- 08 9月, 2015 2 次提交
-
-
由 Juergen Gross 提交于
Commit b1c9f169047b ("xen: split counting of extra memory pages...") introduced an error when dom0 was started with limited memory occurring only on some hardware. The problem arises in case dom0 is started with initial memory and maximum memory being the same. The kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. If all of this is true and the E820 map of the machine is sparse (some areas are not covered) then the machine might crash early in the boot process. An example E820 map triggering the problem looks like this: [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf7fafff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf7fb000-0x00000000cf95ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf960000-0x00000000cfb62fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfb63000-0x00000000cfd14fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfd15000-0x00000000cfd61fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfd62000-0x00000000cfd6cfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000cfd6d000-0x00000000cfd6ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfd70000-0x00000000cfd70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cfd71000-0x00000000cfea8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfea9000-0x00000000cfeb9fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfeba000-0x00000000cfecafff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfecb000-0x00000000cfecbfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfecc000-0x00000000cfedbfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfedc000-0x00000000cfedcfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfedd000-0x00000000cfeddfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfede000-0x00000000cfee3fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cfee4000-0x00000000cfef6fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cfef7000-0x00000000cfefffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000020effffff] usable In this case the area a0000-dffff isn't present in the map. This will confuse the memory setup of the domain when remapping the memory from such holes to populated areas. To avoid the problem the accounting of to be remapped memory has to count such holes in the E820 map as well. Reported-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Commit b1c9f169047b ("xen: split counting of extra memory pages...") introduced an error when dom0 was started with limited memory. The problem arises in case dom0 is started with initial memory and maximum memory being the same and exactly a multiple of 1 GB. The kernel must be configured without CONFIG_XEN_BALLOON_MEMORY_HOTPLUG for the problem to happen. In this case it will crash very early during boot due to the virtual mapped p2m list not being large enough to be able to remap any memory: (XEN) Freed 304kB init memory. mapping kernel into physical memory about to get started... (XEN) traps.c:459:d0v0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] (XEN) domain_crash_sync called from entry.S: fault at ffff82d080229a93 create_bounce_frame+0x12b/0x13a (XEN) Domain 0 (vcpu#0) crashed on cpu#0: (XEN) ----[ Xen-4.5.2-pre x86_64 debug=n Not tainted ]---- (XEN) CPU: 0 (XEN) RIP: e033:[<ffffffff81d120cb>] (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest (d0v0) (XEN) rax: ffffffff81db2000 rbx: 000000004d000000 rcx: 0000000000000000 (XEN) rdx: 000000004d000000 rsi: 0000000000063000 rdi: 000000004d063000 (XEN) rbp: ffffffff81c03d78 rsp: ffffffff81c03d28 r8: 0000000000023000 (XEN) r9: 00000001040ff000 r10: 0000000000007ff0 r11: 0000000000000000 (XEN) r12: 0000000000063000 r13: 000000000004d000 r14: 0000000000000063 (XEN) r15: 0000000000000063 cr0: 0000000080050033 cr4: 00000000000006f0 (XEN) cr3: 0000000105c0f000 cr2: ffffc90000268000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 (XEN) Guest stack trace from rsp=ffffffff81c03d28: (XEN) 0000000000000000 0000000000000000 ffffffff81d120cb 000000010000e030 (XEN) 0000000000010006 ffffffff81c03d68 000000000000e02b ffffffffffffffff (XEN) 0000000000000063 000000000004d063 ffffffff81c03de8 ffffffff81d130a7 (XEN) ffffffff81c03de8 000000000004d000 00000001040ff000 0000000000105db1 (XEN) 00000001040ff001 000000000004d062 ffff8800092d6ff8 0000000002027000 (XEN) ffff8800094d8340 ffff8800092d6ff8 00003ffffffff000 ffff8800092d7ff8 (XEN) ffffffff81c03e48 ffffffff81d13c43 ffff8800094d8000 ffff8800094d9000 (XEN) 0000000000000000 ffff8800092d6000 00000000092d6000 000000004cfbf000 (XEN) 00000000092d6000 00000000052d5442 0000000000000000 0000000000000000 (XEN) ffffffff81c03ed8 ffffffff81d185c1 0000000000000000 0000000000000000 (XEN) ffffffff81c03e78 ffffffff810f8ca4 ffffffff81c03ed8 ffffffff8171a15d (XEN) 0000000000000010 ffffffff81c03ee8 0000000000000000 0000000000000000 (XEN) ffffffff81f0e402 ffffffffffffffff ffffffff81dae900 0000000000000000 (XEN) 0000000000000000 0000000000000000 ffffffff81c03f28 ffffffff81d0cf0f (XEN) 0000000000000000 0000000000000000 0000000000000000 ffffffff81db82e0 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) ffffffff81c03f38 ffffffff81d0c603 ffffffff81c03ff8 ffffffff81d11c86 (XEN) 0300000100000032 0000000000000005 0000000000000020 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) 0000000000000000 0000000000000000 0000000000000000 0000000000000000 (XEN) Domain 0 crashed: rebooting machine in 5 seconds. This can be avoided by allocating aneough space for the p2m to cover the maximum memory of dom0 plus the identity mapped holes required for PCI space, BIOS etc. Reported-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
