- eliminate the needless es7000_enable_apic_mode() complication which
  was not apparent prior the namespace cleanups

- clean up the control flow in es7000_enable_apic_mode()

- other cleanups
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rename genapic-> to apic-> references because in a future chagne we'll
open-code all the indirect calls (instead of obscuring them via macros),
so we want this reference to be as short as possible.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

We can autodetect those system that need cluster apic, and update genapic
accordingly.

We can also remove wakeup.h for e7000, because it's default one is now
the same as overall default mach_wakecpu.h
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix wakeup_secondary_cpu with hotplug

We can not put that into x86_quirks, because that is __initdata.
So try to move that to genapic, and add update_genapic in x86_quirks.

later we even could use that stub to:

 1. autodetect CONFIG_ES7000_CLUSTERED_APIC
 2. more correct inquire_remote_apic with apic_verbosity setting.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix secondary-CPU wakeup/init path with numaq and es7000

While looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI:

|#ifdef WAKE_SECONDARY_VIA_NMI
|/*
| * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
| * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
| * won't ... remember to clear down the APIC, etc later.
| */
|static int __devinit
|wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
|{
|        unsigned long send_status, accept_status = 0;
|        int maxlvt;
|...
|        if (APIC_INTEGRATED(apic_version[phys_apicid])) {
|                maxlvt = lapic_get_maxlvt();

I noticed that there is no warning about undefined phys_apicid...

because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_INIT can not be
defined at the same time. So NUMAQ is using wrong wakeup_secondary_cpu.

WAKE_SECONDARY_VIA_NMI, WAKE_SECONDARY_VIA_INIT and
WAKE_SECONDARY_VIA_MIP are variants of a weird and fragile
preprocessor-driven "HAL" mechanisms to specify the kind of secondary-CPU
wakeup strategy a given x86 kernel will use.

The vast majority of systems want to use INIT for secondary wakeup - NUMAQ
uses an NMI, (old-style-) ES7000 uses 'MIP' (a firmware driven in-memory
flag to let secondaries continue).

So convert these mechanisms to x86_quirks and add a
->wakeup_secondary_cpu() method to specify the rare exception
to the sane default.

Extend genapic accordingly as well, for 32-bit.

While looking further, I noticed that functions in wakecup.h for numaq
and es7000 are different to the default in mach_wakecpu.h - but smpboot.c
will only use default mach_wakecpu.h with smphook.h.

So we need to add mach_wakecpu.h for mach_generic, to properly support
numaq and es7000, and vectorize the following SMP init methods:

	int trampoline_phys_low;
	int trampoline_phys_high;
	void (*wait_for_init_deassert)(atomic_t *deassert);
	void (*smp_callin_clear_local_apic)(void);
	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*inquire_remote_apic)(int apicid);
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix es7000 build

  CC      arch/x86/kernel/es7000_32.o
arch/x86/kernel/es7000_32.c: In function find_unisys_acpi_oem_table:
arch/x86/kernel/es7000_32.c:255: error: implicit declaration of function acpi_get_table_with_size
arch/x86/kernel/es7000_32.c:261: error: implicit declaration of function early_acpi_os_unmap_memory
arch/x86/kernel/es7000_32.c: In function unmap_unisys_acpi_oem_table:
arch/x86/kernel/es7000_32.c:277: error: implicit declaration of function __acpi_unmap_table
make[1]: *** [arch/x86/kernel/es7000_32.o] Error 1

we applied one patch out of order...

| commit a73aaedd
| Author: Yinghai Lu <yhlu.kernel@gmail.com>
| Date:   Sun Sep 14 02:33:14 2008 -0700
|
|    x86: check dsdt before find oem table for es7000, v2
|
|    v2: use __acpi_unmap_table()

that patch need:

	x86: use early_ioremap in __acpi_map_table
	x86: always explicitly map acpi memory
	acpi: remove final __acpi_map_table mapping before setting acpi_gbl_permanent_mmap
	acpi/x86: introduce __apci_map_table, v4

submitted to the ACPI tree but not upstream yet.

fix it until those patches applied, need to revert this one
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

v2: use __acpi_unmap_table()
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

to be aligned with numaq, summit.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

... so it could fall back to normal numa and we'd reduce the impact of the
NUMAQ subarch.

NUMAQ depends on GENERICARCH
also decouple genericarch numa from acpi.
also make it fall back to bigsmp if apicid > 8.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch contains the following cleanups:
- make some needlessly global functions static
- #if 0 the unused es7000_stop_cpu()

AK: actually removed es7000_stop_cpu
AK: fixed a non ISO prototype too

[ tglx: arch/x86 adaptation ]
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

o Commit 1833d6bc broke the build if
  compiled with CONFIG_ES7000=y and CONFIG_X86_GENERICARCH=n

arch/i386/kernel/built-in.o(.init.text+0x4fa9): In function `acpi_parse_madt':
: undefined reference to `acpi_madt_oem_check'
arch/i386/kernel/built-in.o(.init.text+0x7406): In function `smp_read_mpc':
: undefined reference to `mps_oem_check'
arch/i386/kernel/built-in.o(.init.text+0x8990): In function
`connect_bsp_APIC':
: undefined reference to `enable_apic_mode'
make: *** [.tmp_vmlinux1] Error 1

o Fix the build issue. Provided the definitions of missing functions.

o Don't have ES7000 machine. Only compile tested.

Cc: Len Brown <lenb@kernel.org>
Cc: Natalie Protasevich <protasnb@gmail.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NLen Brown <len.brown@intel.com>

ES7000 platform code clean up for compilation errors and a warning.
Ifdef'd the ACPI related parts in the ES7000 platform code.  They were
causing compile errors in certain configuration (without ACPI defined).  I
think this approach would be best (as opposed to Kconfig changes) since it
only touches the subarch...

Signed-off-by: <Natalie.Protasevich@unisys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is platform code update for ES7000: disables IRQ overrides for the
recent ES7000 (Rascal/Zorro), cleans up the compile warning.  The patch
only affects the ES7000 subarch.

Signed-off-by: <Natalie.Protasevich@unisys.com>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is subarch update for ES7000.  I've modified platform check code and
removed unnecessary OEM table parsing for newer systems that don't use OEM
information during boot.  Parsing the table in fact is causing problems,
and the platform doesn't get recognized.  The patch only affects the ES7000
subach.

Signed-off-by: <Natalie.Protasevich@unisys.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

it is a synonym for CONFIG_ACPI
Signed-off-by: NLen Brown <len.brown@intel.com>

it has been a synonym for CONFIG_ACPI since 2.6.12
Signed-off-by: NLen Brown <len.brown@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!