This reverts commit 52429eb2.

On request from Alan Cox.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 7ea3a9ad.

On request from Alan Cox.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct will be kfreed in a moment, so...
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change forces the bits to 0 by using an &= operation with an inverted
mask of all options instead of using an |= with a value of 0.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a reference to a Buffer Size extention bit that is unneded by
82575/82576 hardware.  Since it is not needed it should be removed from the
code.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the netlink option for DCB is necessary to actually be useful,
simplified the Kconfig option.  In addition, added useful help text for the
Kconfig option.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add %pm to omit the colons when printing a mac address.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Made usb_drivers reset_resume function point to hso_resume this 
fixes problems a usb reset is done when the network interface
is left idle for a few minutes. Possibly reset_resume should
initialise hardware more but this works in the common case.
Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Makes TIOCM ioctls for Data Carrier Detect & related functions
work like /drivers/serial/serial-core.c potentially needed 
for pppd & similar user programs.   
Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A new structure hso_mutex_table had to be declared statically
& used as as hso_device mutex_lock(&serial->parent->mutex) etc
is freed in hso_serial_open & hso_serial_close by kref_put while
the mutex is still in use.

This is a substantial change but should make the driver much stabler.
Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added check for IFF_UP in hso_resume, this should eliminate -EINVAL (-22)
errors caused from urb's being submitted twice, once by hso_resume
& once in hso_net_open, if suspend/resume USB power saving  mode is enabled
Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Moved serial_open_count in hso_serial_open to
prevent crashes owing to the serial structure being made NULL
when hso_serial_close is called even though hso_serial_open
returned -ENODEV, Alan Cox pointed out this happens,
also put in sanity check in hso_serial_close
to check for a valid serial structure which should prevent
the most reproducable crash in the driver when the hso device
is disconnected while in use.
Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDenis Joseph Barrow <D.Barow@option.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a concession to vendors who have to deal with one source for different
kernel versions, add a HAVE_NET_DEVICE_OPS so they don't end up hard
coding ifdef against kernel version.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This caused me to get repeatably:

  tcpdump: pcap_loop: recvfrom: Bad address

Happens occassionally when I tcpdump my for-looped test xfers:
  while [ : ]; do echo -n "$(date '+%s.%N') "; ./sendfile; sleep 20; done

Rest of the relevant commands:
  ethtool -K eth0 tso off
  tc qdisc add dev eth0 root netem drop 4%
  tcpdump -n -s0 -i eth0 -w sacklog.all

Running net-next under kvm, connection goes to the same host
(basically just out of kvm). The connection itself works ok
and data gets sent without corruption even with a large
number of tests while tcpdump fails usually within less than
5 tests.

Whether it only happens because of this change or not, I
don't know for sure but it's the only thing with which
I've seen that error. The non-cloned variant works w/o it
for much longer time. I'm yet to debug where the error
actually comes from.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The earlier version was just very basic one which is "playing
safe" by always clearing the hints. However, clearing of a hint
is extremely costly operation with large windows, so it must be
avoided at all cost whenever possible, there is a way with
shifting too achieve not-clearing.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During SACK processing, most of the benefits of TSO are eaten by
the SACK blocks that one-by-one fragment SKBs to MSS sized chunks.
Then we're in problems when cleanup work for them has to be done
when a large cumulative ACK comes. Try to return back to pre-split
state already while more and more SACK info gets discovered by
combining newly discovered SACK areas with the previous skb if
that's SACKed as well.

This approach has a number of benefits:

1) The processing overhead is spread more equally over the RTT
2) Write queue has less skbs to process (affect everything
   which has to walk in the queue past the sacked areas)
3) Write queue is consistent whole the time, so no other parts
   of TCP has to be aware of this (this was not the case with
   some other approach that was, well, quite intrusive all
   around).
4) Clean_rtx_queue can release most of the pages using single
   put_page instead of previous PAGE_SIZE/mss+1 calls

In case a hole is fully filled by the new SACK block, we attempt
to combine the next skb too which allows construction of skbs
that are even larger than what tso split them to and it handles
hole per on every nth patterns that often occur during slow start
overshoot pretty nicely. Though this to be really useful also
a retransmission would have to get lost since cumulative ACKs
advance one hole at a time in the most typical case.

TODO: handle upwards only merging. That should be rather easy
when segment is fully sacked but I'm leaving that as future
work item (it won't make very large difference anyway since
this current approach already covers quite a lot of normal
cases).