- 20 8月, 2015 29 次提交
-
-
由 Julien Grall 提交于
ARM guests are always HVM. The current implementation is assuming a 1:1 mapping which is only true for DOM0 and may not be at all in the future. Furthermore, all the helpers but arbitrary_virt_to_machine are used in x86 specific code (or only compiled for). The helper arbitrary_virt_to_machine is only used in PV specific code. Therefore we should never call the function. Add a BUG() in this helper and drop all the others. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
Since VPMU code emulates RDPMC instruction with RDMSR and because hypervisor does not emulate it there is no reason to try setting CR4's PCE bit (and the hypervisor will warn on seeing it set). Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
Add PMU emulation code that runs when we are processing a PMU interrupt. This code will allow us not to trap to hypervisor on each MSR/LVTPC access (of which there may be quite a few in the handler). Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
Provide interfaces for recognizing accesses to PMU-related MSRs and LVTPC APIC and process these accesses in Xen PMU code. (The interrupt handler performs XENPMU_flush right away in the beginning since no PMU emulation is available. It will be added with a later patch). Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
AMD and Intel PMU register initialization and helpers that determine whether a register belongs to PMU. This and some of subsequent PMU emulation code is somewhat similar to Xen's PMU implementation. Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
Map shared data structure that will hold CPU registers, VPMU context, V/PCPU IDs of the CPU interrupted by PMU interrupt. Hypervisor fills this information in its handler and passes it to the guest for further processing. Set up PMU VIRQ. Now that perf infrastructure will assume that PMU is available on a PV guest we need to be careful and make sure that accesses via RDPMC instruction don't cause fatal traps by the hypervisor. Provide a nop RDPMC handler. For the same reason avoid issuing a warning on a write to APIC's LVTPC. Both of these will be made functional in later patches. Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
Set Xen's PMU mode via /sys/hypervisor/pmu/pmu_mode. Add XENPMU hypercall. Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Boris Ostrovsky 提交于
Export Xen symbols to dom0 via /proc/xen/xensyms (similar to /proc/kallsyms). Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Cleanup by removing arch/x86/xen/p2m.h as it isn't needed any more. Most definitions in this file are used in p2m.c only. Move those into p2m.c. set_phys_range_identity() is already declared in arch/x86/include/asm/xen/page.h, add __init annotation there. MAX_REMAP_RANGES isn't used at all, just delete it. The only define left is P2M_PER_PAGE which is moved to page.h as well. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
64 bit pv-domains under Xen are limited to 512 GB of RAM today. The main reason has been the 3 level p2m tree, which was replaced by the virtual mapped linear p2m list. Parallel to the p2m list which is being used by the kernel itself there is a 3 level mfn tree for usage by the Xen tools and eventually for crash dump analysis. For this tree the linear p2m list can serve as a replacement, too. As the kernel can't know whether the tools are capable of dealing with the p2m list instead of the mfn tree, the limit of 512 GB can't be dropped in all cases. This patch replaces the hard limit by a kernel parameter which tells the kernel to obey the 512 GB limit or not. The default is selected by a configuration parameter which specifies whether the 512 GB limit should be active per default for domUs (domain save/restore/migration and crash dump analysis are affected). Memory above the domain limit is returned to the hypervisor instead of being identity mapped, which was wrong anyway. The kernel configuration parameter to specify the maximum size of a domain can be deleted, as it is not relevant any more. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Check whether the hypervisor supplied p2m list is placed at a location which is conflicting with the target E820 map. If this is the case relocate it to a new area unused up to now and compliant to the E820 map. As the p2m list might by huge (up to several GB) and is required to be mapped virtually, set up a temporary mapping for the copied list. For pvh domains just delete the p2m related information from start info instead of reserving the p2m memory, as we don't need it at all. For 32 bit kernels adjust the memblock_reserve() parameters in order to cover the page tables only. This requires to memblock_reserve() the start_info page on it's own. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Some special pages containing interfaces to xen are being reserved implicitly only today. The memblock_reserve() call to reserve them is meant to reserve the p2m list supplied by xen. It is just reserving not only the p2m list itself, but some more pages up to the start of the xen built page tables. To be able to move the p2m list to another pfn range, which is needed for support of huge RAM, this memblock_reserve() must be split up to cover all affected reserved pages explicitly. The affected pages are: - start_info page - xenstore ring (might be missing, mfn is 0 in this case) - console ring (not for initial domain) Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
