- local caching of smp_processor_id() in default_do_nmi()
 - v2: do not split default_do_nmi over two lines

On Wed, Jul 02, 2008 at 08:12:20PM +0400, Cyrill Gorcunov wrote:
> | -static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
> | +static notrace __kprobes void
> | +default_do_nmi(struct pt_regs *regs)
> | [ ... ]
> | -asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
> | +asmlinkage notrace __kprobes void
> | +default_do_nmi(struct pt_regs *regs)
>
> Hi Alexander, good done, thanks! But why did you split default_do_nmi
> definition by two lines? I think it would be better to keep them as it
> was before, ie by a single line
>
> 	static notrace __kprobes void default_do_nmi(struct pt_regs *regs)

Thanks! Here is the replacement patch with default_do_nmi left on
a single line.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

 - if (cond) block -> if (!cond) goto end_of_block
 - local caching of current
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

if (cond) block -> if (!cond) goto end_of_block
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

if (cond) block -> if (!cond) goto end_of_block
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reorder headers and collect globals in traps_32.c and traps_64.c

Code size and data size are unaffected by the changes. Code
itself is changed due to different ordering of data and bss.
The bss segment changed size due to a change in the packing
of the variables.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch does not change the generated object files.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rename the paravirtualized calculate_cpu_khz to calibrate_tsc.
In all cases, we actually calibrate_tsc and use that as the cpu_khz value.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unify the clocksource code.
Unify the tsc_init code.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Unify the TSC cpufreq code.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge the tsc calibration code for the 32bit and 64bit kernel.
The paravirtualized calculate_cpu_khz for 64bit now points to the correct
tsc_calibrate code as in 32bit.
Original native_calculate_cpu_khz for 64 bit is now called as calibrate_cpu.

Also moved the recalibrate_cpu_khz function in the common file.
Note that this function is called only from powernow K7 cpu freq driver.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move the basic global variable definitions and sched_clock handling in the
common "tsc.c" file.

 - Unify notsc kernel command line handling for 32 bit and 64bit.
 - Functional changes for 64bit.
        - "tsc_disabled" is updated if "notsc" is passed at boottime.
        - Fallback to jiffies for sched_clock, incase notsc is passed on
	  commandline.
Signed-off-by: NAlok N Kataria <akataria@vmware.com>
Signed-off-by: NDan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add lapic resource into kernel resource map and mark it as busy
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
CC: Maciej W. Rozycki <macro@linux-mips.org>

This patch updates the X86 mmr list for SGI uv.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Create page table entries to map the SGI UV chipset GRU. local MMR &
global MMR ranges.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add boot-time function for creating additional 2MB page table entries for
mapping chipset specific cached/uncached ranges.
Signed-off-by: NJack Steiner <steiner@sgi.com>
Cc: linux-mm@kvack.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

so when it is called after early_param, e820_saved get updated too.
esp for mpc update.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

seperate reserve_setup_data into e820_reserved_setup_data,
and reserve_early_setup_data.

So could use e820_reserved_setup_data to backup e820 with setup_data.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Ying Huang <ying.huang@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

so other path that will override memory_setup or
machine_specific_memory_setup could have e820_saved too.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch uses the /sys/firmware/memmap interface provided in the last patch
on the x86 architecture when E820 is used. The patch copies the E820
memory map very early, and registers the E820 map afterwards via
firmware_map_add_early().
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Acked-by: NGreg KH <gregkh@suse.de>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds /sys/firmware/memmap interface that represents the BIOS
(or Firmware) provided memory map. The tree looks like:

    /sys/firmware/memmap/0/start   (hex number)
                           end     (hex number)
                           type    (string)
    ...                 /1/start
                           end
                           type

With the following shell snippet one can print the memory map in the same form
the kernel prints itself when booting on x86 (the E820 map).

