- 16 7月, 2016 2 次提交
-
-
由 Sowmini Varadhan 提交于
Some code duplication in rds_tcp_reset_callbacks() can be avoided by having the function call rds_tcp_restore_callbacks() and rds_tcp_set_callbacks(). Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
As the existing comments in rds_tcp_listen_data_ready() indicate, it is possible under some race-windows to get to this function with the accept() socket. If that happens, we could run into a sequence whereby thread 1 thread 2 rds_tcp_accept_one() thread sets up new_sock via ->accept(). The sk_user_data is now sock_def_readable data comes in for new_sock, ->sk_data_ready is called, and we land in rds_tcp_listen_data_ready rds_tcp_set_callbacks() takes the sk_callback_lock and sets up sk_user_data to be the cp read_lock sk_callback_lock ready = cp unlock sk_callback_lock page fault on ready In the above sequence, we end up with a panic on a bad page reference when trying to execute (*ready)(). Instead we need to call sock_def_readable() safely, which is what this patch achieves. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2016 1 次提交
-
-
由 Vegard Nossum 提交于
If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa153 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: stable@vger.kernel.org Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2016 7 次提交
-
-
由 Sowmini Varadhan 提交于
This patch adds ->conn_path_connect callbacks in the rds_transport that are used to set up a single connection path. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The ->sk_user_data contains a pointer to the rds_conn_path for the socket. Use this consistently in the rds_tcp_data_ready callbacks to get the rds_conn_path for rds_recv_incoming. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The socket callbacks should all operate on a struct rds_conn_path, in preparation for a MP capable RDS-TCP. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
A single rds_connection may have multiple rds_conn_paths that have to be carefully and correctly destroyed, for both rmmod and netns-delete cases. For both cases, we extract a single rds_tcp_connection for each conn into a temporary list, and then invoke rds_conn_destroy() which iteratively dismantles every path in the rds_connection. For the netns deletion case, we additionally have to make sure that we do not leave a socket in TIME_WAIT state, as this will hold up the netns deletion. Thus we call rds_tcp_conn_paths_destroy() to reset state quickly. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The struct rds_tcp_connection is the transport-specific private data structure that tracks TCP information per rds_conn_path. Modify this structure to have a back-pointer to the rds_conn_path for which it is the ->cp_transport_data. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The c_passive bit is only intended for the IB transport and will never be encountered in rds-tcp, so remove the dead logic that predicates on this bit. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Refactor code to avoid separate indirections for single-path and multipath transports. All transports (both single and mp-capable) will get a pointer to the rds_conn_path, and can trivially derive the rds_connection from the ->cp_conn. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2016 1 次提交
-
-
由 Wei Yongjun 提交于
Fixes the following sparse warnings: net/rds/tcp.c:59:5: warning: symbol 'rds_tcp_min_sndbuf' was not declared. Should it be static? net/rds/tcp.c:60:5: warning: symbol 'rds_tcp_min_rcvbuf' was not declared. Should it be static? Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2016 2 次提交
-
-
由 Sowmini Varadhan 提交于
This commit changes rds_conn_shutdown to take a rds_conn_path * argument, allowing it to shutdown paths other than c_path[0] for MP-capable transports. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
In preparation for multipath RDS, split the rds_connection structure into a base structure, and a per-path struct rds_conn_path. The base structure tracks information and locks common to all paths. The workqs for send/recv/shutdown etc are tracked per rds_conn_path. Thus the workq callbacks now work with rds_conn_path. This commit allows for one rds_conn_path per rds_connection, and will be extended into multiple conn_paths in subsequent commits. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2016 3 次提交
-
-
由 Sowmini Varadhan 提交于
