- 21 5月, 2015 1 次提交
-
-
由 Ira Weiny 提交于
Use the new common rdma_[start|end]_port functions instead of using local variables and figuring it out on the fly. Signed-off-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 19 5月, 2015 21 次提交
-
-
由 Ira Weiny 提交于
Previously start_port and end_port were defined in 2 places, cache.c and device.c and this prevented their use in other modules. Make these common functions, change the name to reflect the rdma name space, and update existing users. Signed-off-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_eth_ah() to help us check if the port of an IB device support Ethernet Address Handler. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_af_ib() to help us check if the port of an IB device support Native Infiniband Address. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_ib_mcast() to help us check if the port of an IB device support Infiniband Multicast. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_iw_cm() to help us check if the port of an IB device support IWARP Communication Manager. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_ib_cm() to help us check if the port of an IB device support Infiniband Communication Manager. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_ib_smi() to help us check if the port of an IB device support Infiniband Subnet Management Interface. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Introduce helper rdma_cap_ib_mad() to help us check if the port of an IB device support Infiniband Management Datagrams. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform rest part in IB-core cma. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Reform cma_acquire_dev() with management helpers, introduce cma_validate_port() to make the code more clean. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform mcast related part in IB-core cma. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform route related part in IB-core cma. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform cm related part in IB-core cma/ucm. Few checks focus on the device cm type rather than the port capability, directly pass port 1 works currently, but can't support mixing cm type device in future. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform IB-core verbs Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform IB-ulp ipoib. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform IB-core multicast. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform IB-core sa_query. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform IB-core cm. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Use raw management helpers to reform IB-core mad/agent/user_mad. Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Michael Wang 提交于
Add new callback query_protocol() and implement for each HW. Mapping List: node-type link-layer transport protocol nes RNIC ETH IWARP IWARP amso1100 RNIC ETH IWARP IWARP cxgb3 RNIC ETH IWARP IWARP cxgb4 RNIC ETH IWARP IWARP usnic USNIC_UDP ETH USNIC_UDP USNIC_UDP ocrdma IB_CA ETH IB IBOE mlx4 IB_CA IB/ETH IB IB/IBOE mlx5 IB_CA IB IB IB ehca IB_CA IB IB IB ipath IB_CA IB IB IB mthca IB_CA IB IB IB qib IB_CA IB IB IB Signed-off-by: NMichael Wang <yun.wang@profitbricks.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: NDoug Ledford <dledford@redhat.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 16 5月, 2015 1 次提交
-
-
由 Brian Norris 提交于
In commit 8ff16cf7 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: NBrian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: NStephen Warren <swarren@nvidia.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NMark Rutland <mark.rutland@arm.com>
-
- 15 5月, 2015 2 次提交
-
-
由 Andrew Morton 提交于
Reported-by: NFengguang Wu <fengguang.wu@gmail.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Brian Norris 提交于
Commit 2a6a28e7 ("mtd: Make MTD tests cancelable") accidentally clobbered any read failure reports. Coverity CID #1296020 Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
-
- 14 5月, 2015 3 次提交
-
-
由 Dave Airlie 提交于
This causes an oops as we haven't initialised the mst layer. Reported-by: NDave Jones <<davej@codemonkey.org.uk> Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jean Delvare 提交于
In function dmi_present(), dmi_walk_early() calls dmi_table(), which calls dmi_decode(), which ultimately calls dmi_save_uuid(). This last function makes a decision based on the value of global variable dmi_ver. The problem is that this variable is set right _after_ dmi_walk_early() returns. So dmi_save_uuid() always sees dmi_ver == 0 regardless of the actual version implemented. This causes /sys/class/dmi/id/product_uuid to always use the old ordering even on systems implementing DMI/SMBIOS 2.6 or later, which should use the new ordering. This is broken since kernel v3.8 for legacy DMI implementations and since kernel v3.10 for SMBIOS 2 implementations. SMBIOS 3 implementations with the 64-bit entry point are not affected. The first breakage does not matter much as in practice legacy DMI implementations are always for versions older than 2.6, which is when the UUID ordering changed. The second breakage is more problematic as it affects the vast majority of x86 systems manufactured since 2009. Signed-off-by: NJean Delvare <jdelvare@suse.de> Fixes: 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") Fixes: 79bae42d ("dmi_scan: refactor dmi_scan_machine(), {smbios,dmi}_present()") Acked-by: NZhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Artem Savkov <artem.savkov@gmail.com> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: stable@vger.kernel.org [v3.10+]