I was earlier thinking of some sophisticated way of tracking
timestamps of the first and the last segment but later on
realized that it won't be that necessary at all to store the
timestamp of the last segment. The cases that can occur are
basically either:
  1) ambiguous => no sensible measurement can be taken anyway
  2) non-ambiguous is due to reordering => having the timestamp
     of the last segment there is just skewing things more off
     than does some good since the ack got triggered by one of
     the holes (besides some substle issues that would make
     determining right hole/skb even harder problem). Anyway,
     it has nothing to do with this change then.

I choose to route some abnormal looking cases with goto noop,
some could be handled differently (eg., by stopping the
walking at that skb but again). In general, they either
shouldn't happen at all or are rare enough to make no difference
in practice.

In theory this change (as whole) could cause some macroscale
regression (global) because of cache misses that are taken over
the round-trip time but it gets very likely better because of much
less (local) cache misses per other write queue walkers and the
big recovery clearing cumulative ack.

Worth to note that these benefits would be very easy to get also
without TSO/GSO being on as long as the data is in pages so that
we can merge them. Currently I won't let that happen because
DSACK splitting at fragment that would mess up pcounts due to
sk_can_gso in tcp_set_skb_tso_segs. Once DSACKs fragments gets
avoided, we have some conditions that can be made less strict.

TODO: I will probably have to convert the excessive pointer
passing to struct sacktag_state... :-)

My testing revealed that considerable amount of skbs couldn't
be shifted because they were cloned (most likely still awaiting
tx reclaim)...

[The rest is considering future work instead since I got
repeatably EFAULT to tcpdump's recvfrom when I added
pskb_expand_head to deal with clones, so I separated that
into another, later patch]

...To counter that, I gave up on the fifth advantage:

5) When growing previous SACK block, less allocs for new skbs
   are done, basically a new alloc is needed only when new hole
   is detected and when the previous skb runs out of frags space

...which now only happens of if reclaim is fast enough to dispose
the clone before the SACK block comes in (the window is RTT long),
otherwise we'll have to alloc some.

With clones being handled I got these numbers (will be somewhat
worse without that), taken with fine-grained mibs:

                  TCPSackShifted 398
                   TCPSackMerged 877
            TCPSackShiftFallback 320
      TCPSACKCOLLAPSEFALLBACKGSO 0
  TCPSACKCOLLAPSEFALLBACKSKBBITS 0
  TCPSACKCOLLAPSEFALLBACKSKBDATA 0
    TCPSACKCOLLAPSEFALLBACKBELOW 0
    TCPSACKCOLLAPSEFALLBACKFIRST 1
 TCPSACKCOLLAPSEFALLBACKPREVBITS 318
      TCPSACKCOLLAPSEFALLBACKMSS 1
   TCPSACKCOLLAPSEFALLBACKNOHEAD 0
    TCPSACKCOLLAPSEFALLBACKSHIFT 0
          TCPSACKCOLLAPSENOOPSEQ 0
  TCPSACKCOLLAPSENOOPSMALLPCOUNT 0
     TCPSACKCOLLAPSENOOPSMALLLEN 0
             TCPSACKCOLLAPSEHOLE 12
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is preparatory work for SACK combiner patch which may
have to count TCP state changes for only a part of the skb
because it will intentionally avoids splitting skb to SACKed
and not sacked parts.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sadly enough, this adds possible divide though we try to avoid
it by checking one mss as common case.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I knew already when rewriting the sacktag that this condition
was too conservative, change it now since it prevent lot of
useless work (especially in the sack shifter decision code
that is being added by a later patch). This shouldn't change
anything really, just save some processing regardless of the
shifter.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I always had thought that collapsing up to two at a time was
intentional decision to avoid excessive processing if 1 byte
sized skbs are to be combined for a full mtu, and consecutive
retransmissions would make the size of the retransmittee
double each round anyway, but some recent discussion made me
to understand that was not the case. Thus make collapse work
more and wait less.

It would be possible to take advantage of the shifting
machinery (added in the later patch) in the case of paged
data but that can be implemented on top of this change.

tcp_skb_is_last check is now provided by the loop.

