VI has asic specific virt support, which including mailbox and
golden registers init.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: Nshaoyunl <Shaoyun.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add high level interfaces that is not relate to specific asic. So
asic files just need to implement the interfaces to support
virtualization.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtualization, it is must for driver to use KIQ to access
registers when it is out of GPU full access mode.

v2: agd: rebase
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add new flag to define gpu runtime that is out of full gpu access.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Implement emit_rreg/wreg function for kiq ring.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

During virtual runtime, need to send command to kiq ring to
read/write GPU registers. Add two interface to support the two
actions.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NMonk Linu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure the CSA is mapped.

v2: agd: rebase.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

for SRIOV usage, CSA is only used per device and each
VM will map on it.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

and implement CSA functions in this file
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip amdgpu_gem_va_update_vm otherwise. Also clean up the check for the
non-shadow page tables using the new helper function.

This fixes a crash with the stack trace:

amdgpu_gem_va_update_vm
-> amdgpu_vm_update_page_directory
 -> amdgpu_ttm_bind
  -> amdgpu_gtt_mgr_alloc

v2: actually check bo->shadow instead of just checking bo twice
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip amdgpu_gem_va_update_vm when shadow the page directory is swapped out.
Clean up the check for non-shadow BOs as well using the new helper function.

This fixes a crash with the stack trace:

amdgpu_gem_va_update_vm
-> amdgpu_vm_update_page_directory
 -> amdgpu_ttm_bind
  -> amdgpu_gtt_mgr_alloc
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This catches evictions of shadow page tables from the GART. Since shadow
page tables are always stored in system memory, amdgpu_bo_move is never
called for them.

This fixes a crash during command submission that occurs when only a shadow
page table and no other BOs were evicted since the last submission.

Fixes: 1baa439f ("drm/amdgpu: allocate shadow for pd/pt bo V2")
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ensure that the driver can listen to evictions even when they don't take the
path through ttm_bo_driver::move.

This is crucial for amdgpu, which relies on an eviction counter to skip
re-binding page tables when possible.
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. disable vce cg when vce hw initialize.
2. initizlize vce clock to 10KHz fo dgpu,
   so no need to set bypass clock to vce.

Change-Id: I934c2c4820cc95c1bfa2fa41ff0f40a0d3cd1c40
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in profiling mode, powerplay will fix power state
as stable as possible.and disable gfx cg and LBPW feature.

profile_standard: as a prerequisite, ensure power and thermal
sustainable, set clocks ratio as close to the highest clock
ratio as possible.
profile_min_sclk: fix mclk as profile_normal, set lowest sclk
profile_min_mclk: fix sclk as profile_normal, set lowest mclk
profile_peak: set highest sclk and mclk, power and thermal not
sustainable
profile_exit: exit profile mode. enable gfx cg/lbpw feature.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Updating SQ DIDT settings and block mask
so SQ uses PCC on Polaris11.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

following firmware's request.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: William Lewis <minutemaidpark@hotmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Call detection function driectly, so remove the interface.

V2: ci and si also need to call the detect function.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move the detection forward into vi_set_ip_blocks function, then
add ip blocks virtualization need if device is VF.

V2: add ip blocks according to asic type.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use acronym to rename fields to make easy to spell out.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

KIQ is queue-memory based initialization method: setup KIQ queue
firstly, then send command to KIQ to setup other queues, without
accessing registers.

For virtualization, need KIQ to access virtual function registers
when running on guest mode.

V2: use amdgpu_bo_create/free_kernel to allocate BO.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PCI I/O bar can be disabled in VBIOS to save the resource. It is often
disabled in large aperture VBIOS. Don't call it an error.
Signed-off-by: NAmber Lin <Amber.Lin@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. delete asic_smum_init functions, export asic private functions
   to smumgr directly, make code more readable.
2. create asic private data in asic_init_func.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add pp_smu7_thermal_fini function to free related
data when smu7_hwmgr_fini.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

struct smumgr/hwmgr will be freed on amd_powerplay_destory

and if we free them in one of asic private functions, other private
date may not be freed. for example: power state and power table
in hwmgr.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: add pp_check function to check pp_instance
   valid.

1. powerplay export two new interface to amdgpu,
   amd_powerplay_create/amd_powerplay_destroy.
2. create pp_instance/smumgr/hwmgr/eventmgr in
   early init, destroy them when lata_fini.
3. in sw_init, create and init asic private smumgr
   data, and free them when sw_fini.
4. in hw_init, create and init asic private hwmgr
   data, and free them when hw_fini.
5. export powerplay state: PP_DPM_DISABLED.
   when user disabled powerplay or hwmgr/eventmgr
   init failed, powerplay return this state to amdgpu.
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>