- 08 7月, 2008 40 次提交
-
-
由 Yinghai Lu 提交于
v2: fix print info to cont Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Ingo Molnar wrote: > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > I don't know if this will fix this bug, but it's definitely a bugfix. It was trashing random pages by overwriting them with pagetables... Don't trash a large pmd's data when mapping physical memory. This is a bugfix for "x86_64: adjust mapping of physical pagetables to work with Xen". Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Ingo Molnar wrote: > * Jeremy Fitzhardinge <jeremy@goop.org> wrote: > > >>> It quickly broke the build in testing: > >>> include/asm/pgalloc.h: In function ‘paravirt_pgd_free': > >>> include/asm/pgalloc.h:14: error: parameter name omitted > >>> arch/x86/kernel/entry_64.S: In file included from > >>> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function > >>> ‘paravirt_pgd_free': > >>> include/asm/pgalloc.h:14: error: parameter name omitted >>> >> No, looks like my fault. The non-PARAVIRT version of >> paravirt_pgd_free() is: >> >> static inline void paravirt_pgd_free(struct mm_struct *mm, pgd_t *) {} >> >> but C doesn't like missing parameter names, even if unused. >> >> This should fix it: >> > > that fixed the build but now we've got a boot crash with this config: > > time.c: Detected 2010.304 MHz processor. > spurious 8259A interrupt: IRQ7. > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<0000000000000000>] > PGD 0 > Thread overran stack, or stack corrupted > Oops: 0010 [1] SMP > CPU 0 > > with: > > http://redhat.com/~mingo/misc/config-Thu_Jun_26_12_46_46_CEST_2008.bad > Use SWAPGS_UNSAFE_STACK in ia32entry.S in the places where the active stack is the usermode stack. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
do that in init_memory_mapping also remove one init_ohci1394_dma_on_all_controllers Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
asm-x86/paravirt.h already have protection with CONFIG_PARAVIRT inside Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Bernhard Walle 提交于
This patch brings back limiting of the E820 map when a user-defined E820 map is specified. While the behaviour of i386 (32 bit) was to limit the E820 map (and /proc/iomem), the behaviour of x86-64 (64 bit) was not to limit. That patch limits the E820 map again for both x86 architectures. Code was tested for compilation and booting on a 32 bit and 64 bit system. Signed-off-by: NBernhard Walle <bwalle@suse.de> Acked-by: NYinghai Lu <yhlu.kernel@gmail.com> Cc: kexec@lists.infradead.org Cc: vgoyal@redhat.com Cc: Bernhard Walle <bwalle@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
The patch "x86: introduce init_memory_mapping for 32bit" does not allocate enough space for PTEs if the CPU does not implement PSE. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
64-bit Xen pushes a couple of extra words onto an exception frame. Add a hook to deal with them. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
It's never safe to call a swapgs pvop when the user stack is current - it must be inline replaced. Rather than making a call, the SWAPGS_UNSAFE_STACK pvop always just puts "swapgs" as a placeholder, which must either be replaced inline or trap'n'emulated (somehow). Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Replace privileged instructions with the corresponding pvops in ia32entry.S. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
In a 64-bit system, we need separate sysret/sysexit operations to return to a 32-bit userspace. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
There's no need to combine restoring the user rsp within the sysret pvop, so split it out. This makes the pvop's semantics closer to the machine instruction. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Don't conflate sysret and sysexit; they're different instructions with different semantics, and may be in use at the same time (at least within the same kernel, depending on whether its an Intel or AMD system). sysexit - just return to userspace, does no register restoration of any kind; must explicitly atomically enable interrupts. sysret - reloads flags from r11, so no need to explicitly enable interrupts on 64-bit, responsible for restoring usermode %gs Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
This is needed when the kernel is running on RING3, such as under Xen. x86_64 has a weird feature that makes it #GP on iret when SS is a null descriptor. This need to be tested on bare metal to make sure it doesn't cause any problems. AMD specs say SS is always ignored (except on iret?). Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
We must do this because load_TLS() may need to clear %fs and %gs. (e.g. under Xen). Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
We must leave lazy mode before switching the %fs and %gs selectors. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eduardo Habkost 提交于
We will need to set a pte on l3_user_pgt. Extract set_pte_vaddr_pud() from set_pte_vaddr(), that will accept the l3 page table as parameter. This change should be a no-op for existing code. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Because Xen doesn't support PSE mappings in guests, all code which assumed the presence of PSE has been changed to fall back to smaller mappings if necessary. As a result, PSE is optional rather than required (though still used whereever possible). Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
