I tried the Linux Makefile 'make cscope' target, and found that the
generated database is not compatible with 'cscope.el' under XEmacs.
The thing is that 'cscope.el' does not allow setting the command line
options to the 'cscope' commands it runs, and it errors with a message
about the options not matching the ones used to generate the index.

It turns out the cscope designers already thought of this.  The
options can be written into the "cscope.files".  The included patch
moves the "-q" and "-k" options from the 'cmd_cscope' to the
'cmd_cscope-file', echoing them into the top of the files listing.

Now the index is generated with the "-q" option, and when 'cscope.el'
performs it's search, it uses that argument as well.  Lookups are fast
and everyone is happy.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

On ia64, only the EFI (fat) partition is available to boot from.  The rpm
needs to install the kernel under /boot/efi to be useable on ia64.
Signed-off-by: NGreg Edwards <edwardsg@sgi.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Recently a change in the glibc elf.h header has been introduced causing
modpost to spawn tons of warnings (like the one below) building the kernel
on sparc:

[SNIP]
*** Warning: "current_thread_info_reg" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
*** Warning: "" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
*** Warning: "" [net/sunrpc/auth_gss/auth_rpcgss.ko] undefined!
[SNIP]

Ben Collins discovered that the STT_REGISTERED definition in glibc did change
and that this change needs to be propagated to modpost.

glibc change:
-#define STT_REGISTER   13              /* Global register reserved to app. */
+#define STT_SPARC_REGISTER     13      /* Global register reserved to app. */

I did and tested this simple patch to maintain compatibility with newer (>= 2.3.4)
and older (<= 2.3.2) glibc.
Signed-off-by: NFabio M. Di Nitto <fabbione@fabbione.net>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

It adds tarball packaging, which I prefer for distribution.
Also one of the two blanks after @echo is removed. One seems to be enough :)
Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current assign_irq_vector() will panic if interrupt vectors is running
out. But I think how to handle the case of lack of interrupt vectors
should be handled by the caller of this function. For example, some
PCI devices can raise the interrupt signal via both MSI and I/O
APIC. So even if the driver for these device fails to allocate a
vector for MSI, the driver still has a chance to use I/O APIC based
interrupt. But currently there is no chance for these driver to use
I/O APIC based interrupt because kernel will panic when
assign_irq_vector() fails to allocate interrupt vector.

The following patch changes assign_irq_vector() for ia64 to return
-ENOSPC on error instead of panic (as i386 and x86_64 versions do).
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Description: Replace schedule_timeout() with msleep_interruptible() to
guarantee the task delays as expected.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NDean Nelson <dcn@sgi.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NMiles Bader <miles@gnu.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NMiles Bader <miles@gnu.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also fix a bug in 32-bit syscall tracing.  We forgot to update
this code when we moved over to the convention that all 32-bit
syscall arguments are zero extended by default.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that sys_ipc has been removed from xtensa, asm/ipc.h is no longer
needed for that architecture.  Not tested, but obviously correct.  This
file is included only from arch code and this patch also removes the only
inclusion.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Lots of this patch is trivial code cleanups (static vars were being
intialized to 0, etc).

There's also some fixes for ISO transmits (max buffer handling).
Aswell, we have a few fixes to disable IRM capabilites correctly.  We've
also disabled, by default some generally unused EXPORT symbols for the
sake of cleanliness in the kernel.  However, instead of removing them
completely, we felt it necessary to have a config option that allowed
them to be enabled for the many projects outside of the main kernel tree
that use our API for driver development.

The primary reason for this patch is to revert a MODE6->MODE10 RBC
conversion patch from the SCSI maintainers.  The new conversions handled
directly in the scsi layer do not seem to work for SBP2.  This patch
reverts to our old working code so that users can enjoy using Firewire
disks and dvd drives again.

We are working with the SCSI maintainers to resolve this issue outside
of the main kernel tree.  We'll merge the patch once the SCSI layer's
handling of the MODE10 conversion is working for us.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Patch from Tony Lindgren

This patch adds minimal cpufreq support for OMAP
taking advantage of the clock framework.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch updates H2 defconfig.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific arch files with the linux-omap tree.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific arch files with the linux-omap tree.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch move common OMAP code from arch-omap to plat-omap
directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by Juha Yrjölä and other OMAP developers splits
OMAP1 specific common code into OMAP1 id, io, and serial
code in mach-omap1 directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 board files into mach-omap1 directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 specific LED code into mach-omap1 directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 specific IRQ, time, and FPGA code into
mach-omap1 directory.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers modifies
ARM specific Kconfig to allow sharing code between OMAP1 and
OMAP2 architectures.
In order to share code between OMAP1 and OMAP2, all OMAP1
specific code is moved into mach-omap1 directory in the
following patch. A new mach-omap2 directory will be added
later on.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific include files with the linux-omap tree.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Deepak Saxena

The code in mm-armv.c checks for the condition (cpu_architecture()<= ARMv5)
in a few places but should be checking for ARMv5TEJ as the MMU is shared
across all v5 variations.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Update the ixp2000 defconfigs from 2.6.12-git6 to 2.6.13-rc2.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch converts the ixp2000 serial port over to a platform
serial device.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>