  --------- 8< --------------------------
    #!/bin/sh
    cd /sys/firmware/memmap
    for dir in * ; do
        start=$(cat $dir/start)
        end=$(cat $dir/end)
        type=$(cat $dir/type)
        printf "%016x-%016x (%s)\n" $start $[ $end +1] "$type"
    done
  --------- >8 --------------------------

That patch only provides the needed interface:

 1. The sysfs interface.
 2. The structure and enumeration definition.
 3. The function firmware_map_add() and firmware_map_add_early()
    that should be called from architecture code (E820/EFI, for
    example) to add the contents to the interface.

If the kernel is compiled without CONFIG_FIRMWARE_MEMMAP, the interface does
nothing without cluttering the architecture-specific code with #ifdef's.

The purpose of the new interface is kexec: While /proc/iomem represents
the *used* memory map (e.g. modified via kernel parameters like 'memmap'
and 'mem'), the /sys/firmware/memmap tree represents the unmodified memory
map provided via the firmware. So kexec can:

 - use the original memory map for rebooting,
 - use the /proc/iomem for setting up the ELF core headers for kdump
   case that should only represent the memory of the system.

The patch has been tested on i386 and x86_64.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Acked-by: NGreg KH <gregkh@suse.de>
Acked-by: NVivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use ACPI_NUMA directly

and move srat_32.c to mm/
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

we already have the same srat handling interface for 32bit.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

this symbol is needed by drivers/video/xen-fbfront.ko.

[ cherry-picked from tip/core/printk ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Rather than using _PAGE_GLOBAL - which not all CPUs support - to test
CPA, use one of the reserved-for-software-use PTE flags instead.  This
allows CPA testing to work on CPUs which don't support PGD.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Older x86-32 processors do not support global mappings (PGD), so must
only use it if the processor supports it.

The _PAGE_KERNEL* flags always have _PAGE_KERNEL set, since logically
we always want it set.

This is OK even on processors which do not support PGD, since all
_PAGE flags are masked with __supported_pte_mask before being turned
into a real in-pagetable pte.  On 32-bit systems, __supported_pte_mask
is initialized to not contain _PAGE_GLOBAL, and it is then added if
the CPU is found to support it.

The x86-32 code used to use __PAGE_KERNEL/__PAGE_KERNEL_EXEC for this
purpose, but they're now redundant and can be removed.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Consistently set _PAGE_GLOBAL in _PAGE_KERNEL flags.  This makes 32-
and 64-bit code consistent, and removes some special cases where
__PAGE_KERNEL* did not have _PAGE_GLOBAL set, causing confusion as a
result of the inconsistencies.

This patch only affects x86-64, which generally always supports PGD.
The x86-32 patch is next.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When allocating a new pud, unconditionally populate the pgd (why did
we bother to create a new pud if we weren't going to populate it?).

This will only happen if the pgd slot was empty, since any existing
pud will be reused.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

add back this line lost from trap_init():

        set_trap_gate(0,  &divide_error);
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

arch/x86/kernel/built-in.o: In function `setup_arch':
: undefined reference to `prefill_possible_map'
Signed-off-by: NIngo Molnar <mingo@elte.hu>

call it right after we are done with MADT/mptable handling, instead of
doing that in setup_per_cpu_areas() later on...

this way for_possible_cpu() can be used early.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

when acpi=off, cpu_to_apicid is ready after get_smp_config
so need to move init_cpu_to_node after it.

otherwise, we will get wrong cpu->node mapping, and it will rely on
amd_detect_cmp() to correct it - but that is too late as
setup_per_cpu_data is already called before that so  we will get
per_cpu_data on the wrong node.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

move out e820_register_active_regions from non numa zones_sizes_init()
and remove numa version zones_sizes_init().

and let 32 bit call remove_all_active_ranges() in setup_arch() directly
like 64-bit
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

so it has a more meaningful name.
also change it to static.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes a small bug in documentation: x86_64 also has now
the ability to build a relocatable kernel.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: kexec@lists.infradead.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch removes the need of the crashkernel=...@offset parameter to define
a fixed offset for crashkernel reservation. That feature can be used together
with a relocatable kernel where the kexec-tools relocate the kernel and
get the actual offset from /proc/iomem.

