Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 21 9月, 2019 7 次提交
    • S
      media: tm6000: double free if usb disconnect while streaming · abf389e0
      由 Sean Young 提交于 
      commit 699bf94114151aae4dceb2d9dbf1a6312839dcae upstream.

The usb_bulk_urb will kfree'd on disconnect, so ensure the pointer is set
to NULL after each free.

stop stream
urb killing
urb buffer free
tm6000: got start feed request tm6000_start_feed
tm6000: got start stream request tm6000_start_stream
tm6000: pipe reset
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: IR URB failure: status: -71, length 0
xhci_hcd 0000:00:14.0: ERROR unknown event type 37
xhci_hcd 0000:00:14.0: ERROR unknown event type 37
tm6000:  error tm6000_urb_received
usb 1-2: USB disconnect, device number 5
tm6000: disconnecting tm6000 #0
==================================================================
BUG: KASAN: use-after-free in dvb_fini+0x75/0x140 [tm6000_dvb]
Read of size 8 at addr ffff888241044060 by task kworker/2:0/22

CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G        W         5.3.0-rc4+ #1
Hardware name: LENOVO 20KHCTO1WW/20KHCTO1WW, BIOS N23ET65W (1.40 ) 07/02/2019
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack+0x9a/0xf0
 print_address_description.cold+0xae/0x34f
 __kasan_report.cold+0x75/0x93
 ? tm6000_fillbuf+0x390/0x3c0 [tm6000_alsa]
 ? dvb_fini+0x75/0x140 [tm6000_dvb]
 kasan_report+0xe/0x12
 dvb_fini+0x75/0x140 [tm6000_dvb]
 tm6000_close_extension+0x51/0x80 [tm6000]
 tm6000_usb_disconnect.cold+0xd4/0x105 [tm6000]
 usb_unbind_interface+0xe4/0x390
 device_release_driver_internal+0x121/0x250
 bus_remove_device+0x197/0x260
 device_del+0x268/0x550
 ? __device_links_no_driver+0xd0/0xd0
 ? usb_remove_ep_devs+0x30/0x3b
 usb_disable_device+0x122/0x400
 usb_disconnect+0x153/0x430
 hub_event+0x800/0x1e40
 ? trace_hardirqs_on_thunk+0x1a/0x20
 ? hub_port_debounce+0x1f0/0x1f0
 ? retint_kernel+0x10/0x10
 ? lock_is_held_type+0xf1/0x130
 ? hub_port_debounce+0x1f0/0x1f0
 ? process_one_work+0x4ae/0xa00
 process_one_work+0x4ba/0xa00
 ? pwq_dec_nr_in_flight+0x160/0x160
 ? do_raw_spin_lock+0x10a/0x1d0
 worker_thread+0x7a/0x5c0
 ? process_one_work+0xa00/0xa00
 kthread+0x1d5/0x200
 ? kthread_create_worker_on_cpu+0xd0/0xd0
 ret_from_fork+0x3a/0x50

Allocated by task 2682:
 save_stack+0x1b/0x80
 __kasan_kmalloc.constprop.0+0xc2/0xd0
 usb_alloc_urb+0x28/0x60
 tm6000_start_feed+0x10a/0x300 [tm6000_dvb]
 dmx_ts_feed_start_filtering+0x86/0x120 [dvb_core]
 dvb_dmxdev_start_feed+0x121/0x180 [dvb_core]
 dvb_dmxdev_filter_start+0xcb/0x540 [dvb_core]
 dvb_demux_do_ioctl+0x7ed/0x890 [dvb_core]
 dvb_usercopy+0x97/0x1f0 [dvb_core]
 dvb_demux_ioctl+0x11/0x20 [dvb_core]
 do_vfs_ioctl+0x5d8/0x9d0
 ksys_ioctl+0x5e/0x90
 __x64_sys_ioctl+0x3d/0x50
 do_syscall_64+0x74/0xe0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 22:
 save_stack+0x1b/0x80
 __kasan_slab_free+0x12c/0x170
 kfree+0xfd/0x3a0
 xhci_giveback_urb_in_irq+0xfe/0x230
 xhci_td_cleanup+0x276/0x340
 xhci_irq+0x1129/0x3720
 __handle_irq_event_percpu+0x6e/0x420
 handle_irq_event_percpu+0x6f/0x100
 handle_irq_event+0x55/0x84
 handle_edge_irq+0x108/0x3b0
 handle_irq+0x2e/0x40
 do_IRQ+0x83/0x1a0

Cc: stable@vger.kernel.org
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      abf389e0
    • A
      USB: usbcore: Fix slab-out-of-bounds bug during device reset · 77d4e2a0
      由 Alan Stern 提交于 
      commit 3dd550a2d36596a1b0ee7955da3b611c031d3873 upstream.