-
由 Jean Delvare 提交于
The trailing .x adds no information for the reader, and if anyone tries to parse that line, this is more work as they have 3 different formats to handle instead of 2. Plus, this makes backporting fixes harder. Signed-off-by: NJean Delvare <jdelvare@suse.de> Fixes: 95be58df ("firmware: dmi_scan: Use full dmi version for SMBIOS3") Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
-
- 13 5月, 2015 12 次提交
-
-
由 Lucas Stach 提交于
The irq chip functions use the irq chipdata directly as the base register address of the controller, so this should be passed in instead of a pointer to the array address holding the base address. This fixes Tegra20 CPUidle as now the un-/masking of IRQs at the LIC level works again, but more importantly it fixes the resulting memory corruption. Fixes: de3ce080 ' irqchip: tegra: Add DT-based support for legacy interrupt controller' Signed-off-by: NLucas Stach <dev@lynxeye.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1431202014-3136-1-git-send-email-dev@lynxeye.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David Ahern 提交于
Commit e2c65448 moved pm_qos_req to e1000_adapter. Add the header file that defines the struct. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Niklas Cassel 提交于
Don't do clock-mode-select if clk == NULL, since when building without CONFIG_HAVE_CLK, clk_get returns NULL and clk_get_rate returns 0. Doing clock-mode-select in this cause causes kszphy_probe to return -EINVAL and thus prevents the device from being probed. The original code (before regression) would return 0 when building without CONFIG_HAVE_CLK. Cc: stable <stable@vger.kernel.org> # 3.18+ Fixes: 1fadee0c ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031") Reviewed-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NJohan Hovold <johan@kernel.org> Signed-off-by: NNiklas Cassel <niklass@axis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
Revert commit b1ef2972 (ACPICA: Permanently set _REV to the value '2'.) as it causes a sound regression to happen on Dell XPS 13 (2015). Reported-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Joe Perches 提交于
These KERN_<LEVEL> uses are unnecessary with pr_<level> and cause bad logging output so remove them. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Fabio Estevam 提交于
'channels' is allocated via kmemdup and it is never freed. Use 'indio_dev->channels' directly instead, so that we avoid such memory leak problem. Reported-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Reviewed-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Naidu Tellapati 提交于
According to hardware team there should be some delay after setting channel number, start mode and before setting START. Add a one microsecond delay for this purpose. Fixes: 1664f6a5 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: NNaidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Naidu Tellapati 提交于
regulator_get_voltage() returns a non-negative value in case of success, and a negative error in case of error. Let's fix this. Fixes: 1664f6a5 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: NNaidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Naidu Tellapati 提交于
At present we are incorrectly setting the register to 0x1 to power up the ADC. Since it is an active high power down register, we need to set the register to 0x0 to actually power up. Conversely, writing 0x1 to the register powers it down. This commit adds a couple of helpers to make the code clearer and then use them to do the power-up/power-down properly. Fixes: 1664f6a5 ("iio: adc: Cosmic Circuits 10001 ADC driver") Signed-off-by: NNaidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: NEzequiel Garcia <ezequiel.garcia@imgtec.com> Cc: <Stable@vger.kernel.org> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Mike Marciniszyn 提交于
Commit d4988623 ("IB/qib: use arch_phys_wc_add()") adjusted mtrr inititialization to use the new interface. Unfortunately, the new interface returns a signed value and the patch tested the unsigned wc_cookie. Fix the issue by changing the type of wc_cookie to int. For the success case the ret left at zero to avoid a warning from the caller. For failure wc_cookie is used as the ret. Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
The string iwpm_ulib_name is recorded in a nlmsg as a netlink attribute. Without this fix parsing of the nlmsg by the userspace port mapper service fails because of unknown attribute length, causing the port mapper service not to register the client, which has sent the nlmsg. Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com> Cc: <stable@vger.kernel.org> #v3.16 Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-