The use case is a kernel where the .text+.data+.bss is after 16M physical
memory (debug kernel with lockdep on x86_64 can cause that) which caused a
major pain in autoconfiguration in our distribution.

Also, that patch unifies crashdump architectures a bit since IA64 has
that semantics from the very beginning of the kdump port.
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: Bernhard Walle <bwalle@suse.de>
Cc: kexec@lists.infradead.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

e820_search_gap also take a end_addr parameter to limit search from
start_addr to end_addr.
Signed-off-by: NAloK N Kataria <akataria@vmware.com>
Acked-by: NYinghai Lu <yhlu.kernel@gmail.com>
Cc: "lenb@kernel.org" <lenb@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

  * When CONFIG_DEBUG_PER_CPU_MAPS is set, the node passed to
    node_to_cpumask and node_to_cpumask_ptr should be validated.
    If invalid, then a dump_stack is performed and a zero cpumask
    is returned.

v2: Slightly different version to remove a compiler warning.
v3: Redone to reflect moving setup.c -> setup_percpu.c
Signed-off-by: NMike Travis <travis@sgi.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Ingo Molnar wrote:
> -tip auto-testing found pagetable corruption (CPA self-test failure):
>
> [   32.956015] CPA self-test:
> [   32.958822]  4k 2048 large 508 gb 0 x 2556[ffff880000000000-ffff88003fe00000] miss 0
> [   32.964000] CPA ffff88001d54e000: bad pte 1d4000e3
> [   32.968000] CPA ffff88001d54e000: unexpected level 2
> [   32.972000] CPA ffff880022c5d000: bad pte 22c000e3
> [   32.976000] CPA ffff880022c5d000: unexpected level 2
> [   32.980000] CPA ffff8800200ce000: bad pte 200000e3
> [   32.984000] CPA ffff8800200ce000: unexpected level 2
> [   32.988000] CPA ffff8800210f0000: bad pte 210000e3
>
> config and full log can be found at:
>
>  http://redhat.com/~mingo/misc/config-Mon_Jun_30_11_11_51_CEST_2008.bad
>  http://redhat.com/~mingo/misc/log-Mon_Jun_30_11_11_51_CEST_2008.bad

Phew.  OK, I've worked this out.  Short version is that's it's a false
alarm, and there was no real failure here.  Long version:

    * I changed the code to create the physical mapping pagetables to
      reuse any existing mapping rather than replace it.   Specifically,
      reusing an pud pointed to by the pgd caused this symptom to appear.
    * The specific PUD being reused is the one created statically in
      head_64.S, which creates an initial 1GB mapping.
    * That mapping doesn't have _PAGE_GLOBAL set on it, due to the
      inconsistency between __PAGE_* and PAGE_*.
    * The CPA test attempts to clear _PAGE_GLOBAL, and then checks to
      see that the resulting range is 1) shattered into 4k pages, and 2)
      has no _PAGE_GLOBAL.
    * However, since it didn't have _PAGE_GLOBAL on that range to start
      with, change_page_attr_clear() had nothing to do, and didn't
      bother shattering the range,
    * resulting in the reported messages

The simple fix is to set _PAGE_GLOBAL in level2_ident_pgt.

An additional fix to make CPA testing more robust by using some other
pagetable bit (one of the unused available-to-software ones).  This
would solve spurious CPA test warnings under Xen which uses _PAGE_GLOBAL
for its own purposes (ie, not under guest control).

Also, we should revisit the use of _PAGE_GLOBAL in asm-x86/pgtable.h,
and use it consistently, and drop MAKE_GLOBAL.  The first time I
proposed it it caused breakages in the very early CPA code; with luck
that's all fixed now.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>