The syzbot fuzzer provoked a slab-out-of-bounds error in the USB core:

BUG: KASAN: slab-out-of-bounds in memcmp+0xa6/0xb0 lib/string.c:904
Read of size 1 at addr ffff8881d175bed6 by task kworker/0:3/2746

CPU: 0 PID: 2746 Comm: kworker/0:3 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  memcmp+0xa6/0xb0 lib/string.c:904
  memcmp include/linux/string.h:400 [inline]
  descriptors_changed drivers/usb/core/hub.c:5579 [inline]
  usb_reset_and_verify_device+0x564/0x1300 drivers/usb/core/hub.c:5729
  usb_reset_device+0x4c1/0x920 drivers/usb/core/hub.c:5898
  rt2x00usb_probe+0x53/0x7af
drivers/net/wireless/ralink/rt2x00/rt2x00usb.c:806

The error occurs when the descriptors_changed() routine (called during
a device reset) attempts to compare the old and new BOS and capability
descriptors.  The length it uses for the comparison is the
wTotalLength value stored in BOS descriptor, but this value is not
necessarily the same as the length actually allocated for the
descriptors.  If it is larger the routine will call memcmp() with a
length that is too big, thus reading beyond the end of the allocated
region and leading to this fault.

The kernel reads the BOS descriptor twice: first to get the total
length of all the capability descriptors, and second to read it along
with all those other descriptors.  A malicious (or very faulty) device
may send different values for the BOS descriptor fields each time.
The memory area will be allocated using the wTotalLength value read
the first time, but stored within it will be the value read the second
time.

To prevent this possibility from causing any errors, this patch
modifies the BOS descriptor after it has been read the second time:
It sets the wTotalLength field to the actual length of the descriptors
that were read in and validated.  Then the memcpy() call, or any other
code using these descriptors, will be able to rely on wTotalLength
being valid.

Reported-and-tested-by: syzbot+35f4d916c623118d576e@syzkaller.appspotmail.com
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909041154260.1722-100000@iolanthe.rowland.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      77d4e2a0
    • A
      powerpc/mm/radix: Use the right page size for vmemmap mapping · b01b1eb2
      由 Aneesh Kumar K.V 提交于 
      commit 89a3496e0664577043666791ec07fb731d57c950 upstream.

We use mmu_vmemmap_psize to find the page size for mapping the vmmemap area.
With radix translation, we are suboptimally setting this value to PAGE_SIZE.

We do check for 2M page size support and update mmu_vmemap_psize to use
hugepage size but we suboptimally reset the value to PAGE_SIZE in
radix__early_init_mmu(). This resulted in always mapping vmemmap area with
64K page size.

Fixes: 2bfd65e4 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b01b1eb2
    • B
      Input: elan_i2c - remove Lenovo Legion Y7000 PnpID · 289f3c82
      由 Benjamin Tissoires 提交于 
      commit 0c043d70d04711fe6c380df9065fdc44192c49bf upstream.

Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B
when the actual device is supposed to be used with hid-multitouch.

Remove it from the list of the supported device, hoping that
no one will complain about the loss in functionality.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467
Fixes: 738c06d0e456 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops")
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      289f3c82
    • L
      RDMA/restrack: Release task struct which was hold by CM_ID object · 305c3b49
      由 Leon Romanovsky 提交于 
      commit ed7a01fd3fd77f40b4ef2562b966a5decd8928d2 upstream.

Tracking CM_ID resource is performed in two stages: creation of cm_id
and connecting it to the cma_dev. It is needed because rdma-cm protocol
exports two separate user-visible calls rdma_create_id and rdma_accept.

At the time of CM_ID creation, the real owner of that object is unknown
yet and we need to grab task_struct. This task_struct is released or
reassigned in attach phase later on. but call to rdma_destroy_id left
this task_struct unreleased.

Such separation is unique to CM_ID and other restrack objects initialize
in one shot. It means that it is safe to use "res->valid" check to catch
unfinished CM_ID flow and release task_struct for that object.

Fixes: 00313983 ("RDMA/nldev: provide detailed CM_ID information")
Reported-by: NArtemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: NYossi Itigin <yosefe@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Cc: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      305c3b49
    • A
      HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report · 8993c673
      由 Aaron Armstrong Skomra 提交于 
      commit 184eccd40389df29abefab88092c4ff33191fd0c upstream.

In the generic code path, HID_DG_CONTACTMAX was previously
only read from the second byte of report 0x23.

Another report (0x82) has the HID_DG_CONTACTMAX in the
higher nibble of the third byte. We should support reading the
value of HID_DG_CONTACTMAX no matter what report we are reading
or which position that value is in.

To do this we submit the feature report as a event report
using hid_report_raw_event(). Our modified finger event path
records the value of HID_DG_CONTACTMAX when it sees that usage.

Fixes: 8ffffd52 ("HID: wacom: fix timeout on probe for some wacoms")
Signed-off-by: NAaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8993c673
    • P
      netfilter: nf_flow_table: set default timeout after successful insertion · 2a0aa8a0
      由 Pablo Neira Ayuso 提交于 
      commit 110e48725db6262f260f10727d0fb2d3d25895e4 upstream.

Set up the default timeout for this new entry otherwise the garbage
collector might quickly remove it right after the flowtable insertion.

Fixes: ac2a6666 ("netfilter: add generic flow table infrastructure")
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2a0aa8a0
  3. 19 9月, 2019 33 次提交