If PSE is not available, then fall back to 4k page mappings for the vmemmap area. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
This makes a few of changes to the construction of the initial pagetables to work better with paravirt_ops/Xen. The main areas are: 1. Support non-PSE mapping of memory, since Xen doesn't currently allow 2M pages to be mapped in guests. 2. Make sure that the ioremap alias of all pages are dropped before attaching the new page to the pagetable. This avoids having writable aliases of pagetable pages. 3. Preserve existing pagetable entries, rather than overwriting. Its possible that a fair amount of pagetable has already been constructed, so reuse what's already in place rather than ignoring and overwriting it. The algorithm relies on the invariant that any page which is part of the kernel pagetable is itself mapped in the linear memory area. This way, it can avoid using ioremap on a pagetable page. The invariant holds because it maps memory from low to high addresses, and also allocates memory from low to high. Each allocated page can map at least 2M of address space, so the mapped area will always progress much faster than the allocated area. It relies on the early boot code mapping enough pages to get started. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Split x86_64_start_kernel() into two pieces: The first essentially cleans up after head_64.S. It clears the bss, zaps low identity mappings, sets up some early exception handlers. The second part preserves the boot data, reserves the kernel's text/data/bss, pagetables and ramdisk, and then starts the kernel proper. This split is so that Xen can call the second part to do the set up it needs done. It doesn't need any of the first part setups, because it doesn't boot via head_64.S, and its redundant or actively damaging. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
This matches 32 bit. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eduardo Habkost 提交于
Set __PAGE_OFFSET to the most negative possible address + 16*PGDIR_SIZE. The gap is to allow a space for a hypervisor to fit. The gap is more or less arbitrary, but it's what Xen needs. When booting native, kernel/head_64.S has a set of compile-time generated pagetables used at boot time. This patch removes their absolutely hard-coded layout, and makes it parameterised on __PAGE_OFFSET (and __START_KERNEL_map). Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
On 32-bit it's best to use a %cs: prefix to access memory where the other segments may not bet set up properly yet. On 64-bit it's best to use a rip-relative addressing mode. Define PARA_INDIRECT() to abstract this and generate the proper addressing mode in each case. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Rather than just jumping to 0 when there's a missing operation, raise a BUG. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Jan Beulich points out that vmalloc_sync_all() assumes that the kernel's pmd is always expected to be present in the pgd. The current pgd construction code will add the pgd to the pgd_list before its pmds have been pre-populated, thereby making it visible to vmalloc_sync_all(). However, because pgd_prepopulate_pmd also does the allocation, it may block and cannot be done under spinlock. The solution is to preallocate the pmds out of the spinlock, then populate them while holding the pgd_list lock. This patch also pulls the pmd preallocation and mop-up functions out to be common, assuming that the compiler will generate no code for them when PREALLOCTED_PMDS is 0. Also, there's no need for pgd_ctor to clear the pgd again, since it's allocated as a zeroed page. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Add hooks which are called at pgd_alloc/free time. The pgd_alloc hook may return an error code, which if non-zero, causes the pgd allocation to be failed. The hooks may be used to allocate/free auxillary per-pgd information. also fix: > * Ingo Molnar <mingo@elte.hu> wrote: > > include/asm/pgalloc.h: In function ‘paravirt_pgd_free': > include/asm/pgalloc.h:14: error: parameter name omitted > arch/x86/kernel/entry_64.S: In file included from > arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function ‘paravirt_pgd_free': > include/asm/pgalloc.h:14: error: parameter name omitted Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
vmalloc_sync_all() is only called from register_die_notifier and alloc_vm_area. Neither is on any performance-critical paths, so vmalloc_sync_all() itself is not on any hot paths. Given that the optimisations in vmalloc_sync_all add a fair amount of code and complexity, and are fairly hard to evaluate for correctness, it's better to just remove them to simplify the code rather than worry about its absolute performance. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Add sync_cmpxchg to match 32-bit's sync_cmpxchg. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jeremy Fitzhardinge 提交于
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: xen-devel <xen-devel@lists.xensource.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
fix: In file included from arch/x86/kernel/setup.c:118: include/asm/highmem.h:64: error: expected identifier or ‘(' before ‘do' include/asm/highmem.h:64: error: expected identifier or ‘(' before ‘while' include/asm/highmem.h:67: error: expected identifier or ‘(' before ‘do' include/asm/highmem.h:67: error: expected identifier or ‘(' before ‘while' Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yinghai Lu 提交于
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-