During early boot as Xen pv domain the kernel needs to map some page tables supplied by the hypervisor read only. This is needed to be able to relocate some data structures conflicting with the physical memory map especially on systems with huge RAM (above 512GB). Provide the function early_memremap_ro() to provide this read only mapping. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Check whether the initrd is placed at a location which is conflicting with the target E820 map. If this is the case relocate it to a new area unused up to now and compliant to the E820 map. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Check whether the page tables built by the domain builder are at memory addresses which are in conflict with the target memory map. If this is the case just panic instead of running into problems later. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Checks whether the pre-allocated memory of the loaded kernel is in conflict with the target memory map. If this is the case, just panic instead of run into problems later, as there is nothing we can do to repair this situation. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
For being able to relocate pre-allocated data areas like initrd or p2m list it is mandatory to find a contiguous memory area which is not yet in use and doesn't conflict with the memory map we want to be in effect. In case such an area is found reserve it at once as this will be required to be done in any case. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Provide a service routine to check a physical memory area against the E820 map. The routine will return false if the complete area is RAM according to the E820 map and true otherwise. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Memory pages in the initial memory setup done by the Xen hypervisor conflicting with the target E820 map are remapped. In order to do this those pages are counted and remapped in xen_set_identity_and_remap(). Split the counting from the remapping operation to be able to setup the needed memory sizes in time but doing the remap operation at a later time. This enables us to simplify the interface to xen_set_identity_and_remap() as the number of remapped and released pages is no longer needed here. Finally move the remapping further down to prepare relocating conflicting memory contents before the memory might be clobbered by xen_set_identity_and_remap(). This requires to not destroy the Xen E820 map when the one for the system is being constructed. Signed-off-by: NJuergen Gross <jgross@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Instead of using a function local static e820 map in xen_memory_setup() and calling various functions in the same source with the map as a parameter use a map directly accessible by all functions in the source. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Direct Xen to place the initial P->M table outside of the initial mapping, as otherwise the 1G (implementation) / 2G (theoretical) restriction on the size of the initial mapping limits the amount of memory a domain can be handed initially. As the initial P->M table is copied rather early during boot to domain private memory and it's initial virtual mapping is dropped, the easiest way to avoid virtual address conflicts with other addresses in the kernel is to use a user address area for the virtual address of the initial P->M table. This allows us to just throw away the page tables of the initial mapping after the copy without having to care about address invalidation. It should be noted that this patch won't enable a pv-domain to USE more than 512 GB of RAM. It just enables it to be started with a P->M table covering more memory. This is especially important for being able to boot a Dom0 on a system with more than 512 GB memory. Signed-off-by: NJuergen Gross <jgross@suse.com> Based-on-patch-by: NJan Beulich <jbeulich@suse.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
In case the Xen tools indicate they don't need the p2m 3 level tree as they support the virtual mapped linear p2m list, just omit building the tree. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
The virtual address of the linear p2m list should be stored in the shared info structure read by the Xen tools to be able to support 64 bit pv-domains larger than 512 GB. Additionally the linear p2m list interface includes a generation count which is changed prior to and after each mapping change of the p2m list. Reading the generation count the Xen tools can detect changes of the mappings and re-read the p2m list eventually. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Juergen Gross 提交于
Use the newest headers from the xen tree to get some new structure layouts. Signed-off-by: NJuergen Gross <jgross@suse.com> Reviewed-by: NDavid Vrabel <david.vrabel@citrix.com> Acked-by: NKonrad Rzeszutek Wilk <Konrad.wilk@oracle.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Julien Grall 提交于
The commit 6f6c15ef "xen/pvhvm: Remove the xen_platform_pci int." makes the x86 version of xen_pci_platform_unplug static. Therefore we don't need anymore to define a dummy xen_pci_platform_unplug for ARM. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
由 Julien Grall 提交于