I tested a bit (ss-after-idle-off, fill 4096x4096B xfer,
10s sleep + 4096 x 1byte writes while dropping them for
some a while with netem):

. 16774097:16775545(1448) ack 1 win 46
. 16775545:16776993(1448) ack 1 win 46
. ack 16759617 win 2399
P 16776993:16777217(224) ack 1 win 46
. ack 16762513 win 2399
. ack 16765409 win 2399
. ack 16768305 win 2399
. ack 16771201 win 2399
. ack 16774097 win 2399
. ack 16776993 win 2399
. ack 16777217 win 2399
P 16777217:16777257(40) ack 1 win 46
. ack 16777257 win 2399
P 16777257:16778705(1448) ack 1 win 46
P 16778705:16780153(1448) ack 1 win 46
FP 16780153:16781313(1160) ack 1 win 46
. ack 16778705 win 2399
. ack 16780153 win 2399
F 1:1(0) ack 16781314 win 2399

While without drop-all period I get this:

. 16773585:16775033(1448) ack 1 win 46
. ack 16764897 win 9367
. ack 16767793 win 9367
. ack 16770689 win 9367
. ack 16773585 win 9367
. 16775033:16776481(1448) ack 1 win 46
P 16776481:16777217(736) ack 1 win 46
. ack 16776481 win 9367
. ack 16777217 win 9367
P 16777217:16777218(1) ack 1 win 46
P 16777218:16777219(1) ack 1 win 46
P 16777219:16777220(1) ack 1 win 46
  ...
P 16777247:16777248(1) ack 1 win 46
. ack 16777218 win 9367
. ack 16777219 win 9367
  ...
. ack 16777233 win 9367
. ack 16777248 win 9367
P 16777248:16778696(1448) ack 1 win 46
P 16778696:16780144(1448) ack 1 win 46
FP 16780144:16781313(1169) ack 1 win 46
. ack 16780144 win 9367
F 1:1(0) ack 16781314 win 9367

The window seems to be 30-40 segments, which were successfully
combined into: P 16777217:16777257(40) ack 1 win 46
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can reduce pressure on dst entry refcount that slowdown UDP transmit
path on SMP machines. This pressure is visible on RTP servers when
delivering content to mediagateways, especially big ones, handling
thousand of streams. Several cpus send UDP frames to the same
destination, hence use the same dst entry.

This patch makes ip_push_pending_frames() steal the refcount its
callers had to take when filling inet->cork.dst.

This doesnt avoid all refcounting, but still gives speedups on SMP,
on UDP/RAW transmit path.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can reduce pressure on dst entry refcount that slowdown UDP transmit
path on SMP machines. This pressure is visible on RTP servers when
delivering content to mediagateways, especially big ones, handling
thousand of streams. Several cpus send UDP frames to the same
destination, hence use the same dst entry.

This patch makes ip_append_data() eventually steal the refcount its
callers had to take on the dst entry.

This doesnt avoid all refcounting, but still gives speedups on SMP,
on UDP/RAW transmit path
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gen_kill_estimator() linear lists lookups are very slow, and e.g. while
deleting a large number of HTB classes soft lockups were reported. Here
is another try to fix this problem: this time internally, with rbtree,
so similarly to Jamal's hashing idea IIRC. (Looking for next hits could
be still optimized, but it's really fast as it is.)
Reported-by: NBadalian Vyacheslav <slavon@bigtelecom.ru>
Reported-by: NDenys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Acked-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jarek Poplawski points out:

If all child qdiscs of sch_drr are non-work-conserving (e.g. sch_tbf)
drr_dequeue() will busy-loop waiting for skbs instead of leaving the
job for a watchdog. Checking for list_empty() in each loop isn't
necessary either, because this can never be true except the first time.

Using non-work-conserving qdiscs as children of DRR makes no sense,
simply bail out in that case.
Reported-by: NJarek Poplawski <jarkao2@gmail.com>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This use of netdev->priv is wrong.
The right way is:
alloc_netdev() with no memory for private data.
make netdev->ml_priv to point to c2_dev.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Acked-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. convert netdev->priv to netdev_priv().
2. make sbni_pci_probe() be static.
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Freeing previously allocated buffers in case of error.
Signed-off-by: NJirka Pirko <jirka@pirko.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pointed out by Joe Perches. Error message after tx_ring allocation check was
wrong.
Signed-off-by: NJirka Pirko <jirka@jirka.pirko.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixed typo when allocating rx_ring, tx_ring was checked for null instead.
Signed-off-by: NJirka Pirko <jirka@pirko.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of using call by reference use the PTR_ERR macros to handle
return value with error case. Compile tested only.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is still a call to sock_prot_inuse_add() in af_netlink
while in a preemptable section. Add explicit BH disable around
this call.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rule of calling sock_prot_inuse_add() is that BHs must
be disabled.  Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.

