple keyboards in hid-quirks; as defined by Apple (including device ids) in: /System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/Co ntents/Info.plist Patch was originally posted and tested at: https://bugs.launchpad.net/mactel-support/+bug/207127Signed-off-by: NAlexandre Karpenko <alexander@comm.utoronto.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Remove unused inode variable from hiddev compat ioctl handler. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Fix build failure introduced by Alan's ioctl -> unlocked_ioctl (pushing BKL down to the driver) conversion patch for hiddev. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Alan Cox 提交于
Push down the BKL. In some cases compat_ioctl already doesn't take the BKL so we don't either. Some of the locking here seems already dubious and object lifetimes want documenting Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 7月, 2008 2 次提交
-
-
由 Ming Lei 提交于
This patch renames the existing usb_reset_device in hub.c to usb_reset_and_verify_device and renames the existing usb_reset_composite_device to usb_reset_device. Also the new usb_reset_and_verify_device does't need to be EXPORTED . The idea of the patch is that external interface driver should warn the other interfaces' driver of the same device before and after reseting the usb device. One interface driver shoud call _old_ usb_reset_composite_device instead of _old_ usb_reset_device since it can't assume the device contains only one interface. The _old_ usb_reset_composite_device is safe for single interface device also. we rename the two functions to make the change easily. This patch is under guideline from Alan Stern. Signed-off-by: NMing Lei <tom.leiming@gmail.com>
-
由 Ming Lei 提交于
From the current implementation of usb_reset_composite_device function, the iface parameter is no longer useful. This function doesn't do something special for the iface usb_interface,compared with other interfaces in the usb_device. So remove the parameter and fix the related caller. Signed-off-by: NMing Lei <tom.leiming@gmail.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 5月, 2008 4 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Dylan R Semler 提交于
The new iMON LCDs from SoundGraph need to be blacklisted from HID in order to be used by lirc. Signed-off-by: NDylan R Semler <dylan.semler@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Xiaofan Chen 提交于
Microchip PICkit 1 and PICKit 2 USB Programmers are USB HID class of device but they are not real HID device. They are now supported by libusb based programs like the following programs. pk2 and pk2cmd Linux port: http://home.pacbell.net/theposts/picmicro/ usb_pickit: http://tfc.duke.free.fr/pickit.html usb_pickit original version: http://charm.cs.uiuc.edu/users/olawlor/projects/2003/microchip/ Therefore it ispreferred to blacklist them. Signed-off-by: NXiaofan Chen <xiaofanc@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
Since 2.6.25 the HID_QUIRK_APPLE_HAS_FN quirk is enabled even for non-laptop Apple keyboards of the Aluminium series. The USB version of these don't need Numlock emulation, like the laptop (and Aluminium Wireless) do, as they have a proper keypad. This patch splits the Numlock emulation for Apple keyboards in a different quirk flag, so that it can be enabled for all the keyboards but the Aluminium USB ones. If the Numlock emulation is enabled for Aluminium USB keyboards, the JKL and UIO keys become the numeric pad, and the rest of the keyboard is disabled, included the key used to disable Numlock. Additionally, these keyboard should not have a Numlock at all, as the Numlock key is instead replaced by the 'Clear' key as usual for Apple USB keyboards. Signed-off-by: NDiego 'Flameeyes' Petteno <flameeyes@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 4月, 2008 1 次提交
-
-
由 Al Viro 提交于
usb_control_msg() converts arguments to little-endian itself, doing that in caller means breakage on big-endian boxen. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 4月, 2008 1 次提交
-
-
由 Jiri Kosina 提交于
Fix a typo in report descriptor fixup, which results in improper substitution and leaving old value in place. Reported-by: NJuha Motorsportcom <juha_motorsportcom@luukku.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 4月, 2008 16 次提交
-
-
由 Robert Schedel 提交于
Samsung USB remotes (0419:0001) report six keys via standard HID usage pages (arrow keys, OK, Power). Kernel 2.6.25 maps those to input events (in addition to the hiddev report). The remaining 43 keys are reported via proprietary HID report page and therefore by hiddev only. Applications using hiddev and input device might process the 6 standard keys twice. To avoid this, the input device will be suppressed for the Samsung remote with a quirk entry, forcing to use the hiddev device only. LIRC already contains the proper support. Signed-off-by: NRobert Schedel <r.schedel@yahoo.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Jeremy Robertson reports that GTCO engineers made a mistake and we don't need 0x60x GTCO product ids blacklisted. This mostly reverts dda3fd35, but leaves PID 0x1007 intact. Reported-by: NJeremy Roberson <jeremy.roberson@einstruction.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
WiseGroup Ltd, MP-8866 Dual Joypad needs to skip output reports, as it contains force-feedback output reports. Reported-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
There is no need to keep a few years old ThrustMaster force-feedback driver as experimental. HID_FF is currently marked experimental anyway, so this is even redundant. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Logitech diNovo Mini needs DUPLICATE_USAGES quirk. Reported-by: NTom Horsley <tom.horsley@att.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Oliver Neukum 提交于
