- 13 10月, 2009 6 次提交
-
-
由 Chris Rankin 提交于
The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product IDs as the Belkin F5D5050, so we need to teach the pegasus driver to ignore adaptors belonging to the "Wireless" class 0xE0. For this one case anyway, seeing as pegasus is a driver for "Wired" adaptors. Signed-off-by: NChris Rankin <rankincj@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Use resource_size_t for PCI resource remapping instead of unsigned long. Physical addresses can exceed range of long data type (e.g with PAE). Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
drivers/net/ethoc.c: In function ‘ethoc_open’: drivers/net/ethoc.c:667: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Cox 提交于
drivers/net/wireless/libertas/cmdresp.c: In function ‘lbs_process_event’: drivers/net/wireless/libertas/cmdresp.c:519: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/net/wireless/libertas/cmdresp.c:519: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cmdresp.c:519: error: for each function it appears in.) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Ethernet NIC driver for VMware's vmxnet3 From: Shreyas Bhatewara <sbhatewara@vmware.com> This patch adds driver support for VMware's virtual Ethernet NIC: vmxnet3 Guests running on VMware hypervisors supporting vmxnet3 device will thus have access to improved network functionalities and performance. Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NRonghua Zhang <ronghua@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vincent Sanders 提交于
The IXP 2000 network driver was failing to build as it has its own statistics gathering which was not compatible with the recent network device operations changes. This patch fixes the driver in the obvious way and has been compile tested. I have been unable to get the ixp2000 maintainer to comment or test this fix. Signed-off-by: NVincent Sanders <vince@simtec.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2009 4 次提交
-
-
由 Ben Hutchings 提交于
If ace_load_firmware() fails, ace_init() cleans up but still returns 0, leading to an oops as seen in <http://bugs.debian.org/521383>. It should pass the error code up. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Since commit a98b65a3 (net: annotate struct sock bitfield), we lost 8 bytes in struct sock on 64bit arches because of kmemcheck_bitfield_end(flags) misplacement. Fix this by putting together sk_shutdown, sk_no_check, sk_userlocks, sk_protocol and sk_type in the 'flags' 32bits bitfield Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 jamal 提交于
This probably deserves to go into -stable. Pedit will reject a policy that is large because it uses the wrong structure in the policy validation. This fixes it. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 10月, 2009 1 次提交
-
-
由 David S. Miller 提交于
We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2009 10 次提交
-
-
由 Dave Mitchell 提交于
Some of the EMAC V4 implementations support 16K Tx FIFOs. This patch adds support for this functionality and fixes typos in the Tx FIFO size error messages. Signed-off-by: NDave Mitchell <dmitchell@appliedmicro.com> Acked-by: NProdyut Hazarika <phazarika@appliedmicro.com> Acked-by: NVictor Gallardo <vgallardo@appliedmicro.com> Acked-by: NLoc Ho <lho@appliedmicro.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
This was accidentally omitted from one of the previous patches for firmware event handling. The handler needs to the enable firmware irq mask when it's done processing or it may not get any more events interrupts. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Call set_multi API after reset recovery. This was exposed by tripping tx_timeout. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Add wait for NIC fifo and MGMNT fifo to empty before applying reset. Otherwise broken frames can be processed by management processor and cause it to hang. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
The addresses were being added to the filter properly, but were not being enabled. This adds enable bit to filter write. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Broadcast/multicast should always be routed to the default (zeroeth) rx ring. Broadcast frames are already routed correctly. This fixes routing for multicast frames. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Currently frames are routed based on their type and MAC address. This patch adds the port number on which the frame arrived to the routing. This prevents problems in the case where both interfaces have the same MAC address in a routing configuration. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Fix RX queue table size and change from random to default hash values. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
The error unwinding code in set_netns has a bug that will make it run into a BUG_ON if passed a bad wiphy index, fix by not trying to unlock a wiphy that doesn't exist. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 10月, 2009 15 次提交
-
-
由 Jiri Pirko 提交于
Commit 9ef1d4c7 ("[NETLINK]: Missing initializations in dumped data") introduced a typo in initialization. This patch fixes this. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It's not necessary and it's illegal too. Reported-by: NAlexander Strakh <strakh@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wolfram Sang 提交于