Fix this by adding explicit BH disabling around those call sites,
or moving sock_prot_inuse_add() call inside an existing BH disabled
section.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Linus mentioned we could try to perform long word operations, even
on potentially unaligned addresses, on x86 at least. David mentioned
the HAVE_EFFICIENT_UNALIGNED_ACCESS test to handle this on all
arches that have efficient unailgned accesses.

I tried this idea and got nice assembly on 32 bits:

158:   33 82 38 01 00 00       xor    0x138(%edx),%eax
15e:   33 8a 34 01 00 00       xor    0x134(%edx),%ecx
164:   c1 e0 10                shl    $0x10,%eax
167:   09 c1                   or     %eax,%ecx
169:   74 0b                   je     176 <eth_type_trans+0x87>

And very nice assembly on 64 bits of course (one xor, one shl)

Nice oprofile improvement in eth_type_trans(), 0.17 % instead of 0.41 %,
expected since we remove 8 instructions on a fast path.

This patch implements a compare_ether_addr_64bits() function, that
uses the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ifdef to efficiently
perform the 6 bytes comparison on all capable arches.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 4e4fd4e4 ("ne2k: convert to
net_device_ops") exported some ei_* symbols from the 8390 library,
but the axnet_cs driver defines local static versions of the same
functions.

Rename them to avoid the namespace conflict.

Reported by Stephen Rothwell.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The rule of calling sock_prot_inuse_add() is that BHs must
be disabled.  Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.

Fix this by adding explicit BH disabling around those call sites.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_net_set() should be the very first thing after alloc_netdev().

"ndo_" changes turned simple assignment (which is OK to do before netns
assignment) into quite non-trivial operation (which is not OK, init_net was
used). This leads to incomplete initialisation of tunnel device in netns.

BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<c02efdb5>] ip6_tnl_exit_net+0x37/0x4f
*pde = 00000000 
Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
last sysfs file: /sys/class/net/lo/operstate

Pid: 10, comm: netns Not tainted (2.6.28-rc6 #1) 
EIP: 0060:[<c02efdb5>] EFLAGS: 00010246 CPU: 0
EIP is at ip6_tnl_exit_net+0x37/0x4f
EAX: 00000000 EBX: 00000020 ECX: 00000000 EDX: 00000003
ESI: c5caef30 EDI: c782bbe8 EBP: c7909f50 ESP: c7909f48
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process netns (pid: 10, ti=c7908000 task=c7905780 task.ti=c7908000)
Stack:
 c03e75e0 c7390bc8 c7909f60 c0245448 c7390bd8 c7390bf0 c7909fa8 c012577a
 00000000 00000002 00000000 c0125736 c782bbe8 c7909f90 c0308fe3 c782bc04
 c7390bd4 c0245406 c084b718 c04f0770 c03ad785 c782bbe8 c782bc04 c782bc0c
Call Trace:
 [<c0245448>] ? cleanup_net+0x42/0x82
 [<c012577a>] ? run_workqueue+0xd6/0x1ae
 [<c0125736>] ? run_workqueue+0x92/0x1ae
 [<c0308fe3>] ? schedule+0x275/0x285
 [<c0245406>] ? cleanup_net+0x0/0x82
 [<c0125ae1>] ? worker_thread+0x81/0x8d
 [<c0128344>] ? autoremove_wake_function+0x0/0x33
 [<c0125a60>] ? worker_thread+0x0/0x8d
 [<c012815c>] ? kthread+0x39/0x5e
 [<c0128123>] ? kthread+0x0/0x5e
 [<c0103b9f>] ? kernel_thread_helper+0x7/0x10
Code: db e8 05 ff ff ff 89 c6 e8 dc 04 f6 ff eb 08 8b 40 04 e8 38 89 f5 ff 8b 44 9e 04 85 c0 75 f0 43 83 fb 20 75 f2 8b 86 84 00 00 00 <8b> 40 04 e8 1c 89 f5 ff e8 98 04 f6 ff 89 f0 e8 f8 63 e6 ff 5b 
EIP: [<c02efdb5>] ip6_tnl_exit_net+0x37/0x4f SS:ESP 0068:c7909f48
---[ end trace 6c2f2328fccd3e0c ]---
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>