There is a window: task A task B spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ usb_set_intfdata(intf, NULL); spin_unlock_irq(&usbhid->inlock); usb_kill_urb(usbhid->urbin); usb_kill_urb(usbhid->urbout); usb_kill_urb(usbhid->urbctrl); del_timer_sync(&usbhid->io_retry); cancel_work_sync(&usbhid->reset_work); if (!hid->open++) { res = usb_autopm_get_interface(usbhid->intf); if (res < 0) { hid->open--; return -EIO; } } if (hid_start_in(hid)) if (hid->claimed & HID_CLAIMED_INPUT) hidinput_disconnect(hid); in which an open() to an already disconnected device will submit an URB to an undead device. In case disconnect() was called by an ioctl, this'll oops. Fix by introducing a new flag and checking it in hid_start_in(). Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global functions static: - hid-core.c:hid_input_field() - usbhid/hid-quirks.c:usbhid_modify_dquirk() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This moves the misplaced rdesc quirk to the place where it belongs. Reported-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Anssi Hannula 提交于
Add force feedback support for Logitech Rumblepad 2. Tested-By: NEdgar Simo <bobbens@gmail.com> Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Since only place where this is used is usbhid, move it there. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Fix these sparse warnings: .../hid/hid-core.c:100:15: warning: incorrect type in assignment (different signedness) .../hid/hid-core.c:100:15: expected signed int [usertype] *value .../hid/hid-core.c:100:15: got unsigned int *<noident> by unsigned -> s32 .../hid/hid-input-quirks.c:336:10: warning: Using plain integer as NULL pointer by 0 -> NULL .../hid/usbhid/hid-core.c:786:46: warning: incorrect type in argument 3 (different signedness) .../hid/usbhid/hid-core.c:786:46: expected int *max .../hid/usbhid/hid-core.c:786:46: got unsigned int *<noident> .../hid/usbhid/hid-core.c:787:47: warning: incorrect type in argument 3 (different signedness) .../hid/usbhid/hid-core.c:787:47: expected int *max .../hid/usbhid/hid-core.c:787:47: got unsigned int *<noident> .../hid/usbhid/hid-core.c:788:48: warning: incorrect type in argument 3 (different signedness) .../hid/usbhid/hid-core.c:788:48: expected int *max .../hid/usbhid/hid-core.c:788:48: got unsigned int *<noident> by int -> unsigned int Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Pete Zaitcev 提交于
This must be the weirdest failure yet. My external disk stops processing the storage commands the moment it receives a GET_REPORT. The firmware does not crash; if I do rmmod hid, then SET-INTERFACE restores normal operations. Still, I cannot live without the keyboard when I want backup my files. Adding the NOGET quirk fixes this problem for me. Signed-off-by: NPete Zaitcev <zaitcev@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This device has reports lower logical maximum compared to the real usages for Zoom+ and Zoom- it emits. This patch bumps the values in the report descriptor up, and also adjusts HID_MAX_USAGE accordingly. Reported-by: NKhelben Blackstaff <eye.of.the.8eholder@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jim Duchek 提交于
Microsoft's wireless desktop receiver (Model 1028) has a bug in the report descriptor -- namely, in four seperate places it uses USAGE_MIN and _MAX when it quite obviously doesn't intend to. In other words, it reports that it has pretty much _everything_ in 'consumer' and 'generic desktop'. And then the X evdev driver believes I have a mouse with 36 absolute axes and a huge pile of keys and buttons, when I in fact, should have zero. 255/256 in three of the cases, and 0-1024 in another. This patch fixes the report descriptor of this device before it enters the HID parser. Signed-off-by: NJim Duchek <jim.duchek@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Pekka Sarnila 提交于
Many vendors highspeed devices give erroneously fullspeed interval value in endpoint descriptor for interrupt endpoints. This quirk fixes up that by recalculating the right value for highspeed device. At the time of hid configuration this quirk calculates which highspeed interval value gives same interval delay as, or next smaller then, what it would be if the original value would be interpreted as fullspeed value. In subsequent urbs that new value is used instead. Forming the 'hid->name' in usb_hid_config() was moved up to accommodate more descriptive printk reporting the fixup. In this patch the quirk is set for one such device: Afatech DVB-T 2 infrared HID-keyboard. It reports value 16 which means 4,069s in highspeed while obviously 16ms was intended. In this case quirk calculates new value to be 8 which gives when interpreted as highspeed value 16ms as wanted. The behavior of the device was verified to be what expected both before and after the patch. Signed-off-by: NPekka Sarnila <sarnila@adit.fi> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jean Delvare 提交于
Fix build failure in hiddev_ioctl with gcc 3.2: http://bugzilla.kernel.org/show_bug.cgi?id=10121 The trick is to move the handling of ioctls which need to allocate memory to separate functions. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 16 4月, 2008 1 次提交
-
-
由 Guryanov Dmitry 提交于
USBHID driver only supports relative mode with this tablet so let aiptek module handle it. Signed-off-by: NDmitry Guryanov <guryanov@dgap.mipt.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 18 3月, 2008 3 次提交
-
-
由 Andrew Burton 提交于
Add quirk entry for BADPAD for the NATSU Playstation USB adapter. The adapter is supported under Linux, but with bad direction detection. Signed-off-by: NAndrew Burton <adb@iinet.net.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Julia Lawall 提交于
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Tobias Mueller 提交于
4th generation MacBook (product id 0x022a) from Apple doesn't need HID_QUIRK_APPLE_ISO_KEYBOARD fix anymore. Signed-off-by: NTobias Mueller <Tobias_Mueller@twam.info> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 14 2月, 2008 1 次提交
-
-
由 Tobias Mueller 提交于
Add support for Macbook 3rd generation special mappings. Signed-off-by: NTobias Mueller <Tobias_Mueller@twam.info> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 11 2月, 2008 1 次提交
-
-
由 Jiri Kosina 提交于
We need to blacklist this device, as it should be handled by ldusb driver. Reported-by: Nstephen <stephen.ware@eqware.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-