The send path needs to be quiesced before resetting callbacks from rds_tcp_accept_one(), and commit eb192840 ("RDS:TCP: Synchronize rds_tcp_accept_one with rds_send_xmit when resetting t_sock") achieves this using the c_state and RDS_IN_XMIT bit following the pattern used by rds_conn_shutdown(). However this leaves the possibility of a race window as shown in the sequence below take t_conn_lock in rds_tcp_conn_connect send outgoing syn to peer drop t_conn_lock in rds_tcp_conn_connect incoming from peer triggers rds_tcp_accept_one, conn is marked CONNECTING wait for RDS_IN_XMIT to quiesce any rds_send_xmit threads call rds_tcp_reset_callbacks [.. race-window where incoming syn-ack can cause the conn to be marked UP from rds_tcp_state_change ..] lock_sock called from rds_tcp_reset_callbacks, and we set t_sock to null As soon as the conn is marked UP in the race-window above, rds_send_xmit() threads will proceed to rds_tcp_xmit and may encounter a null-pointer deref on the t_sock. Given that rds_tcp_state_change() is invoked in softirq context, whereas rds_tcp_reset_callbacks() is in workq context, and testing for RDS_IN_XMIT after lock_sock could result in a deadlock with tcp_sendmsg, this commit fixes the race by using a new c_state, RDS_TCP_RESETTING, which will prevent a transition to RDS_CONN_UP from rds_tcp_state_change(). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
When we switch a connection's sockets in rds_tcp_rest_callbacks, any partially sent datagram must be retransmitted on the new socket so that the receiver can correctly reassmble the RDS datagram. Use rds_send_reset() which is designed for this purpose. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
When rds_tcp_accept_one() has to replace the existing tcp socket with a newer tcp socket (duelling-syn resolution), it must lock_sock() to suppress the rds_tcp_data_recv() path while callbacks are being changed. Also, existing RDS datagram reassembly state must be reset, so that the next datagram on the new socket does not have corrupted state. Similarly when resetting the newly accepted socket, appropriate locks and synchronization is needed. This commit ensures correct synchronization by invoking kernel_sock_shutdown to reset a newly accepted sock, and by taking appropriate lock_sock()s (for old and new sockets) when resetting existing callbacks. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2016 2 次提交
-
-
由 Sowmini Varadhan 提交于
An arbitration scheme for duelling SYNs is implemented as part of commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") which ensures that both nodes involved will arrive at the same arbitration decision. However, this needs to be synchronized with an outgoing SYN to be generated by rds_tcp_conn_connect(). This commit achieves the synchronization through the t_conn_lock mutex in struct rds_tcp_connection. The rds_conn_state is checked in rds_tcp_conn_connect() after acquiring the t_conn_lock mutex. A SYN is sent out only if the RDS connection is not already UP (an UP would indicate that rds_tcp_accept_one() has completed 3WH, so no SYN needs to be generated). Similarly, the rds_conn_state is checked in rds_tcp_accept_one() after acquiring the t_conn_lock mutex. The only acceptable states (to allow continuation of the arbitration logic) are UP (i.e., outgoing SYN was SYN-ACKed by peer after it sent us the SYN) or CONNECTING (we sent outgoing SYN before we saw incoming SYN). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
There is a race condition between rds_send_xmit -> rds_tcp_xmit and the code that deals with resolution of duelling syns added by commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()"). Specifically, we may end up derefencing a null pointer in rds_send_xmit if we have the interleaving sequence: rds_tcp_accept_one rds_send_xmit conn is RDS_CONN_UP, so invoke rds_tcp_xmit tc = conn->c_transport_data rds_tcp_restore_callbacks /* reset t_sock */ null ptr deref from tc->t_sock The race condition can be avoided without adding the overhead of additional locking in the xmit path: have rds_tcp_accept_one wait for rds_tcp_xmit threads to complete before resetting callbacks. The synchronization can be done in the same manner as rds_conn_shutdown(). First set the rds_conn_state to something other than RDS_CONN_UP (so that new threads cannot get into rds_tcp_xmit()), then wait for RDS_IN_XMIT to be cleared in the conn->c_flags indicating that any threads in rds_tcp_xmit are done. Fixes: 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 3月, 2016 2 次提交
-
-
由 Sowmini Varadhan 提交于
RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14 ("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune"). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Add per-net sysctl tunables to set the size of sndbuf and rcvbuf on the kernel tcp socket. The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf. These values must be set before accept() or connect(), and there may be an arbitrary number of existing rds-tcp sockets when the tunable is modified. To make sure that all connections in the netns pick up the same value for the tunable, we reset existing rds-tcp connections in the netns, so that they can reconnect with the new parameters. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2016 1 次提交
-
-
由 stephen hemminger 提交于
Duplicate include detected. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2015 1 次提交
-
-
由 Sowmini Varadhan 提交于
Using the value of RDS_TCP_DEFAULT_BUFSIZE (128K) clobbers efficient use of TSO because it inflates the size_goal that is computed in tcp_sendmsg/tcp_sendpage and skews packet latency, and the default values for these parameters actually results in significantly better performance. In request-response tests using rds-stress with a packet size of 100K with 16 threads (test parameters -q 100000 -a 256 -t16 -d16) between a single pair of IP addresses achieves a throughput of 6-8 Gbps. Without this patch, throughput maxes at 2-3 Gbps under equivalent conditions on these platforms. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 8月, 2015 2 次提交
-
-
由 Sowmini Varadhan 提交于
Register pernet subsys init/stop functions that will set up and tear down per-net RDS-TCP listen endpoints. Unregister pernet subusys functions on 'modprobe -r' to clean up these end points. Enable keepalive on both accept and connect socket endpoints. The keepalive timer expiration will ensure that client socket endpoints will be removed as appropriate from the netns when an interface is removed from a namespace. Register a device notifier callback that will clean up all sockets (and thus avoid the need to wait for keepalive timeout) when the loopback device is unregistered from the netns indicating that the netns is getting deleted. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Open the sockets calling sock_create_kern() with the correct struct net pointer, and use that struct net pointer when verifying the address passed to rds_bind(). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
With calls to modular infrastructure, these files really needs the full module.h header. Call it out so some of the cleanups of implicit and unrequired includes elsewhere can be cleaned up. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 04 11月, 2010 1 次提交
-
-
由 Pavel Emelyanov 提交于
All the rds_tcp_connection objects are stored list, but when being freed it should be removed from there. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2010 1 次提交
-
-
由 stephen hemminger 提交于
The RDS protocol has lots of functions that should be declared static. rds_message_get/add_version_extension is removed since it defined but never used. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2010 4 次提交
-
-
由 Zach Brown 提交于
The trivial amount of memory saved isn't worth the cost of dealing with section mismatches. Signed-off-by: NZach Brown <zach.brown@oracle.com>
-
由 Andy Grover 提交于
We now ask the transport to give us a rm for the congestion map, and then we handle it normally. Previously, the transport defined a function that we would call to send a congestion map. Convert TCP and loop transports to new cong map method. Signed-off-by: NAndy Grover <andy.grover@oracle.com>
-
由 Andy Grover 提交于
Signed-off-by: NAndy Grover <andy.grover@oracle.com>
-
由 Andy Grover 提交于
Favor "if (foo)" style over "if (foo != NULL)". Signed-off-by: NAndy Grover <andy.grover@oracle.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 24 8月, 2009 2 次提交
-
-
由 Andy Grover 提交于
Now that transports can be loaded in arbitrary order, it is important for rds_trans_get_preferred() to look for them in a particular order, instead of walking the list until it finds a transport that works for a given address. Now, each transport registers for a specific transport slot, and these are ordered so that preferred transports come first, and then if they are not loaded, other transports are queried. Signed-off-by: NAndy Grover <andy.grover@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Grover 提交于
This code allows RDS to be tunneled over a TCP connection. RDMA operations are disabled when using TCP transport, but this frees RDS from the IB/RDMA stack dependency, and allows it to be used with standard Ethernet adapters, or in a VM. Signed-off-by: NAndy Grover <andy.grover@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-