Currently, the event channel rebind code is gated with the presence of the vector callback. The virtual interrupt controller on ARM has the concept of per-CPU interrupt (PPI) which allow us to support per-VCPU event channel. Therefore there is no need of vector callback for ARM. Xen is already using a free PPI to notify the guest VCPU of an event. Furthermore, the xen code initialization in Linux (see arch/arm/xen/enlighten.c) is requesting correctly a per-CPU IRQ. Introduce new helper xen_support_evtchn_rebind to allow architecture decide whether rebind an event is support or not. It will always return true on ARM and keep the same behavior on x86. This is also allow us to drop the usage of xen_have_vector_callback entirely in the ARM code. Signed-off-by: NJulien Grall <julien.grall@citrix.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Bob Liu 提交于
Note: This patch is based on original work of Arianna's internship for GNOME's Outreach Program for Women. Only one hardware queue is used now, so there is no significant performance change The legacy non-mq code is deleted completely which is the same as other drivers like virtio, mtip, and nvme. Also dropped one unnecessary holding of info->io_lock when calling blk_mq_stop_hw_queues(). Signed-off-by: NArianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: NBob Liu <bob.liu@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Acked-by: NJens Axboe <axboe@fb.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Konstantin Khlebnikov 提交于
This code is used only when CONFIG_PREEMPT=n and only in non-atomic context: xen_in_preemptible_hcall is set only in privcmd_ioctl_hypercall(). Thus preempt_count is zero and should_resched() is equal to need_resched(). Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
由 Colin Ian King 提交于
xen_has_pv_devices() has no parameters, so use the normal void parameter convention to make it match the prototype in the header file include/xen/platform_pci.h. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
-
- 17 8月, 2015 7 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A smallish batch of fixes, a little more than expected this late, but all fixes are contained to their platforms and seem reasonably low risk: - a somewhat large SMP fix for ux500 that still seemed warranted to include here - OMAP DT fixes for pbias regulator specification that broke due to some DT reshuffling - PCIe IRQ routing bugfix for i.MX - networking fixes for keystone - runtime PM for OMAP GPMC - a couple of error path bug fixes for exynos" * tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file ARM: dts: keystone: fix the clock node for mdio memory: omap-gpmc: Don't try to save uninitialized GPMC context ARM: imx6: correct i.MX6 PCIe interrupt routing ARM: ux500: add an SMP enablement type and move cpu nodes ARM: dts: dra7: Fix broken pbias device creation ARM: dts: OMAP5: Fix broken pbias device creation ARM: dts: OMAP4: Fix broken pbias device creation ARM: dts: omap243x: Fix broken pbias device creation ARM: EXYNOS: fix double of_node_put() on error path ARM: EXYNOS: Fix potentian kfree() of ro memory
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS bugfix from Ralf Baechle: "Only a single MIPS fix - the math when invoking syscall_trace_enter was wrong" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix seccomp syscall argument for MIPS64
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Merge x86 fixes from Ingo Molnar: "Two followup fixes related to the previous LDT fix" Also applied a further FPU emulation fix from Andy Lutomirski to the branch before actually merging it. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip x86/ldt: Further fix FPU emulation x86/ldt: Correct FPU emulation access to LDT x86/ldt: Correct LDT access in single stepping logic
-
由 Andy Lutomirski 提交于
The previous fix confused a selector with a segment prefix. Fix it. Compile-tested only. Cc: stable@vger.kernel.org Cc: Juergen Gross <jgross@suse.com> Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Fixes: 4809146b ("x86/ldt: Correct FPU emulation access to LDT") Signed-off-by: NAndy Lutomirski <luto@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jann Horn 提交于
fuse_dev_ioctl() performed fuse_get_dev() on a user-supplied fd, leading to a type confusion issue. Fix it by checking file->f_op. Signed-off-by: NJann Horn <jann@thejh.net> Acked-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Olof Johansson 提交于
Merge tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes ARM: Couple of Keysyone MDIO DTS fixes for 4.2-rc6+ These are necessary to get the NIC card working on all Keystone EVMs. Couple of boards are broken without these two fixes. * tag 'keystone-dts-late-fixes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file ARM: dts: keystone: fix the clock node for mdio Signed-off-by: NOlof Johansson <olof@lixom.net>
-
- 16 8月, 2015 2 次提交
-
-
由 Markos Chandras 提交于
Commit 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)") fixed indirect system calls on O32 but it also introduced a bug for MIPS64 where it erroneously modified the v0 (syscall) register with the assumption that the sycall offset hasn't been taken into consideration. This breaks seccomp on MIPS64 n64 and n32 ABIs. We fix this by replacing the addition with a move instruction. Fixes: 4c21b8fd ("MIPS: seccomp: Handle indirect system calls (o32)") Cc: <stable@vger.kernel.org> # 3.15+ Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10951/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fixes from James Bottomley: "This has two libfc fixes for bugs causing rare crashes, one iscsi fix for a potential hang on shutdown, and a fix for an I/O blocksize issue which caused a regression" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: sd: Fix maximum I/O size for BLOCK_PC requests libfc: Fix fc_fcp_cleanup_each_cmd() libfc: Fix fc_exch_recv_req() error path libiscsi: Fix host busy blocking during connection teardown
-