nanodoc was missing an ndo_-prefix. Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Albert Herranz 提交于
The DMA-API debugging facility complains about b43 mapping memory from stack for SDIO-based cards. Indeed, b43 currently allocates the PIO RX/TX header and tail buffers from stack. The solution here is to use heap-allocated buffers instead. Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In Bugzilla No. 14181, a PowerMac G4 crashes on ifdown or module unload because the rfkill polling has not been stopped. For the x86 architectures, the attempt to reach a now unmapped register is not fatal as it is on PPC. (Includes "b43: Fix locking problem when stopping rfkill polling". -- JWL) Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
kfree_skb() should be used to free struct sk_buff pointers. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roel Kluin 提交于
A logical of shifts to the left doesn't make sense. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bjorn Helgaas 提交于
User-visible messages should use formatted MAC addresses ("00:01:...") rather than raw ("0001...") so they match other parts of the system. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> CC: ilw@linux.intel.com CC: linux-wireless@vger.kernel.org Acked-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Fix IRQ mask sanity check for physically pulled device. Tested-by: NAndrew Price <andy@andrewprice.me.uk> Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
The return type of abs() was recently changed from int to long. With min()'s type checking we thus need to make sure that values of the same type are compared. This fixes: CC [M] drivers/net/wireless/iwlwifi/iwl-5000.o drivers/net/wireless/iwlwifi/iwl-5000.c: In function ‘iwl5000_gain_computation’: drivers/net/wireless/iwlwifi/iwl-5000.c:320: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Reported-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
Fixes following on big endian systems: CC [M] drivers/net/wireless/iwlwifi/iwl-rx.o drivers/net/wireless/iwlwifi/iwl-rx.c: In function ‘iwl_rx_reply_rx’: drivers/net/wireless/iwlwifi/iwl-rx.c:1029: warning: integer overflow in expression Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Reported-by: NMarcel Holtmann <marcel@holtmann.org> Tested-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
Set the correct EEPROM offset for enhance tx power for 6000 series Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jay Sternberg 提交于
The address stored in the next link address is a word address but when reading the OTP blocks, a byte address is used. Also if the blocks are full and the last link pointer is not zero, then none of the blocks are valid so return an error. The algorithm is simply valid blocks have a next address and that address's contents is zero. Using the wrong address for the next link address gets arbitrary data, obviously. In cases seen, the first block is considered valid when it is not. If the block has in fact been invalidated there may be old data or there may be no data, bad data, or partial data, there is no way of telling. Without this patch it is possible that a device with valid OTP data is unable to work. Signed-off-by: NJay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When receiving data frames, we can send them only to the interface they belong to based on transmitting station (this doesn't work for probe requests). Also, don't try to handle other frames for AP_VLAN at all since those interface should only receive data. Additionally, the transmit side must check that the station we're sending a frame to is actually on the interface we're transmitting on, and not transmit packets to functions that live on other interfaces, so validate that as well. Another bug fix is needed in sta_info.c where in the VLAN case when adding/removing stations we overwrite the sdata variable we still need. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Don't use struct wldev after detach. This fixes an oops on access. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 10月, 2009 4 次提交
-
-
由 Thomas Chou 提交于
Only 128 buffer descriptors are supported in the core. Limit the number in case we have more memory. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Chou 提交于
This patch enabled the ethoc to allocate system memory as buffer when there is no dedicated buffer memory. Some hardware designs may not have dedicated buffer memory such as on chip or off chip SRAM. In this case, only one memory resource is supplied in the platform data instead of two. Then a DMA buffer can be allocated from system memory and used for the transfer. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Chou 提交于
The packet buffer is allocated at 4 bytes boundary, but the IP header length and version bits is located at byte 14. These bit fields access as 32 bits word and caused exception on processors that do not support unaligned access. The patch adds 2 bytes offset to make the bit fields word aligned. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Chou 提交于
The pointer address in buffer descriptors is physical address. The pointer that processor used to access packet is virtual address. Though the higher bits of pointer address used by the MAC may be truncated to zero in special case, it is not always true in larger designs. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-