CHV uses the gen8 shadow register mechanism so we shouldn't be
checking the GT FIFO status.

This effectively removes the posting read, so add an explicit
posting read using FORCEWAKE_ACK_VLV (which is what use in
vlv_forcewake_reset()).
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Skip __gen6_gt_wait_for_thread_c0() on CHV.
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Disable media turbo and Add DOWN_IDLE_AVG support (Ville)

v3: Mass rename of the dev_priv->rps variables in upstream.

v4: Rebase against latest code. (Deepak)

v5: Rebase against latest nightly code. (Deepak)

v6: Rename the variables to match the spec (Mika)

v7: change min/max freq variable naming to match spec (Mika)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because of the upcoming vblank interrupt driven watermark update
mechanism we will have use for vblank interrupts during plane
enabling/disabling. So don't call drm_vblank_off() until planes
are off, and call drm_vblank_on() just before we start to enable
the planes.

v2: Pimp commit message (Paulo)
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Support to individually control Media/Render well based on the register access.
Add CHV specific write function to habdle difference between registers
that are sadowed vs those that need forcewake even for writes.

Streamline the CHV forcewake functions just like was done for VLV.

This will also fix a bug in accessing the common well registers,
where we'd end up trying to wake up the wells too many times
since we'd call force_wake_get/put twice per register access, with
FORCEFAKE_ALL both times.

v2: Drop write FIFO for CHV and add comman well forcewake (Ville)
    Re-factor CHV/VLV Forcewake offsets (Ben)

v3: Fix for decrementing fw count in chv read/write. (Deepak)

v4: Squash the patches (Mika)
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
[vsyrjala: Move the register range macros into intel_uncore.c]
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Configure PCBR if BIOS fails allocate pcbr (deepak)

v3: Fix PCBR condition check during CHV RC6 Enable flag set

v4: Fixup PCBR comment msg. (Chris)
    Rebase against latest code (Deak)
    Fixup Spurious hunk (Ben)

v5: Fix PCBR and commentis msg (mika)

v6: Rebase patch on latest nightly (Deepak)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

"Because our driver assumes only one panel is PSR capable, and we
already have other PSR information on dev_priv instead of intel_dp. If
we ever support multiple PSR panels, we'll have to move struct
i915_psr to intel_dp anyway." (by Paulo)

v2: Avoid more than one setup. Removing initialization
    and trusting allocation. (By Paulo Zanoni).
v3: rebase.
v4: Adding comment.
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next

display rework fixes lots of displayport issues.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (43 commits)
  drm/nouveau/disp/dp: fix tmds passthrough on dp connector
  drm/nouveau/dp: probe dpcd to determine connectedness
  drm/nv50-: trigger update after all connectors disabled
  drm/nv50-: prepare for attaching a SOR to multiple heads
  drm/gf119-/disp: fix debug output on update failure
  drm/nouveau/disp/dp: make use of postcursor when its available
  drm/g94-/disp/dp: take max pullup value across all lanes
  drm/nouveau/bios/dp: parse lane postcursor data
  drm/nouveau/dp: fix support for dpms
  drm/nouveau: register a drm_dp_aux channel for each dp connector
  drm/g94-/disp: add method to power-off dp lanes
  drm/nouveau/disp/dp: maintain link in response to hpd signal
  drm/g94-/disp: bash and wait for something after changing lane power regs
  drm/nouveau/disp/dp: split link config/power into two steps
  drm/nv50/disp: train PIOR-attached DP from second supervisor
  drm/nouveau/disp/dp: make use of existing output data for link training
  drm/gf119/disp: start removing direct vbios parsing from supervisor
  drm/nv50/disp: start removing direct vbios parsing from supervisor
  drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
  drm/nouveau/disp/dp: create subclass for dp outputs
  ...

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We were sending the necessary state changes to unset the mode, but
never actually hit the big GO button unless another modeset happens
afterwards.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

And at the same time, obey the spec better wrt out-of-range requests.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

SOR_PWR has no effect to power-off DP links, unlike other SOR protocols.

Instead, on the source side, we cut power to the lanes after having put
the sink into D3.  Link training takes care of everything required to
bring it back again.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This previously worked for the most part due to userspace doing a
modeset in response to HPD interrupts.  This will allow us to
properly handle cases where sync is lost for other reasons, or if
userspace isn't caring.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Some kind of update?  Needed to make the power-down take effect at least.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We want to be able to power down the lanes for DPMS off.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Same place as for SOR, between detach and attach phases.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will, at some point, be used to replace various bits and pieces of
code doing direct bios parsing.  For now, it'll just be used for some
DP improvements.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There's also provisions to allow a pad to be locked with a specific
routing, for an indefinite period of time.  This will be used in
future patches.

The G94+ pad driver will now also power-down pads when not required.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This was a half-finished hack before, just enough to handle the shared
aux/i2c pad thing on G94 and up.

We got lucky with locking etc up until now, as this was (generally) all
protected by the DRM mode_config lock.  It's about to become a lot more
likely to hit the races.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>